In this study, both the lower and upper bound shakedown limits of a closed-end composite cylinder with or without a cross-hole subject to constant internal pressure and a cyclic thermal gradient are calculated by the linear matching method. Convergence for the upper and lower bound shakedown limits of the composite cylinders is sought and shakedown limit interaction diagrams of the numerical applications identifying the regions of reverse plasticity limit and ratchet limit are presented. The effects of temperature-dependent yield stress, material discontinuities, composite cylinder thickness, and the existence of the cross-hole on the shakedown limits are discussed for different geometry parameters. Finally, a safety shakedown envelope is created by formulating the shakedown limit results of different composite materials and cylinder thickness ratios with different cross-hole sizes.
Skip Nav Destination
e-mail: haofeng.chen@strath.ac.uk
Article navigation
June 2011
Research Papers
Shakedown Analysis of a Composite Cylinder With a Cross-Hole
Haofeng Chen,
Haofeng Chen
Department of Mechanical Engineering,
e-mail: haofeng.chen@strath.ac.uk
University of Strathclyde
, Glasgow G1 1XJ, UK
Search for other works by this author on:
Weihang Chen,
Weihang Chen
Department of Mechanical Engineering,
University of Strathclyde
, Glasgow G1 1XJ, UK
Search for other works by this author on:
Tianbai Li,
Tianbai Li
Department of Mechanical Engineering,
University of Strathclyde
, Glasgow G1 1XJ, UK
Search for other works by this author on:
James Ure
James Ure
Department of Mechanical Engineering,
University of Strathclyde
, Glasgow G1 1XJ, UK
Search for other works by this author on:
Haofeng Chen
Department of Mechanical Engineering,
University of Strathclyde
, Glasgow G1 1XJ, UKe-mail: haofeng.chen@strath.ac.uk
Weihang Chen
Department of Mechanical Engineering,
University of Strathclyde
, Glasgow G1 1XJ, UK
Tianbai Li
Department of Mechanical Engineering,
University of Strathclyde
, Glasgow G1 1XJ, UK
James Ure
Department of Mechanical Engineering,
University of Strathclyde
, Glasgow G1 1XJ, UKJ. Pressure Vessel Technol. Jun 2011, 133(3): 031206 (9 pages)
Published Online: April 4, 2011
Article history
Received:
April 23, 2010
Revised:
July 12, 2010
Online:
April 4, 2011
Published:
April 4, 2011
Citation
Chen, H., Chen, W., Li, T., and Ure, J. (April 4, 2011). "Shakedown Analysis of a Composite Cylinder With a Cross-Hole." ASME. J. Pressure Vessel Technol. June 2011; 133(3): 031206. https://doi.org/10.1115/1.4002264
Download citation file:
Get Email Alerts
Cited By
Surface Strain Measurement for Non-Intrusive Internal Pressure Evaluation of a Cannon
J. Pressure Vessel Technol (December 2024)
Dynamic Response and Damage Analysis of a Large Steel Tank Impacted by an Explosive Fragment
J. Pressure Vessel Technol (February 2025)
Related Articles
Ambient Temperature Creep of Type 304 Stainless Steel
J. Eng. Mater. Technol (April,2011)
Residual Stress in an Autofrettaged Tube Taking Bauschinger Effect as a Function of the Prior Plastic Strain
J. Pressure Vessel Technol (April,2009)
Closure to “Discussion of ‘A Paradox in Sliding Contact Problems With Friction’ ” ( 2006, ASME J. Appl. Mech., 73, pp. 884–886 )
J. Appl. Mech (September,2006)
Torsion/Simple Shear of Single Crystal Copper
J. Eng. Mater. Technol (July,2002)
Related Proceedings Papers
Related Chapters
Micromechanical Characterization of Nonlinear Behavior of Advanced Polymer Matrix Composites
Composite Materials: Testing and Design: Twelfth Volume
Microstructure Evolution and Physics-Based Modeling
Ultrasonic Welding of Lithium-Ion Batteries
Mechanical Behavior of Zircaloy-4 in the Presence of Hydrogen in Solid Solution at Elevated Temperatures
Zirconium in the Nuclear Industry: 20th International Symposium