The detonation pressure from the steady detonation of high explosives is a characteristic. Nevertheless, in materials processing using high explosives, there are cases when the detonation pressure does not match the intended pressure. In this investigation, as a new method of generating the overdriven detonation effectively, a double cylindrical high explosive set up using two kinds of explosives was developed, and its basic performance is analyzed. The concentric double cylindrical high explosive set up was composed of a high velocity explosive and a low velocity explosive, and the overdriven detonation was performed in the low velocity explosive. In this experiment, the ion gap was set up in the high velocity explosive and low velocity explosive respectively, and the detonation velocity was measured. The detonation pressure was also measured by setting up a manganin gauge (Kyowa Electric Instrument Co., Ltd.,) at the position where the generation of the overdriven detonation phenomenon was expected. Furthermore, the overdriven detonation process of the concentric double cylindrical high explosive was continually observed by numerical analysis and the framing photography. From the experimental results, the very high pressure region including the mach stem was observed in the low velocity explosive, and the overdriven detonation phenomenon was confirmed. The maximum pressure value of the concentric double cylindrical high explosive set up was 2.3 times higher than the Chapman-Jouguet pressure of the single explosive.
The Performance of Pressure Vessel Using Concentric Double Cylindrical High Explosive
Contributed by the Pressure Vessels and Piping Division for publication in the JOURNAL OF PRESSURE VESSEL TECHNOLOGY. Manuscript received by the PVP Division November 17, 2003; revision received May 30, 2004. Associate Editor: W. L. Cheng.
- Views Icon Views
- Share Icon Share
- Cite Icon Cite
- Search Site
Hamada, T., Nakamura, Y., and Itoh, S. (December 1, 2004). "The Performance of Pressure Vessel Using Concentric Double Cylindrical High Explosive ." ASME. J. Pressure Vessel Technol. November 2004; 126(4): 409–413. https://doi.org/10.1115/1.1804201
Download citation file:
- Ris (Zotero)
- Reference Manager