The paper investigates the response of elbows under in-plane bending and pressure, through nonlinear finite element tools, supported by experimental results from real-scale tests. The finite element analysis is mainly based on a nonlinear three-node “tube element,” capable of describing elbow deformation in a rigorous manner, considering geometric and material nonlinearities. Furthermore, a nonlinear shell element from a general-purpose finite element program is employed in some special cases. Numerical results are compared with experimental data from steel elbow specimens. The comparison allows the investigation of important issues regarding deformation and ultimate capacity of elbows, with emphasis on relatively thin-walled elbows. The results demonstrate the effects of pressure and the influence of straight pipe segments. Finally, using the numerical tools, failure of elbows under bending moments is examined (cross-sectional flattening or local buckling), and reference to experimental observations is made.
Nonlinear Response and Failure of Steel Elbows Under In-Plane Bending and Pressure
Contributed by the Pressure Vessels and Piping Division for publication in the JOURNAL OF PRESSURE VESSEL TECHNOLOGY. Manuscript received by the PVP Division November 17, 2002; revision received June 4, 2003. Associate Editor: R. J. Scavuzzo.
- Views Icon Views
- Share Icon Share
- Cite Icon Cite
- Search Site
Karamanos, S. A., Giakoumatos, E., and Gresnigt, A. M. (November 4, 2003). "Nonlinear Response and Failure of Steel Elbows Under In-Plane Bending and Pressure ." ASME. J. Pressure Vessel Technol. November 2003; 125(4): 393–402. https://doi.org/10.1115/1.1613949
Download citation file:
- Ris (Zotero)
- Reference Manager