Improving the reliability of the piping systems can be achieved by eliminating the mechanical snubber and by reducing the response of the piping. In the seismic design of piping system, damping is one of the important parameters to reduce the seismic response. It is reported that the energy dissipation at piping supports contributes to increasing the damping ratio of piping system. Visco-elastic damper (VED) and elasto-plastic damper (EPD) were developed as more reliable, high-damping piping supports. The dynamic characteristics of these dampers were studied by the component test and the full-scale piping model test. Damping effect of VED is independent of the piping response and VED can be modeled as a complex spring in the dynamic analysis. On the other hand, damping ratio of piping system supported by EPD increases with the piping response level. So, these dampers are helpful to increase the damping ratio and to reduce the dynamic response of piping system.
Skip Nav Destination
Article navigation
February 1990
Research Papers
Response Characteristics of Piping System Supported by Visco-Elastic and Elasto-Plastic Dampers
T. Chiba,
T. Chiba
Nuclear Power Division, Ishikawajima-Harima Heavy, Industries Co., Ltd., Shin-Nakahara-cho Isogo-ku Yokohama, Japan
Search for other works by this author on:
H. Kobayashi
H. Kobayashi
Nuclear Power Division, Ishikawajima-Harima Heavy, Industries Co., Ltd., Shin-Nakahara-cho Isogo-ku Yokohama, Japan
Search for other works by this author on:
T. Chiba
Nuclear Power Division, Ishikawajima-Harima Heavy, Industries Co., Ltd., Shin-Nakahara-cho Isogo-ku Yokohama, Japan
H. Kobayashi
Nuclear Power Division, Ishikawajima-Harima Heavy, Industries Co., Ltd., Shin-Nakahara-cho Isogo-ku Yokohama, Japan
J. Pressure Vessel Technol. Feb 1990, 112(1): 34-38 (5 pages)
Published Online: February 1, 1990
Article history
Received:
September 18, 1987
Revised:
April 7, 1989
Online:
June 17, 2008
Citation
Chiba, T., and Kobayashi, H. (February 1, 1990). "Response Characteristics of Piping System Supported by Visco-Elastic and Elasto-Plastic Dampers." ASME. J. Pressure Vessel Technol. February 1990; 112(1): 34–38. https://doi.org/10.1115/1.2928583
Download citation file:
Get Email Alerts
Influence of water cover on the blast resistance of circular plates
J. Pressure Vessel Technol
Dynamic response and damage analysis of a large steel tank impacted by an explosive fragment
J. Pressure Vessel Technol
Surface Strain Measurement for Non-Intrusive Internal Pressure Evaluation of A Cannon
J. Pressure Vessel Technol
Related Articles
Passive Control of Seismic Response of Piping Systems
J. Pressure Vessel Technol (August,2006)
Uniqueness of Damping and Stiffness Distributions in the Identification of Soil and Structural Systems
J. Appl. Mech (March,1978)
Dynamic Response Studies of Piping-Support Systems
J. Pressure Vessel Technol (February,1990)
Development and Validation of Finite Element Structure-Tuned Liquid Damper System Models
J. Dyn. Sys., Meas., Control (November,2015)
Related Chapters
Dynamic Behavior of Pumping Systems
Pipeline Pumping and Compression Systems: A Practical Approach
Interface with Rotating Equipment
Pipe Stress Engineering
Fundamentals of Structural Dynamics
Flow Induced Vibration of Power and Process Plant Components: A Practical Workbook