Destructive tests are generally applied to evaluate the fixed strength of spot-welding nuggets of zinc-plated steel (which is a widely used primary structural material for automobiles). These destructive tests, however, are expensive and time-consuming. This paper proposes a nondestructive method for evaluating the fixed strength of the welded joints using surface electrical resistance. A direct current nugget-tester and probes have been developed by the authors for this purpose. The proposed nondestructive method uses the relative decrease in surface electrical resistance, α. The proposed method also considers the effect of the corona bond. The nugget diameter is estimated by two factors: RQuota, which is calculated from variation of resistance, and a constant that represents the area of the corona bond. Since the maximum tensile strength is correlated with the nugget diameter, it can be inferred from the estimated nugget diameter. When appropriate measuring conditions for the surface electrical resistance are chosen, the proposed method can effectively evaluate the fixed strength of the spot-welded joints even if the steel sheet is zinc-plated.

Issue Section:
Nde
Topics:
Electrical resistance, Electrical resistivity, Probes, Shear strength, Welded joints, Welding, Nondestructive evaluation, Cycles, Shear (Mechanics), Testing

References

1.
Oikawa
,
H.
,
Murayama
,
G.
,
Sakiyama
,
T.
,
Takahashi
,
Y.
, and
Ishikawa
,
T.
,
2006
, “
Resistance Spot Weidability of High Strength Steel (HSS) Sheets for Automobile
,”
Nippon Steel Technical Report No.
385
, pp.
36
–
41
.
2.
JIS Z 23144
,
1996
, “
Routine Test of Resistance Spot and Projection Welds
,”
The Japanese Standards Association
, pp.
732
–
743
.
3.
Takeo
,
F.
, and
Nakajima
,
K.
,
2003
, “
Application of Four-Point Probe Method to NDE of Case Depth on the Surface of Steel Hardened by the Induction Hardening Process
,”
J. Jpn. Soc. Nondestruct. Inspection
,
52
(
1
), pp.
39
–
44
.
4.
Mini
,
M.
,
1981
, “
Potentiometric Nondestructive Testing of Surface Hardened Materials
,”
Rev. Sci. Instrum.
,
52
(
7
), pp.
1057
–
1060
.
5.
JSNDI
,
1967
,
NDT Handbook
,
The Nikkan Kogyo Shimbun, Ltd.
,
Tokyo, Japan
, pp.
778
–
791
.
6.
Kojima
,
T.
,
Akamatsu
,
S.
, and
Iwata
,
M.
,
2006
, “
Non-Destructive Evaluation of Case Depth for Quenchied Steel Surface Using Electrical Potential Drop Technique With 6-Point Prove
,”
J. Jpn. Soc. Nondestruct. Inspection
,
55
(
11
), pp.
558
–
562
.
7.
Nagashima
,
Y.
,
Takahashi
,
F.
, and
Kawamata
,
Y.
,
1999
, “
Non-Destructive Measurement of Hardened Surface Layer Thickness With Velocity Change of Rayleigh Wave
,”
J. Jpn. Soc. Nondestruct. Inspection
,
48
(
9
), pp.
606
–
612
.
8.
Mihara
,
T.
,
Obata
,
M.
, and
Yamashita
,
M.
,
1989
, “
Measurement of Carburized Depth in Low Alloyed Steel by Using Attenuation Spectrum of Ultrasonic Ray Length Wave
,”
J. Jpn. Soc. Nondestruct. Inspection
,
38
(
10
), pp.
898
–
903
.
9.
Shimamoto
,
A.
,
Yamashita
,
K.
,
Kamio
,
Y.
,
Akamatsu
,
S.
, and
Iwata
,
M.
,
2008
, “
Quality Evaluation of Spot Welding by Surface Electric Resistance Measurement
,”
Proceedings of 39th Symposium on Stress-Strain Mesurement and Strength Evaluation
, pp. 137–142.
10.
Smits
,
F. M.
,
1958
, “
Measurement of Sheet Resistivities With the Four-Point Probe
,”
Bell Syst. Tech. J.
,
37
, pp.
711
–
718
.
Google Scholar
Crossref
Search ADS
 
11.
Shimamoto
,
A.
,
Yamashita
,
K.
,
Akamatsu
,
S.
, and
Iwata
,
M.
,
2009
, “
Non-Destructive Evaluation of Spot Welding Fixation Strength of Galvanized Sheet Steel With Surface Electric Resistance Method
,”
JSNDI Spring Conference 2009
, pp. 141–144.
12.
Ultrasonics
,
2005
,
Krautkramer USLT2000SP
,
GE Inspection Technologies
, pp.
2
–
6
.
13.
Ishikawa
,
M.
,
2005
, “
Inspection of Spot Welding Portion Using Ultrasonic Flaw Detector
,”
Weld. Techonol.
,
53
(
3
), pp.
112
–
117
.
14.
Okuda
,
T.
,
1986
,
Introduction to Spot Welding
,
Sanpo Publications, Inc.
, pp.
110
–
111
.
Copyright © 2013 by ASME
You do not currently have access to this content.