The precipitation characteristics of tetrahedrally close-packed (TCP) phases during the welding and the subsequent solution annealing process of Alloy 22 1 thick plate double-U prototypical welds are investigated. Electron backscatter diffraction was used to provide large scale microstructural observation of the weld cross section, and scanning electron microscopy was used to map the location of the TCP phases. Analysis shows that TCP precipitation occurs congruent to the weld passes, with the solution annealing reducing the sizes of coarser precipitates.
Issue Section:
Research Papers
1.
Dunn
, D.
, Cragnolino
, G.
, and Sridhar
, N.
, 2000, “Passive Dissolution and Localized Corrosion of Alloy 22 Hight-Level Waste Container Weldments
,” Scientific Basis for Nuclear Waste Management XXIII
, Materials Research Society
, Warrendale, PA, 608
, pp. 89
–94
.2.
Rebak
, R.
, Koon
, N.
, Dillman
, J.
, and Crook
, P.
, 2000, “Influence of Aging on Microstructure, Mechanical Properties, and Corrosion Resistance of a Ni-22CR-13Mo-3W Alloy
,” Corrosion/2000
, NACE International
, Houston, TX, paper 181
.3.
Manning
, P.
, and Schöbel
, J.
, 1986, “HASTELLOY® Alloy C-22-ein Neuer und Vielseitig Anwendbarer Werkstoff für die Chemische Industrie
,” Werkst. Korros.
0043-2822, 37
, pp. 137
–145
.4.
Asphahani
, I.
, 1989, Arabian J. Sci. Eng.
0377-9211, 14
(2
), pp. 317
–335
.5.
Rebak
, R.
, 1998, Passivity and Localized Corrosion
, The Electrochemical Society
, Pennington, NJ, 97-26
, p. 1001
.6.
Rebak
, R.
, and Koon
, N.
, 1998, “Localized Corrosion Resistance of High Nickel Alloys as Candidate Materials for Nuclear Waste Repository. Effect of Alloy and Weldment Aging at 427 C for up to 40,000 hours
,” Corrosion/98
, NACE International
, Houston, TX, paper 153
.7.
Gruss
, K.
, Cragnolino
, G.
, Dunn
, D.
, and Sridhar
, N.
, 1998, “Repassivation Potential for Localized Corosion of Alloys 625 and C22 in Simulated Repository Environments
,” Corrosion/98
, NACE International
, Houston, TX, paper 149
.8.
Rebak
, R.
, and Crook
, P.
, 1999, Critical Factors in Localized Corrosion III
, The Electrochemical Society
, Pennington, NJ, 98-17
, p. 289
.9.
Cieslak
, M. J.
, Headley
, T. J.
, and Romig
, A. D.
, 1986, “The Welding Metallurgy of Hastelloy Alloys C-4, C-22 and C-276
,” Metall. Trans. A
0360-2133, 17A
, pp. 2035
–2047
.10.
Rebak
, R.
, and Crook
, P.
, 2002, “Mechanical Properties and Corrosion Characteristics of Thermally Aged Alloy 22
,” Transportation, Storage, and Disposal of Radioactive Materials
, ASME International
, New York, NY, PVP-449
, pp. 111
–117
.11.
Haynes International, 1997, Hastelloy C-22 Alloy, Kokomo, IN, p.
16
.12.
SFA-5.14, ERNiCrMo-10
, ASME International
, New York, NY, 2004, Sect. II, p. 325
.13.
Wright
, S. I.
, and Adams
, B. L.
, 1992, “Automatic Analysis of Electron Backscatter Diffraction Patterns
,” Metall. Trans. A
0360-2133, 23A
, pp. 759
–767
.14.
Adams
, B. L.
, Wright
, S. I.
, and Kunze
, K.
, 1993, “Orientation Imaging: The Emergence of a New Microscopy
,” Metall. Trans. A
0360-2133, 24A
, pp. 819
–831
.Copyright © 2006
by American Society of Mechanical Engineers
You do not currently have access to this content.