Abstract
Robust approximate methods to estimate the inelastic energy release rate J, and the creep crack-growth parameter, C*, for cracked components are described in this paper. These methods use linear elastic finite element analysis in conjunction with the concepts of the generalized local stress strain (GLOSS) analysis and redistribution nodes (r-nodes), and are readily applicable to complex geometries and loadings. J-estimates obtained by the use of robust methods are found to be in good agreement with the results of elastic-plastic finite element analysis.
Issue Section:
Research Papers
1.
ANSYS User’s Manual for Revision 5.0, 1992 Swanson
Analysis Systems Inc., Houston, PA.
2.
Barsoum
R.
S.
1976
,
“On the Use of Isoparametric Finite Elements in Linear
Fracture Mechanics
,” International Journal for
Numerical Methods in Engineering
, Vol. 10
, pp.
25
–37
.3.
Barsoum
R.
S.
1977
,
“Triangular Quarter-Point Elements as Elastic and
Perfectly-Plastic Crack Tip Elements
,” International
Journal for Numerical Methods in Engineering
, Vol.
11
, pp.
85
–98
.4.
Bucci, R. J., Paris, P. C., Landes, J. D., and Rice,
J. R., 1972, “J Integral Estimation Procedures,” Fracture Toughness,
Proceedings of the 1971 National Symposium on Fracture Mechanics,
Part II, ASTM STP 514, pp. 40–69.
5.
Ehlers, R., and Riedel, H., 1981, Advances in
Fracture Research, ICF 5, Vol. 2, eds., D. Franc¸ois et al.,
Pergamon Press, pp. 691–698.
6.
Marriott, D. L., 1992, “Beyond Finite Element
Analysis, Professional Development,” Session 3, 11th Symposium on
Engineering Applications of Mechanics, University of Regina,
Regina, Saskatchewan, Canada.
7.
Miller
A.
G.
1988
,
“Review of Limit Loads of Structures Containing
Defects
,” International Journal of Pressure Vessel
and Piping
, Vol. 32
, Nos. 1–4
, pp.
197
–327
.8.
Nikbin, K. M., Smith, D. J., and Webster, G. A.,
1983, “Influence of Creep Ductility and State of Stress on Creep Crack Growth,”
Advances in Life Prediction Methods, ASME International
Conference, Albany, NY.
9.
Rice
J.
R.
1968
,
“A Path Independent Integral and the Approximate Analysis of
Strain Concentration by Notches and Cracks
,” ASME
Journal of Applied Mechanics
, Vol. 35
, pp.
379
–386
.10.
Rice
J.
R.
Rosengren
G.
F.
1968
,
“Plane Strain Deformation Near a Crack Tip in a Power-Law
Hardening Material
,” Journal of the Mechanics and
Physics of Solids
, Vol. 16
, pp.
1
–12
.11.
Seshadri
R.
1991
, “The Generalized Local Stress Strain
(GLOSS) Analysis—Theory and Applications
,” ASME
JOURNAL OF PRESSURE VESSEL TECHNOLOGY
, 25th Anniversary Issue, Vol.
113
, pp.
219
–227
.12.
Seshadri, R., and Fernando, C. P. D., 1992, “Limit
Loads of Mechanical Components and Structures Using the GLOSS R-Node Method,”
ASME JOURNAL OF PRESSURE VESSEL TECHNOLOGY, Vol. 114.
13.
Solecki, J. S., 1989, Fracture
Mechanics, ANSYS Revision 4.4 Tutorial, Swanson Analysis Systems,
Inc., Houston, PA.
This content is only available via PDF.
Copyright © 1995
by The American Society of Mechanical Engineers
You do not currently have access to this content.
