Residual stresses have been introduced into a notched compact tension specimen of a 347 weld material by mechanical compression. The required level of compressive load has previously been determined from finite-element studies. The residual stress in the vicinity of the notch root has been measured using neutron diffraction and the results compared with those obtained from finite-element analysis. The effect of stress redistribution due to creep has been examined and it is found that a significant reduction in stress is measured after $1000h$ at $650°C$. The implications of these results with regard to the development of damage in the specimen due to creep relaxation are examined.

1.
O’Dowd
,
N. P.
,
Nikbin
,
K. M.
, and
Biglari
,
F. R.
, 2005, “
Creep Crack Initiation in a Weld Steel: Effects of Residual Stress
,”
Proceedings of the ASME Pressure Vessels and Piping Conference 2005 Materials and Fabrication (PVP2005)
, Denver, CO, July 17–21, 2005, pp.
843
851
.
2.
Sherry
,
A. H.
,
Turski
,
M.
,
Wilkes
,
M. A.
,
Beardsmore
,
D. W.
,
Withers
,
P. J.
, and
Bouchard
,
P. J.
, 2002, “
The Development of a Compact Specimen to Study the Influence of Residual Stresses on Fracture
,”
FESI Sixth International Conference on Engineering Structural Integrity Assessment
,
Manchester, UK
, Oct.
3.
Turski
,
M.
,
Sherry
,
A. H.
,
Bouchard
,
P. J.
, and
Withers
,
P. J.
, 2004, “
Residual Stress Driven Creep Cracking in Type 316 Stainless Steel
,”
J. Neutron Res.
1023-8166,
12
, pp.
45
49
.
4.
Spindler
,
M. W.
, 1997, “
The Elevated Temperature Properties of Type 347 Weld Metal
,” Nuclear Electric Limited Report No. EPD∕AGR∕REP∕0230∕97.
5.
RCC-MR, Section 1, Sub-Section Z, Technical Appendix A3, AFCEN, Paris, 1985.
6.
Cocks
,
A. C. F.
, and
Ashby
,
M. F.
, 1980, “
Intergranular Fracture in Power Law Creep Under Multiaxial Stress
,”
Met. Sci.
0306-3453,
14
, pp.
395
402
.
7.
Hibbitt, Karlsson & Sorensen Inc., 2003, ABAQUS Version 6.4.1.
8.
Wimpory
,
R. C.
,
Biglari
,
F. R.
,
Schneider
,
R.
,
Nikbin
,
K. M.
, and
O’Dowd
,
N. P.
, 2006, “
Effect of Residual Stress on High Temperature Deformation in a Weld Stainless Steel
,”
Mater. Sci. Forum
0255-5476,
524–525
, pp.
311
316
.