Background: Since the Hanshin-Awaji Earthquake Disaster, the number of isolated structures has been greatly increased. The natural period of the isolation system is designed around , because the predominate period of observed seismic waves is usually 0.1 to . However, relatively long period seismic waves have been observed in various earthquakes, and the resonances of long-period structures, such as high-rise buildings, during earthquakes have been reported at the same time. Therefore the natural period needs to be extended. When extending the natural period of the isolated structure using rubber bearings, its stiffness needs to be reduced. It is more difficult to extend the natural period of the isolation system than the conventional system because of a buckling problem. Therefore we propose a super-long-period active seismic isolation system as a new method for extending the natural period of the isolated structure. This system consists of rubber bearings and hydraulic actuators. Method of approach: In this study, we designed a control system by using the model matching method. This is one of the classical control system design methods. Additionally we applied a genetic algorithm (GA) to select parameters of a transfer function. Results: The system designed by applying the GA could reduce response acceleration sufficiently compared with the input acceleration. Further waveforms of the response acceleration retain almost straight forwardly, so this indicates good performance of isolation. Therefore, application of super-long-period active isolation is an effective technique to improve the performance of isolation. However, the control forces are big, and the system needs for the El Centro NS wave as control force. This force is equivalent to 21 actuators that are used in a large shake table, so there are few possibilities to realize active isolation. Conclusion: The required control force of hydraulic actuators is big, although the super-long-period active isolation system possesses good performance of isolation compared with the conventional isolation system. Therefore it is difficult to apply this isolation system to the real structure. However, the problem regarding requirements of the actuator should be solved because of the realization of an active seismic isolation system. Therefore, we will examine for the parameters of the system and semi-active isolation system.
Skip Nav Destination
e-mail: 04gdm01@ed.cck.dendai.ac.jp
e-mail: sfujita@cck.dendai.ac.jp
Article navigation
November 2006
Research Papers
Fundamental Study on the Super-Long-Period Active Isolation System
Keisuke Minagawa,
Keisuke Minagawa
Graduate School of Engineering,
e-mail: 04gdm01@ed.cck.dendai.ac.jp
Tokyo Denki University
, 2-2 Kanda-Nishiki-cho, Chiyoda-ku, Tokyo 101-8457, Japan
Search for other works by this author on:
Satoshi Fujita
Satoshi Fujita
Professor
Department of Mechanical Engineering,
e-mail: sfujita@cck.dendai.ac.jp
Tokyo Denki University
, 2-2 Kanda-Nishiki-cho, Chiyoda-ku, Tokyo 101-8457, Japan
Search for other works by this author on:
Keisuke Minagawa
Graduate School of Engineering,
Tokyo Denki University
, 2-2 Kanda-Nishiki-cho, Chiyoda-ku, Tokyo 101-8457, Japane-mail: 04gdm01@ed.cck.dendai.ac.jp
Satoshi Fujita
Professor
Department of Mechanical Engineering,
Tokyo Denki University
, 2-2 Kanda-Nishiki-cho, Chiyoda-ku, Tokyo 101-8457, Japane-mail: sfujita@cck.dendai.ac.jp
J. Pressure Vessel Technol. Nov 2006, 128(4): 502-507 (6 pages)
Published Online: December 14, 2005
Article history
Received:
September 21, 2004
Revised:
December 14, 2005
Citation
Minagawa, K., and Fujita, S. (December 14, 2005). "Fundamental Study on the Super-Long-Period Active Isolation System." ASME. J. Pressure Vessel Technol. November 2006; 128(4): 502–507. https://doi.org/10.1115/1.2349555
Download citation file:
Get Email Alerts
Cited By
Influence of water cover on the blast resistance of circular plates
J. Pressure Vessel Technol
Dynamic response and damage analysis of a large steel tank impacted by an explosive fragment
J. Pressure Vessel Technol
Surface Strain Measurement for Non-Intrusive Internal Pressure Evaluation of A Cannon
J. Pressure Vessel Technol
Related Articles
An Active Microvibration Isolation System for Hi-tech Manufacturing Facilities
J. Vib. Acoust (April,2001)
Robust Feedback Control of a Baffled Plate via Open-Loop Optimization
J. Vib. Acoust (January,2002)
Design and Experimental Analysis of Origami-Inspired Vibration Isolator With Quasi-Zero-Stiffness Characteristic
J. Vib. Acoust (October,2017)
Modal Methodology for the Simulation and Optimization of the Free-Layer Damping Treatment of a Car Body
J. Vib. Acoust (April,2010)
Related Proceedings Papers
Related Chapters
Smart Semi-Active Control of Floor-Isolated Structures
Intelligent Engineering Systems Through Artificial Neural Networks, Volume 17
Graphical Methods for Control Systems
Introduction to Dynamics and Control in Mechanical Engineering Systems
A Self-Adaptive Illumination Control System Based on Genetic Algorithm for Image Measurement
International Conference on Mechanical Engineering and Technology (ICMET-London 2011)