The effect of crack depth unevenness on the mode I stress intensity factor (SIF) distributions along the fronts of semi-elliptical surface cracks is studied. These three-dimensional radial cracks pertain to large uniform arrays of unequal-depth cracks emanating from the bore of a pressurized thick-walled cylinder. The analysis is based on the “two crack depth level model,” previously proposed, and is performed via the finite element (FE) method employing singular elements along the crack front. The distribution of $KIP$-the stress intensity factor due to pressurization, for numerous uneven array configurations bearing $n=n1+n2=8$ to 128 cracks, a wide range of crack depth to wall thickness ratios, $a1/t=0.01$ to 0.4, and various crack ellipticities, $a1/c1=0.3$ to 1.5, are evaluated for a cylinder of radii ratio $Ro/Ri=2.$ To increase the accuracy of the evaluated SIFs an existing improved version of the displacement extrapolation method is used. The results clearly indicate that unevenness, as reflected in $KIP$ distributions, depends on both the number of cracks in the array as well as on the cracks’ depths and ellipticities. The “interaction range” for the various configurations of uneven crack arrays is evaluated. The range of influence between adjacent cracks on the maximal SIF, $KPmax,$ is found to be dependent on the density of the array, as reflected in the inter-crack aspect-ratio, as well as on the cracks’ elipticity.

1.
Pu, S. L., 1984, “Stress Intensity Factors for a Circular Ring with Uniform Array of Radial Cracks of Unequal Depth,” ARLCB-TR-84021, US Army Armament Research & Development Center, Watervliet, NY.
2.
Pu, S. L., 1985, “Stress Intensity Factors at Radial Cracks of Unequal Depth in Partially Autofrettaged, Pressurized Cylinders,” ARLCB-TR-85018, US Army Armament Research & Development Center, Watervliet, NY.
3.
Pu, S. L., 1986, “Stress Intensity Factors for a Circular Ring with Uniform Array of Radial Cracks of Unequal Depth,” ASTM STP 905, pp. 559–572.
4.
Desjardins
,
J. L.
,
Burns
,
D. J.
,
Bell
,
R.
, and
Thompson
,
J. C.
,
1991
, “
Stress Intensity Factors for Unequal Longitudinal-Radial Cracks in Thick-Walled Cylinders
,”
ASME J. Pressure Vessel Technol.
,
113
, pp.
22
27
.
5.
Arone´
,
R.
, and
Perl
,
M.
,
1989
, “
Influence of Autofrettage on the Stress Intensity Factors for a Thick-Walled Cylinder with Radial Cracks of Unequal Length
,”
Int. J. Fract.
,
39
, pp.
R29–R34
R29–R34
.
6.
Perl
,
M.
,
Wu
,
K. H.
, and
Arone´
,
R.
,
1990
, “
Uniform Arrays of Unequal-Depth Cracks in Thick-Walled Cylindrical Pressure Vessels: Part I—Stress Intensity Factors Evaluation
,”
ASME J. Pressure Vessel Technol.
,
112
, pp.
340
345
.
7.
Perl
,
M.
, and
Alperowitz
,
D.
,
1997
, “
The Effect of Crack Length Unevenness on Stress Intensity Factors Due to Autofrettage in Thick-Walled Cylinders
,”
ASME J. Pressure Vessel Technol.
,
119
, pp.
274
278
.
8.
Perl
,
M.
,
Levy
,
C.
, and
Pierola
,
J.
,
1996
, “
Three Dimensional Interaction Effects in an Internally Multicracked Pressurized Thick-Walled Cylinder: Part I—Radial Crack Arrays
,”
ASME J. Pressure Vessel Technol.
,
118
, pp.
357
363
.
9.
Perl
,
M.
, and
Nachum
,
A.
,
2000
, “
3-D Stress Intensity Factors for Internal Cracks in an Over-Strained Cylindrical Pressure Vessel: Part I—The Effect of Autofrettage Level
,”
ASME J. Pressure Vessel Technol.
,
122
(
4
), pp.
421
426
.
10.
Perl
,
M.
, and
Nachum
,
A.
,
2001
, “
3-D Stress Intensity Factors for Internal Cracks in an Over-Strained Cylindrical Pressure Vessel: Part II—The Combined Effect of Pressure and Autofrettage
,”
ASME J. Pressure Vessel Technol.
,
123
(
1
), pp.
135
138
.
11.
Perl
,
M.
, and
Greenberg
,
Y.
,
1999
, “
Three Dimensional Analysis of Thermal Shock Effect on Inner Semi-Elliptical Surface Cracks in a Cylindrical Pressure Vessel
,”
Int. J. Fract.
,
99
(
3
), pp.
163
172
.
12.
ANSYS 6.1 Complete User’s Manual Set, 2002, ANSYS, Inc.
13.
Barsom
,
R. S.
,
1976
, “
On the Use of Isoparametric Finite Elements in Linear Fracture Mechanics
,”
Int. J. Numer. Methods Eng.
,
10
(
1
), pp.
25
37
.
14.
Banks-Sills
,
L.
, and
Sherman
,
D.
,
1986
, “
Comparison of Methods for Calculating Stress Intensity Factors With Quarter-Point Elements
,”
Int. J. Fract.
,
32
, pp.
127
140
.