An experimental study of high-pressure waterjet peening on 7075-T6 aluminum alloy was conducted to investigate the effects of waterjet on high-cycle fatigue life and fatigue crack growth. Unnotched hourglass-shaped circular cross section test specimens were fatigue tested in completely reversed rotating bending to determine fatigue life behavior curves). Single-edge-notched flat tensile test specimens were tested in the tension-tension fatigue crack growth tests to determine fatigue crack propagation behavior versus Surface characteristics and fracture surfaces were evaluated by scanning electron microscopy (SEM). Results show that waterjet peening can increase high-cycle fatigue life, delay fatigue crack initiation, and decrease the rate of fatigue crack propagation.
Fatigue Performance of High-Pressure Waterjet-Peened Aluminum Alloy
Contributed by the Pressure Vessels and Piping Division and presented at the Pressure Vessels Piping Conference, Seattle, Washington, July 23–27, of THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS. Manuscript received by the PVP Division, January 14, 2001; revised manuscript received May 22, 2001. Editor: S. Y. Zamrik.
- Views Icon Views
- Share Icon Share
- Cite Icon Cite
- Search Site
Ramulu, M., Kunaporn , S., Jenkins, M., Hashish, M., and Hopkins, J. (May 22, 2001). "Fatigue Performance of High-Pressure Waterjet-Peened Aluminum Alloy ." ASME. J. Pressure Vessel Technol. February 2002; 124(1): 118–123. https://doi.org/10.1115/1.1398553
Download citation file:
- Ris (Zotero)
- Reference Manager