This paper presents failure investigation on reheater pendent SA213-T22 tubes through visual inspections, steam-side scale and tube wall thickness measurements, metallurgical examinations, and creep analysis. The investigations were carried out following subsequent tube failures of the reheater pendent region of a boiler unit. Interaction event of significant internal scale formation causing the higher metal temperature and external scale exfoliation as a result of high-temperature corrosion is identified to cause the failure of the reheater pendent tube. Prevention actions are recommended to avoid similar failures in the future.
Issue Section:
Materials and Fabrication
Keywords:
boilers,
corrosion,
creep,
failure analysis,
inspection,
metallurgy,
pipes,
preventive maintenance,
thickness measurement,
reheater pendent tube,
scale exfoliation,
scale formation,
metallurgical examination,
visual inspection
Topics:
Boilers,
Corrosion,
Creep,
Failure,
Incrustations,
Inspection,
Metals,
Steam,
Temperature,
Wall thickness,
High temperature,
Rupture
References
1.
Port
, R. D.
, and Herro
, H. M.
, 1991, The NALCO Guide to Boiler Failure Analysis
, Nalco Chemical Company/McGraw-Hill Inc.
, New York
.2.
French
, D. N.
, 2000, Metallurgical Failures in Fossil Fired Boilers
, A Wiley-Interscience Publication/John Wiley & Sons Inc.
, New York
.3.
Jones
, D. R. H.
, 2004, “Creep Failures of Overheated Boiler, Superheater and Reformer Tubes
,” Eng. Failure Anal.
, 11
, pp. 873
–893
. 4.
Purbolaksono
, J.
, Hong
, Y. W.
, Nor
S. S. M.
, Othman
, H.
, and Ahmad
, B.
, 2009, “Evaluation on Reheater Tube Failure
,” Eng. Failure Anal.
, 16
(1
), pp. 533
–537
. 5.
Ennis
, P. J.
, and Quadakkers
, W. J.
, 2007, “Implications of Steam Oxidation for the Service Life of High-Strength Martensitic Steel Components in High-Temperature Plant
,” Int. J. Pressure Vessels Piping
, 84
, pp. 82
–87
. 6.
Ranjbar
, K.
, 2006, “Failure Analysis of Boiler Cold and Hot Reheater Tubes
,” Eng. Failure Anal.
, 14
, pp. 620
–625
. 7.
Rehn
, I. M.
, Apblett
, W. R.
, Jr., and Stringer
, J.
, 1981, “Controlling Steamside Oxide Exfoliation in Utility Boiler Superheaters and Reheaters
,” Mater. Perform.
, 20
(6
), pp. 27
–31
.8.
Smith
, G. V.
, 1971, “Supplemental Report on the Elevated Temperature Properties of Chromium Molybdenum Steels
,” Metal Properties Council
, ASTM data series, American Society for Testing and Materials
, Philadelphia
, DS 6S1.9.
Basu
, F.
, 2006, Combustion and Gasification in Fluidized Beds
, Taylor & Francis
, Boca Raton
.Copyright © 2011
by American Society of Mechanical Engineers
You do not currently have access to this content.