In many cases apparently complex interactions between a coating and a substrate may be reduced to a combination of two simple loading scenarios, namely, constant direct stress and linearly varying direct stress applied to the edges of the coating. Stresses within and around coatings are carefully and critically examined. Stress functions incorporating analytical limits are presented for the case of constant and linearly varying direct stress applied to the edge of a coating. Results provide accurate interfacial peeling and shear stresses, and were compared to equivalent finite element (FE) solutions. A technique is proposed for extrapolation of FE results that permits recovery of limiting values. Results were also compared to other recently published data. It is shown that inappropriate use of two sets of results may have produced erroneous interpretations. The particular case of a thin coating prone to craze-cracking is addressed. Direct stress at the free surface of a craze-cracked coating is a strong function of “island” size. In particular, the direct stress at the centerline of such a coating is compressive for island width of coating thickness; this may help to explain the relative dimensions of craze cracking.
Skip Nav Destination
e-mail: tony_parker@tesco.net
Article navigation
Research Papers
A Critical Examination of Stresses Within and Around Coatings
Anthony P. Parker,
Anthony P. Parker
Defence Academy of the United Kingdom,
e-mail: tony_parker@tesco.net
Cranfield University
, Swindon, SN6 8LA, United Kingdom
Search for other works by this author on:
Rolf R. de Swardt
Rolf R. de Swardt
Search for other works by this author on:
Anthony P. Parker
Defence Academy of the United Kingdom,
Cranfield University
, Swindon, SN6 8LA, United Kingdome-mail: tony_parker@tesco.net
Rolf R. de Swardt
J. Pressure Vessel Technol. May 2006, 128(2): 267-272 (6 pages)
Published Online: January 8, 2006
Article history
Received:
November 18, 2005
Revised:
January 8, 2006
Citation
Parker, A. P., and de Swardt, R. R. (January 8, 2006). "A Critical Examination of Stresses Within and Around Coatings." ASME. J. Pressure Vessel Technol. May 2006; 128(2): 267–272. https://doi.org/10.1115/1.2172615
Download citation file:
Get Email Alerts
Cited By
Surface Strain Measurement for Non-Intrusive Internal Pressure Evaluation of a Cannon
J. Pressure Vessel Technol (December 2024)
Dynamic Response and Damage Analysis of a Large Steel Tank Impacted by an Explosive Fragment
J. Pressure Vessel Technol (February 2025)
Related Articles
A Numerical Study of the Contact Mechanics and Sub-Surface Stress Effects Experienced Over a Range of Machined Surface Coatings in Rough Surface Contacts
J. Tribol (October,2003)
A Stretch/Bend Method for In Situ Measurement of the Delamination Toughness of Coatings and Films Attached to Substrates
J. Appl. Mech (January,2011)
Delamination of Compressively Stressed Orthotropic Functionally Graded Material Coatings Under Thermal Loading
J. Appl. Mech (September,2008)
Mixed-Mode Fracture Analysis of Orthotropic Functionally Graded Material Coatings Using Analytical and Computational Methods
J. Appl. Mech (September,2008)
Related Proceedings Papers
Related Chapters
Technical Overview on Mechanical and Physical Property Measurements on Coatings
Testing of Metallic and Inorganic Coatings
Subsection NB—Class 1 Components
Companion Guide to the ASME Boiler & Pressure Vessel Code, Volume 1, Second Edition
Stress Analysis of Gas Turbine Blade under Different Loads Using Finite Element Modeling
International Conference on Mechanical and Electrical Technology, 3rd, (ICMET-China 2011), Volumes 1–3