The finite element alternating method (FEAM), in conjunction with the finite element analysis (FEA) and the analytical solution for an elliptical crack in an infinite solid subject to arbitrary crack-face traction, is used for evaluating the stress intensity factor (SIF) of surface cracks in a cylinder. The major advantage of this method is that the SIF can be calculated by using the FEA results for an uncracked body. A newly developed system allows the FEAM to be performed by a simple method, which consists of the conventional FEA for an uncracked body and a subroutine for the FEAM alternating procedure. It is shown that the system can derive the precise SIF of circumferential, longitudinal, and inclined surface cracks in a cylinder. The crack growth predictions are performed for an inclined crack and projected longitudinal and circumferential crack in a cylinder. The results suggests that the crack characterizing procedure prescribed in Sec. XI may cause an unconservative evaluation in the crack growth prediction, and that the FEAM is valid for complex problems, to which the SIF evaluation by the FEA cannot be adopted easily.
Skip Nav Destination
e-mail: kamaya@inss.co.jp
Article navigation
Research Papers
Analysis of Surface Crack in Cylinder by Finite Element Alternating Method
Masayuki Kamaya,
e-mail: kamaya@inss.co.jp
Masayuki Kamaya
Institute of Nuclear Safety System, Inc. (INSS)
, 64 Sata, Mihama-cho, Fukui 919-1205, Japan
Search for other works by this author on:
Toshihisa Nishioka
Toshihisa Nishioka
Kobe University
, 5-1-1 Fukaeminamimachi, Higashinada-ku, Kobe 685-0022, Japan
Search for other works by this author on:
Masayuki Kamaya
Institute of Nuclear Safety System, Inc. (INSS)
, 64 Sata, Mihama-cho, Fukui 919-1205, Japane-mail: kamaya@inss.co.jp
Toshihisa Nishioka
Kobe University
, 5-1-1 Fukaeminamimachi, Higashinada-ku, Kobe 685-0022, JapanJ. Pressure Vessel Technol. May 2005, 127(2): 165-172 (8 pages)
Published Online: January 31, 2005
Article history
Received:
October 28, 2003
Revised:
January 31, 2005
Citation
Kamaya, M., and Nishioka, T. (January 31, 2005). "Analysis of Surface Crack in Cylinder by Finite Element Alternating Method." ASME. J. Pressure Vessel Technol. May 2005; 127(2): 165–172. https://doi.org/10.1115/1.1903003
Download citation file:
Get Email Alerts
Measurement of Steam-Generator-Tube Vibration Damping Caused by Anti-Vibration-Bar Supports
J. Pressure Vessel Technol (February 2025)
Related Articles
A Combination Rule for Circumferential Surface Cracks on Pipe Under Tension Based on Limit Load Analysis
J. Pressure Vessel Technol (April,2011)
Influence of the Interaction on Stress Intensity Factor of Semielliptical Surface Cracks
J. Pressure Vessel Technol (February,2008)
Leak Before Break Analysis of Steam Generator Shell Nozzle Junction for Sodium Cooled Fast Breeder Reactor
J. Pressure Vessel Technol (April,2012)
A Criterion for Combination Rule in Flaw Assessment of Parallel Surface Cracks
J. Pressure Vessel Technol (December,2011)
Related Proceedings Papers
Related Chapters
Three-Dimensional Cracked Configurations
The Stress Analysis of Cracks Handbook, Third Edition
Subsection NB—Class 1 Components
Companion Guide to the ASME Boiler & Pressure Vessel Code, Volume 1, Second Edition
Stress Analysis of Gas Turbine Blade under Different Loads Using Finite Element Modeling
International Conference on Mechanical and Electrical Technology, 3rd, (ICMET-China 2011), Volumes 1–3