This part of the paper presents several examples to further demonstrate the hardening model proposed in the first part of the paper. Closed-form solutions are achieved for a thin-walled tube subjected to linear, rectangular, and circular loading paths, and the corresponding yield center loci and plastic strain trajectories are illustrated. The features of this model are further discussed.

1.
Batdorf, S. B., and Budiansky, B., 1949, “A Mathematical Theory of Plasticity Based on the Concept of Slip,” NACA TN, 1971.
2.
Benallal, A., and Marquis, D., 1987, “Constitutive Equations Describing Non-Proportional Effects in Cyclic Plasticity,” Constitutive Laws for Engineering Materials—Theory and Applications, Vol. I, eds., C. S. Desai et al., Elsevier, New York, NY, pp. 505–512.
3.
Chaboche, J. L., Dang-Van, K., and Cordier, G., 1979, “Modelization of the Strain Memory Effect on the Cyclic Hardening of 316 Stainless Steel,” Proceedings of the 5th International Conference on Structural Mechanics in Reactor Technology, Berlin, Germany.
4.
Dafalias
Y. F.
, and
Popov
E. P.
,
1975
, “
A Model of Nonlinearly Hardening Materials for Complex Loading
,”
Acta Mechanica
, Vol.
21
, pp.
173
192
.
5.
Drucker
D. C.
, and
Palgen
L.
,
1981
, “
On Stress-Strain Relations Suitable for Cyclic and Other Loading
,”
ASME Journal of Applied Mechanics
, Vol.
48
, pp.
479
485
.
6.
Eisenberg
M. A.
,
1976
, “
A Generalization of Plastic Flow Theory with Application to Cyclic Hardening and Softening Phenomena
,”
ASME Journal of Engineering Materials and Technology
, Vol.
98
, pp.
221
228
.
7.
German
I.
, and
Hodge
P. G.
,
1959
, “
A General Theory of Piecewise Linear Plasticity for Initially Anisotropic Materials
,”
Nadbithka Zeitschrift Archivum Mechaniki Strasowanej
, Vol.
11
, pp.
514
540
.
8.
Jiang
W.
, and
Wu
K. H.
,
1993
, “
Thin-Walled Tubes Subjected to Combined Internal Pressure and Axial Load
,”
AIAA Journal
, Vol.
31
, No.
2
, pp.
377
387
.
9.
Jiang
W.
,
1993
a, “
The Elastic-Plastic Response of Thin-Walled Tubes Under Combined Axial and Torsional Loads: I—Monotonic Loading
,”
ASME JOURNAL OF PRESSURE VESSEL TECHNOLOGY
, Vol.
115
, pp.
283
290
.
10.
Jiang
W.
,
1993
b, “
The Elastic-Plastic Response of Thin-Walled Tubes Under Combined Axial and Torsional Loads: II—Variable Loading
,”
ASME JOURNAL OF PRESSURE VESSEL TECHNOLOGY
, Vol.
115
, pp.
291
296
.
11.
Jiang
,
1994
a, “
Study of Two-Surface Plasticity Theory
,”
Journal of Engineering Mechanics
, ASCE, Vol.
120
, No.
10
, pp.
2179
2200
.
12.
Jiang
,
1994
b, “
New Kinematic Hardening Model
,”
Journal of Engineering Mechanics
, ASCE, Vol.
120
, No.
10
, pp.
2201
2222
.
13.
Jie
N.
, and
Xu
C.
,
1991
, “
On the Properties of Plastic Flow of Material under Nonproportional Cyclic Loading
,”
International Journal of Solids and Structures
, Vol.
28
, No.
4
, pp.
403
412
.
14.
Krieg
R. D.
,
1975
, “
A Practical Two Surface Plasticity Theory
,”
ASME Journal of Applied Mechanics
, Vol.
42
, pp.
641
646
.
15.
Lamba
H. S.
, and
Sidebottom
O. M.
,
1978
, “
Cyclic Plasticity for Nonproportional Paths: Part 1—Cyclic Hardening, Erasure of Memory and Susequent Strain Hardening Experiments
,”
ASME Journal of Engineering Materials and Technology
, Vol.
100
, pp.
96
103
.
16.
Lamba
H. S.
, and
Sidebottom
O. M.
,
1978
, “
Cyclic Plasticity for Nonproportional Paths: Part 2—Comparison and Predictions of Three-Incremental Plasticity Models
,”
ASME Journal of Engineering Materials and Technology
, Vol.
100
, pp.
104
111
.
17.
Masing, G., 1926, “Eigenspannungen und Verfestignung Beim Messing,” Proceedings of the Second Congress for Applied Mechanics, Zurich, Switzerland.
18.
McDowell
D. L.
,
1985
, “
A Two Surface Model for Transient Nonproportional Cyclic Plasticity: Part 1—Development of Appropriate Equations
,”
ASME Journal of Applied Mechanics
, Vol.
52
, pp.
298
302
.
19.
McDowell
D. L.
,
1985
, “
A Two Surface Model for Transient Nonproportional Cyclic Plasticity: Part 2—Comparison of Theory With Experiments
,”
ASME Journal of Applied Mechanics
, Vol.
52
, pp.
303
308
.
20.
Mroz
Z.
,
1967
, “
On the Description of Anisotropic Workhardening
,”
Journal of the Mechanics and Physics of Solids
, Vol.
15
, pp.
163
175
.
21.
Mroz
Z.
,
1967
, “
An Attempt to Describe the Behaviour of Metals under Cyclic Loads Using a More General Workhardening Model
,”
Acta Mechanica
, Vol.
7
, pp.
199
212
.
22.
Phillips
A.
, and
Wang
G. J.
,
1975
, “
An Analytical Study of an Experimentally Verified Hardening Law
,”
ASME Journal of Applied Mechanics
, Vol.
42
, pp.
375
378
.
23.
Phillips
A.
, and
Lee
C. W.
,
1979
, “
Yield Surface and Loading Surface. Experiments and Recommendation
,”
International Journal of Solids and Structures
, Vol.
15
, pp.
715
729
.
24.
Prager
W.
,
1955
, “
The Theory of Plasticity—A Survey of Recent Achievements
,”
Proceedings of the Institution of Mechanical Engineers
, London, U.K., Vol.
169
, pp.
41
57
.
25.
Tseng
N. T.
, and
Lee
G. C.
,
1983
, “
Simple Plasticity Model of Two-Surface Type
,”
Journal of Engineering Mechanics
, ASCE, Vol.
109
, No.
3
, pp.
795
810
.
26.
Ziegler
H.
,
1959
, “
A Modification of Prager’s Hardening Rule
,”
Quarterly of Applied Mathematics
, Vol.
17
, pp.
55
65
.
This content is only available via PDF.
You do not currently have access to this content.