The purpose of this paper is to provide research results for a cylindrical vessel—30 deg lateral intersection with diameter ratio under increasing internal pressure loading. The results include those from tests as well as from an inelastic stress analysis. The experimentally determined limit load is compared with that from the finite element analysis. The stress concentration factor, the spread of the plastic area, and the behavior of the deformation are provided. Also, a burst test of the model vessel is carried out to provide some data to justify the existing design method and forms a basis for developing an advanced design guideline for cylindrical vessel—lateral intersection under internal pressure loading.
Limit and Burst Pressures for a Cylindrical Vessel With a 30 deg—Lateral
Contributed by the Pressure Vessels and Piping Division for publication in the JOURNAL OF PRESSURE VESSEL TECHNOLOGY. Manuscript received by the PVP Division September 4, 2002; revision received December 8, 2003. Review conducted by: G. L. Hollinger.
- Views Icon Views
- Share Icon Share
- Cite Icon Cite
- Search Site
Sang , Z. F., Lin, Y. J., Xue , L. P., and Widera , G. E. O. (March 15, 2005). "Limit and Burst Pressures for a Cylindrical Vessel With a 30 deg—Lateral ." ASME. J. Pressure Vessel Technol. February 2005; 127(1): 61–69. https://doi.org/10.1115/1.1845477
Download citation file:
- Ris (Zotero)
- Reference Manager