Light-weight high pressure vessels are recently in demand mainly because of the need to replace gasoline engines with hydrogen fuel cells. One of the main problems delaying this transition is our inability to store sufficient hydrogen in automobiles without (1) sacrificing safety and cabin space and (2) achieving the same driving range and performance as gasoline-powered vehicles. While hydrogen is more efficient as a fuel than gasoline and has zero greenhouse gas emissions, it occupies a larger volume and violently explodes in contact with air. Thus, hydrogen tanks are significantly larger and heavier than those of gasoline. Storage of compressed fluids has always relied on round tanks because of their high membrane resistance and low surface-to-volume ratios. Multilayered composite and metal designs are then used to reinforce and reduce their weight. Apparently, the best idea—but still early in its development—is to store hydrogen based on metal hydrides. Nevertheless, we present a new concept of replacing conventional hydrogen tanks with tanks that are internally reinforced by space-filling skeletons or simply with strut/shell networks. This enables designs of lighter, stronger tanks with shapes that can fit into nonfunctional regions of the vehicle to significantly increase storage volume. This approach promises immediate integration with existing storage technologies. Treating the reinforced vessel as joined plates on elastic foundations, we analyze cylindrical and rectangular tanks and show that the idea is more efficient in terms of pressure gain and weight reduction in the latter because large wall deformations favor the skeleton reinforcement. This result validates the skeleton reinforcement idea, and its practicality is discussed.
Skip Nav Destination
Article navigation
August 2008
Research Papers
Pressure Vessels With Reinforcing Space-Filling Skeletons
Mulalo Doyoyo,
Mulalo Doyoyo
School of Civil and Environmental Engineering,
Georgia Institute of Technology
, Atlanta, GA 30332
Search for other works by this author on:
Nadia Faure
Nadia Faure
Department of Mechanics,
Ecole Polytechnique
, 91128 Palaiseau, France
Search for other works by this author on:
Mulalo Doyoyo
School of Civil and Environmental Engineering,
Georgia Institute of Technology
, Atlanta, GA 30332
Nadia Faure
Department of Mechanics,
Ecole Polytechnique
, 91128 Palaiseau, FranceJ. Pressure Vessel Technol. Aug 2008, 130(3): 031210 (11 pages)
Published Online: August 7, 2008
Article history
Received:
August 27, 2006
Revised:
February 26, 2007
Published:
August 7, 2008
Citation
Doyoyo, M., and Faure, N. (August 7, 2008). "Pressure Vessels With Reinforcing Space-Filling Skeletons." ASME. J. Pressure Vessel Technol. August 2008; 130(3): 031210. https://doi.org/10.1115/1.2965902
Download citation file:
Get Email Alerts
Cited By
Surface Strain Measurement for Non-Intrusive Internal Pressure Evaluation of a Cannon
J. Pressure Vessel Technol (December 2024)
Dynamic Response and Damage Analysis of a Large Steel Tank Impacted by an Explosive Fragment
J. Pressure Vessel Technol (February 2025)
Related Articles
High Pressure Hydrogen Storage Tank: A Parametric Design Study
J. Pressure Vessel Technol (February,2007)
The Beneficial Contribution of Realistic Autofrettage to the Load-Carrying Capacity of Thick-Walled Spherical Pressure Vessels
J. Pressure Vessel Technol (February,2010)
Autofrettage and Reautofrettage of a Spherical Pressure Vessel
J. Pressure Vessel Technol (February,2007)
A Short History of High Pressure Technology From Bridgman to Division 3
J. Pressure Vessel Technol (August,2000)
Related Proceedings Papers
Related Chapters
New Guidelines on Assessing the Risk of Fatigue Failure and Remaining Life of Ageing Pressure Vessels:
Ageing and Life Extension of Offshore Facilities
Safety of Personnel Using Quick-Actuating Closures on Pressure Vessels and Associated Litigation Issues
Online Companion Guide to the ASME Boiler & Pressure Vessel Codes
Section VIII–Division I: Rules for Construction of Pressure Vessels
Online Companion Guide to the ASME Boiler & Pressure Vessel Codes