Skip Nav Destination
Just Accepted Manuscript
Research-Article January 18, 2025
Constraint effect and crack-tip plastic zone of the pipe with internal inclined surface cracks under external pressure
J. Pressure Vessel Technol.
doi: https://doi.org/10.1115/1.4067676
Technical Briefs January 18, 2025
Technical Basis for Revising the Fatigue Crack Growth Rates for Ferritic Steels in the ASME Code Section XI
J. Pressure Vessel Technol.
doi: https://doi.org/10.1115/1.4067679
Research-Article January 18, 2025
Research on the accelerated life test method for gaskets and the verification of the accuracy of the life prediction
J. Pressure Vessel Technol.
doi: https://doi.org/10.1115/1.4067678
Discussions January 18, 2025
Evaluation Of The Structural Suitability Of Lifting Trunnions In Large Pressure Vessels
J. Pressure Vessel Technol.
doi: https://doi.org/10.1115/1.4067675
Research-Article January 18, 2025
Optimization of High-Vapor Pressure Condensate Pipeline Commissioning Schemes in Large Uplift Environments
J. Pressure Vessel Technol.
doi: https://doi.org/10.1115/1.4067677
Research-Article January 10, 2025
Development of Local Ductile Failure Assessment Method And Its Application To Four Alloys Part II : Incorporation of The Effect of Lode Angle
J. Pressure Vessel Technol.
doi: https://doi.org/10.1115/1.4067564
Research-Article January 10, 2025
Fracture analysis of sharp notches under Mode III loading - A local approach
J. Pressure Vessel Technol.
doi: https://doi.org/10.1115/1.4067592
Research-Article January 10, 2025
Determination and Sensitivity Analysis of Target Flaw Sizes for Performance Demonstration of Cast Austenitic Stainless Steel Pipe by Probabilistic Fracture Mechanics
J. Pressure Vessel Technol.
doi: https://doi.org/10.1115/1.4067591
Research-Article January 10, 2025
Development of Local Ductile Failure Assessment Method and Its Application to Four Alloys Part I : Stress-Strain Relation And Analysis Without The Effect of Lode Angle
J. Pressure Vessel Technol.
doi: https://doi.org/10.1115/1.4067590
Technical Briefs January 10, 2025
Failure Analysis of a Waste Heat Boiler of a Sulfurburning Sulfuric Acid Plant
J. Pressure Vessel Technol.
doi: https://doi.org/10.1115/1.4067620
Research-Article December 24, 2024
Application of an Equivalent Temperature Field for Emulating Thermal Autofrettage-Induced Residual Stresses in Thick-walled Cylinder
J. Pressure Vessel Technol.
doi: https://doi.org/10.1115/1.4067532
Research-Article December 21, 2024
Development of Scaling Parameter SR for Negative Stress Ratios R Based on Trend in Experimental Data for Fatigue Crack Growth Rates of Austenitic Stainless Steels for ASME Code Section XI
J. Pressure Vessel Technol.
doi: https://doi.org/10.1115/1.4067484
Research-Article December 17, 2024
Nonlinear pressure evolution in wellbore during the tubing conveyed perforation process
J. Pressure Vessel Technol.
doi: https://doi.org/10.1115/1.4067456
Research-Article December 13, 2024
On the possibility of extending the crack length criterion in the master curve methodology
J. Pressure Vessel Technol.
doi: https://doi.org/10.1115/1.4067434
Research-Article October 23, 2024
Dynamic Behavior of Rectangular Tanks with Limited Freeboard Under Seismic Loads: Experimental, Analytical and Machine Learning Investigations
J. Pressure Vessel Technol.
doi: https://doi.org/10.1115/1.4066967
Errata March 26, 2020
Erratum: “A Reaffirmation of Fracture Toughness Requirements for ASME Section VIII Vessels for Service Temperatures Colder Than 77 K” [ASME. J. Pressure Vessel Technol., 2017, 139(4), p. 041407. https://doi.org/10.1115/1.4036138]
J. Pressure Vessel Technol.
doi: https://doi.org/10.1115/1.4046738
Technical Briefs November 1, 2019
Analysis of Residual Stresses On the Expanding Transition Zone of Steam Generator Tubes of Apr1400
J. Pressure Vessel Technol.
doi: https://doi.org/10.1115/1.4045392
Technology Review July 3, 2017
Fitness for Service of Layered Multiwalled Design Vessels
J. Pressure Vessel Technol.
doi: https://doi.org/10.1115/1.4037197
Email alerts
RSS Feeds
Optimization of High-Vapor Pressure Condensate Pipeline Commissioning Schemes in Large Uplift Environments
J. Pressure Vessel Technol
Evaluation Of The Structural Suitability Of Lifting Trunnions In Large Pressure Vessels
J. Pressure Vessel Technol
Technical Basis for Revising the Fatigue Crack Growth Rates for Ferritic Steels in the ASME Code Section XI
J. Pressure Vessel Technol
