The angled crack problem has been given special attention in the recent years by fracture mechanics investigators due to its close proximity to realistic conditions in engineering structures. In the present paper, an investigation of fatigue crack initiation and propagation in line pipes containing an inclined surface crack is presented. The inclined angle of the surface crack with respect to the axis of loading varies between $0deg$ and $90deg$. Based on the concept of the effective stress intensity factor range $Δkeff$, the rate of fatigue crack propagation $db∕dN$ is postulated to be a function of the effective strain energy density factor range $ΔSeff$. This concept is applied to predict the crack growth due to fatigue loading. Furthermore, the threshold condition for nongrowth of the initial crack was established and assessed based on the experimental data.

1.
Schwalbe
,
K. H.
, 1977, “
Some Aspects of Crack Propagation Under Monotonic and Cyclic Load
,”
Eng. Fract. Mech.
0013-7944,
9
, pp.
547
556
.
2.
Beghini
,
M.
, and
Bertini
,
L.
, 1996, “
Effective Stress Intensity Factor and Contact Stress for a Partially Closed Griffith Crack in Bending
,”
Eng. Fract. Mech.
0013-7944,
54
(
5
), pp.
667
678
.
3.
Sih
,
G. C.
, 1973, “
Some Basic Problems in Fracture Mechanics and New Concepts
,”
Eng. Fract. Mech.
0013-7944,
5
, pp.
365
377
.
4.
Koo
,
J. M.
, and
Choy
,
Y. S.
, 1991, “
New Mixed Mode Fracture Criterion. Maximum Tangential Strain Energy Density Criterion
,”
Eng. Fract. Mech.
0013-7944,
39
(
3
), pp.
443
449
.
5.
Lugg
,
M. C.
, 1992,
An Introduction to AC Potential Drop (ACPD)
,
Technical Software Consultants Ltd.
,
UK
.
6.
Sih
,
G. C.
, and
Barthelemy
,
B. M.
, 1980, “
Mixed Mode Fatigue Crack Growth Predictions
,”
Eng. Fract. Mech.
0013-7944,
13
, pp.
439
451
.
7.
Sih
,
G. C.
, 1974, “
Strain-Energy-Density Factor Applied to Mixed Mode Crack Problems
,”
Int. J. Fract.
0376-9429,
10
(
3
), pp.
305
321
.
8.
Qian
,
J.
, and
Fatemi
,
A.
, 1996, “
,”
Fatigue Fract. Eng. Mater. Struct.
8756-758X,
19
(
10
), pp.
1277
1284
.
9.
Bian
,
L.
, and
Lim
,
J. K.
, 2003, “
Fatigue Strength and Stress Concentration Factors of CHS-to-RHS T-Joints
,”
J. Constr. Steel Res.
0143-974X,
59
(
5
), pp.
627
640
.
10.
Sih
,
G. C.
, 1975, “
Three Dimensional Crack Problems
,” in
Mechanics of Fracture
,
Noordhoff
,
Netherlands
, Vol.
2
.
11.
Erdogan
,
F.
, and
Sih
,
G. C.
, 1963, “
On the Crack Extension in Plates Under Plane Loading and Transverse Shear
,”
ASME J. Basic Eng.
0021-9223,
85D
, pp.
519
527
.