Elastic stress concentration factors (SCFs) for internally pressurized thick cylindrical vessels with oblique circular crossholes are reported. Results of finite-element analyses for two wall ratios ( equal to 2.25 and 4.5) and a range of crosshole ratios ( from 0.1 to 0.5) show that SCFs sharply increase with the inclination of the crosshole axis. These findings are consistent with earlier empirical design guidelines based on experimental investigations.
Issue Section:
Design and Analysis
1.
Pilkey
, W. D.
, 1997, Peterson’s Stress Concentration Factors
, 2nd ed., Wiley-Interscience
, New York
.2.
Makulsawatudom
, P.
, Mackenzie
, D.
, and Hamilton
, R.
, 2004, “Stress Concentration at Crossholes in Thick Cylindrical Vessels
,” J. Strain Anal. Eng. Des.
0309-3247, 39
(5
), pp. 471
–481
.3.
Stanley
, P.
, and Starr
, A. G.
, 2000, “Stress Concentrations at an Oblique Hole in a Thick Plate
,” J. Strain Anal. Eng. Des.
0309-3247, 35
(2
), pp. 143
–147
.4.
Quinn
, S.
, and Dulieu-Barton
, J. M.
, 2004, “Stress Analysis of Holes in Thick Plates
,” Applied Mechanics and Materials
, 1–2
, pp. 153
–158
.5.
Quinn
, S.
, and Dulieu-Barton
, J. M.
, 2002, “Determination of Stress Concentration Factors for Holes in Cylinders Using Thermoelastic Stress Analysis
,” Strain
, 38
, pp. 105
–118
.6.
Masu
, L. M.
, 1997, “Cross Bore Configuration and Size Effects on the Stress Distribution in Thick-Walled Cylinders
,” Int. J. Pressure Vessels Piping
0308-0161, 72
, pp. 171
–176
.7.
Masu
, L. M.
, 1998, “Numerical Analysis of Cylinders Containing Circular Offset Cross-Bores
,” Int. J. Pressure Vessels Piping
0308-0161, 75
, pp. 191
–196
.8.
Kihiu
, J. M.
, Rading
, G. O.
, and Mutuli
, S. M.
, 2003, “Geometric Constants in Plain Cross-Bored Cylinders
,” ASME J. Pressure Vessel Technol.
0094-9930, 125
, pp. 446
–453
.9.
Dixon
, R. D.
, Peters
, D. T.
, and Keltjens
, J. G. M.
, 2004, “Stress Concentration Factors of Cross-Bores in Thick Walled Cylinders and Blocks
,” ASME J. Pressure Vessel Technol.
0094-9930, 126
, pp. 184
–187
.10.
Grover
, S. M.
, 2004, “Computational Study of Stress Concentration About an Oblique Hole in a Thick Walled Tube: Toward Understanding Structural Improvements in Bone
,” Ph.D. thesis, University of Florida.11.
Mershon
, J. L.
, 1970, “Interpretive Report on Oblique Nozzle Connections in Pressure Vessel Heads and Shells Under Internal Pressure Loading
,” Weld. Res. Counc. Bull.
0043-2326, 153
, pp. 1
–31
.12.
Ellyin
, F.
, 1970, “Elastic Stresses Near a Skewed Hole in a Flat Plate and Applications to Oblique Nozzle Attachments in Shells
,” Weld. Res. Counc. Bull.
0043-2326, 153
, pp. 32
–51
.13.
2003, FEMLAB, Multiphysics Modeling, Version 3.1, COMSOL, Inc.
14.
2003, ANSYS, Multiphysics Version 8.0, ANSYS, Inc.
Copyright © 2008
by American Society of Mechanical Engineers
You do not currently have access to this content.
