An explosive configuration was studied so that the underwater shock wave converges at the tip of the explosive, and a three-dimensional spiral configuration was obtained. This spiral configuration need to be analyzed theoretically due to the relation of propagation velocity of underwater shock wave, detonation velocity of the explosive and a configuration of vessel to charge the explosive. In order to study an effect of the convergence, pressure measurement at the spiral center was carried out by using a manganin gauge. Therefore, when SEP was used in this experiment, the maximum pressure value was 17.7 GPa. This maximum pressure value is higher than the pressure value of underwater shock wave generated from the underwater explosion of a straight configuration. Furthermore, this maximum pressure value was higher than C-J pressure of SEP. An initial pressure of underwater shock water shock wave that can obtain from an isentropic expansion curve of SEP and a characteristic curve of water is 5.7 GPa, and C-J pressure of SEP is 15.9 GPa. From the above-mentioned, the effect of spiral convergence could be shown well.
High Pressure Generation Using Underwater Explosion of a Spiral Explosive in a Conical Vessel
Contributed by the Pressure Vessels and Piping Division for publication in the JOURNAL OF PRESSURE VESSEL TECHNOLOGY. Manuscript received by the PVP Division May 27, 2003; revised manuscript received June 22, 2003. Associate Editor: S. Y. Zamrik.
- Views Icon Views
- Share Icon Share
- Cite Icon Cite
- Search Site
Hamada, T., Itoh, S., Murata , K., and Kato , Y. (May 5, 2004). "High Pressure Generation Using Underwater Explosion of a Spiral Explosive in a Conical Vessel ." ASME. J. Pressure Vessel Technol. May 2004; 126(2): 258–263. https://doi.org/10.1115/1.1687385
Download citation file:
- Ris (Zotero)
- Reference Manager