Skip Nav Destination
Volumes
2023
EISSN 2770-3495
In this Volume
Editorial
A Review of Biosensors and Their Applications
ASME Open J. Engineering. January 2023, 2: 020201.
doi: https://doi.org/10.1115/1.4063500
Topics:
Biosensors
,
Sensors
Research Papers
Manufacturing Strategies to Mitigate Deformation Twinning in Magnesium
Shelby Rustom, YubRaj Paudel, Shiraz Mujahid, Matthew Cagle, Prathmesh Anantwar, Kavan Hazeli, Robert Moser, Bhasker Paliwal, Hongjoo Rhee, Haitham El Kadiri, Christopher D. Barrett
ASME Open J. Engineering. January 2023, 2: 021001.
doi: https://doi.org/10.1115/1.4056553
Topics:
Deformation
,
Magnesium (Metal)
,
Plating
,
Twinning
,
Nucleation (Physics)
,
Stress
,
Magnesium alloys
,
Manufacturing
,
Ductility
The Importance of Transparency in Regulation
ASME Open J. Engineering. January 2023, 2: 021002.
doi: https://doi.org/10.1115/1.4056536
Topics:
Transparency
,
Safety
Effects of Panel Misalignment in a Deployable Origami-Based Optical Array
ASME Open J. Engineering. January 2023, 2: 021003.
doi: https://doi.org/10.1115/1.4056475
Topics:
Sensors
,
Simulation
,
Telescopes
,
Design
Explosion Differentiation Using Light Emissions—Nuclear Reactor, Steam, Water Hammer, Hydrogen, Piper Alpha, and Hydro-Volcanic Explosions
ASME Open J. Engineering. January 2023, 2: 021004.
doi: https://doi.org/10.1115/1.4056472
Topics:
Explosions
,
Water hammer
,
Hydrogen
,
Pipes
Electroencephalogram Experimentation to Understand Creativity of Mechanical Engineering Students
ASME Open J. Engineering. January 2023, 2: 021005.
doi: https://doi.org/10.1115/1.4056473
Topics:
Creativity
,
Electroencephalography
,
Electrodes
,
Machine learning
,
Signals
Pressure Signal-Based Analysis of Anomalies in Switching Behavior of a Two-Way Directional Control Valve
ASME Open J. Engineering. January 2023, 2: 021006.
doi: https://doi.org/10.1115/1.4056474
Topics:
Dimensions
,
Fractals
,
Pressure
,
Signals
,
Valves
,
Artificial neural networks
A Comparison of Industrial-Scale Radiometer Heat Flux Measurements Between Pulverized-Coal and Coal/Biomass Co-Firing Combustion
ASME Open J. Engineering. January 2023, 2: 021007.
doi: https://doi.org/10.1115/1.4056537
Topics:
Biomass
,
Boilers
,
Coal
,
Co-firing
,
Flames
,
Fuels
,
Heat flux
,
Radiation (Physics)
,
Power stations
,
Calibration
Performance Assessment of Chemical Kinetics Neural Ordinary Differential Equations in Pairwise Mixing Stirred Reactor
ASME Open J. Engineering. January 2023, 2: 021008.
doi: https://doi.org/10.1115/1.4056476
Topics:
Chemical kinetics
,
Chemistry
,
Combustion
,
Differential equations
,
Errors
,
Particulate matter
,
Simulation
,
Temperature
,
Stiffness
,
Scalars
Water Relief Through Safety or Relief Valves is not Just a Leak
ASME Open J. Engineering. January 2023, 2: 021009.
doi: https://doi.org/10.1115/1.4056619
Topics:
Accidents
,
Emergency core cooling systems
,
Flow (Dynamics)
,
Leakage
,
Platform supply vessels
,
Safety
,
Water
,
Relief valves
,
Pressure
A 3-D Printed Optically Clear Rigid Diseased Carotid Bifurcation Arterial Mock Vessel Model for Particle Image Velocimetry Analysis in Pulsatile Flow
ASME Open J. Engineering. January 2023, 2: 021010.
doi: https://doi.org/10.1115/1.4056639
Experimental and Numerical Investigation of Lauric Acid Melting at Suboptimal Inclines
ASME Open J. Engineering. January 2023, 2: 021011.
doi: https://doi.org/10.1115/1.4056348
Topics:
Density
,
Melting
,
Temperature
,
Containers
,
Computer simulation
,
Enthalpy
Part Change Management: A Case Study on Automotive Engineering and Production; Domestic and International Perspectives
ASME Open J. Engineering. January 2023, 2: 021012.
doi: https://doi.org/10.1115/1.4056813
Topics:
Change management
,
Manufacturing
,
Design
Offshore Logistics: Scenario Planning and Installation Modeling of Floating Offshore Wind Projects
ASME Open J. Engineering. January 2023, 2: 021013.
doi: https://doi.org/10.1115/1.4056882
Topics:
Ocean engineering
,
Wind
,
Vessels
,
Logistics
,
Wind farms
,
Manufacturing
,
Modeling
Research on Electromagnetic Interference Protection of Nuclear Power Unit Equipment Under the Application of New Wireless Technology in Smart Nuclear Power
ASME Open J. Engineering. January 2023, 2: 021014.
doi: https://doi.org/10.1115/1.4056814
Determination of Microcystis aeruginosa Concentration Using Two Discrete Wavelengths
ASME Open J. Engineering. January 2023, 2: 021015.
doi: https://doi.org/10.1115/1.4056964
Topics:
Absorption
,
Design
,
Wavelength
,
Teams
,
Sensors
,
Calibration
Drag Reduction for Flow Past Circular Cylinder Using Static Extended Trailing Edge
Ayush Boral, Souvik Dutta, Anwesha Das, Ankit Kumar, Nilotpala Bej, Pooja Chaubdar, Biranchi Narayana Das, Atal Bihari Harichandan
ASME Open J. Engineering. January 2023, 2: 021016.
doi: https://doi.org/10.1115/1.4057009
Real-Time Hybrid Testing of a Floating Offshore Wind Turbine Using a Surrogate-Based Aerodynamic Emulator
Edward J. Ransley, Scott A. Brown, Emma C. Edwards, Tom Tosdevin, Kieran Monk, Alastair M. Reynolds, Deborah Greaves, Martyn R. Hann
ASME Open J. Engineering. January 2023, 2: 021017.
doi: https://doi.org/10.1115/1.4056963
Topics:
Floating wind turbines
,
Hardware
,
Testing
,
Thrust
,
Waves
,
Wind
,
Stress
,
Feedback
,
Simulation
,
Shorelines
Laser Forming of Compliant Mechanisms
ASME Open J. Engineering. January 2023, 2: 021018.
doi: https://doi.org/10.1115/1.4057048
Topics:
Compliant mechanisms
,
Lasers
,
Design
,
Manufacturing
,
Metals
Validation Study of a Computer-Aided Design Augmentation Tool for Cost Estimation
ASME Open J. Engineering. January 2023, 2: 021019.
doi: https://doi.org/10.1115/1.4062110
Topics:
Computer-aided design
,
Design
,
Manufacturing
,
Modeling
,
Performance
,
Design for Manufacturing
,
Feedback
Systematic Assessment of the Two-Step, One-Way Coupled Method for Computational Fluid Dynamics
ASME Open J. Engineering. January 2023, 2: 021020.
doi: https://doi.org/10.1115/1.4062111
Topics:
Boundary-value problems
,
Computational fluid dynamics
,
Errors
,
Flow (Dynamics)
,
Geometry
,
Simulation
,
Design
Medical Device Hybrid Manufacturing: Translating the Coordinate System From Metal Additive Manufacturing to Subtractive Post-Processing
Justin T. Suriano, Angelantonio Tafuni, Lewis Mullen, Joseph Racanelli, Robert Tarantino, Samuel C. Lieber
ASME Open J. Engineering. January 2023, 2: 021021.
doi: https://doi.org/10.1115/1.4062187
Topics:
Additive manufacturing
,
Design
,
Electrical discharge machining
,
Manufacturing
,
Medical devices
,
Metals
,
Wire
,
Machining
,
Flanges
,
Finishes
A Data-Driven Framework for Computationally Efficient Integration of Chemical Kinetics Using Neural Ordinary Differential Equations
ASME Open J. Engineering. January 2023, 2: 021022.
doi: https://doi.org/10.1115/1.4062105
Topics:
Artificial neural networks
,
Chemical kinetics
,
Differential equations
,
Errors
,
Hydrogen
,
Pressure
,
Temperature
,
Combustion
,
Simulation
,
Stiffness
Insight Into Recompression Brayton Cycle
ASME Open J. Engineering. January 2023, 2: 021023.
doi: https://doi.org/10.1115/1.4062258
Topics:
Brayton cycle
,
Cycles
,
Entropy
,
Pressure
,
Temperature
,
Turbines
,
Exergy
,
Thermodynamics
,
Low temperature
Investigation of the Interfacial Adhesion Strength of Parts Additively Manufactured on Fabrics
ASME Open J. Engineering. January 2023, 2: 021024.
doi: https://doi.org/10.1115/1.4062281
Topics:
Additive manufacturing
,
Adhesion
,
Temperature
,
Testing
,
Textiles
Modeling and Design of Hinged Tile-Based Curling Air Surface for Morphing Windshield Cowling
ASME Open J. Engineering. January 2023, 2: 021025.
doi: https://doi.org/10.1115/1.4062220
A Comparative Study of the Conventional Poppet Valve and the Proposed Novel Independent Rotary Valve Configurations for Improving Efficiency of the Internal Combustion Engine
ASME Open J. Engineering. January 2023, 2: 021026.
doi: https://doi.org/10.1115/1.4062280
Low-Cost and Rapid Shaping of Nitinol for Medical Device Prototyping
Mighten C. Yip, Seyedhamidreza Alaie, Eva A. Romito, Tejas Doshi, Amir Ali Amiri Moghadam, Bobak Mosadegh, Simon Dunham
ASME Open J. Engineering. January 2023, 2: 021027.
doi: https://doi.org/10.1115/1.4062282
Topics:
Heat
,
Nickel titanium alloys
,
Wire
,
Stents
,
Ceramics
,
Additive manufacturing
,
Medical devices
,
Design
,
Rapid prototyping
,
Manufacturing
Method to Establish Sound and Acceleration Levels of High Pressure Reducing Valves
ASME Open J. Engineering. January 2023, 2: 021028.
doi: https://doi.org/10.1115/1.4062346
Topics:
High pressure (Physics)
,
Pipes
,
Valves
,
Vibration
,
Sound pressure
Multi-Objective Optimization and Tradespace Analysis of a Mechanical Clock Movement Design
ASME Open J. Engineering. January 2023, 2: 021029.
doi: https://doi.org/10.1115/1.4062410
Topics:
Clocks
,
Design
,
Optimization
,
Pendulums
,
Q-factor
,
Genetic algorithms
Techno-Economic Investigation of Geothermal Development in Sedimentary Basins
ASME Open J. Engineering. January 2023, 2: 021030.
doi: https://doi.org/10.1115/1.4062412
Topics:
Drilling
,
Economics
,
Geothermal engineering
,
Geothermal power
,
Temperature
,
Wells
Comparison of Operation and Maintenance of Floating 14 MW Turbines and Twin 10 MW Turbines
ASME Open J. Engineering. January 2023, 2: 021031.
doi: https://doi.org/10.1115/1.4062413
Topics:
Maintenance
,
Turbines
,
Vessels
,
Simulation
Mechanical Characterization of Porcine Tricuspid Valve Anterior Leaflets Over Time: Applications to Ex Vivo Studies
ASME Open J. Engineering. January 2023, 2: 021032.
doi: https://doi.org/10.1115/1.4062477
Topics:
Biological tissues
,
Biomechanics
,
Mechanical testing
,
Stress
,
Valves
,
Physiology
,
Stiffness
Ammonia as an Aircraft Fuel: A Critical Assessment From Airport to Wake
ASME Open J. Engineering. January 2023, 2: 021033.
doi: https://doi.org/10.1115/1.4062626
Topics:
Aircraft
,
Aviation
,
Emissions
,
Engines
,
Fuels
,
Hydrogen
,
Sustainable aviation fuels
,
Temperature
,
Turbines
,
Heat exchangers
Optimal Composition of Palm Oil Biomass to Minimize Biomass Power Plants’ Greenhouse Gases Emission
ASME Open J. Engineering. January 2023, 2: 021034.
doi: https://doi.org/10.1115/1.4062627
Topics:
Biomass
,
Combustion
,
Emissions
,
Fibers
,
Fuels
,
Shells
,
Power stations
,
Boilers
Nonlinear Thermal-Magneto-Mechanical Vibration Analysis of Single-Walled Embedded Branched Carbon Nanotubes Conveying Nanofluid
ASME Open J. Engineering. January 2023, 2: 021035.
doi: https://doi.org/10.1115/1.4062695
Effects of Incremental Changes to Frame Mass on Manual Wheelchair Propulsion Cost
ASME Open J. Engineering. January 2023, 2: 021036.
doi: https://doi.org/10.1115/1.4062696
Topics:
Propulsion
,
Wheelchairs
,
Wheels
,
Rolling friction
,
Weight (Mass)
,
Shorelines
Failure Analysis of Once-Through Steam Generator (OTSG) Tube
ASME Open J. Engineering. January 2023, 2: 021037.
doi: https://doi.org/10.1115/1.4062769
Topics:
Alloys
,
Boilers
,
Cogeneration plants
,
Failure
,
Failure analysis
,
Feedwater
,
Fracture (Materials)
,
Leakage
,
Pressure
,
Steam
Prediction of Laminar Burning Speed of Propane/Hydrogen/Air Mixtures Using Power-Law Correlation and Two Machine Learning Models
ASME Open J. Engineering. January 2023, 2: 021038.
doi: https://doi.org/10.1115/1.4062745
Topics:
Artificial neural networks
,
Combustion
,
Hydrogen
,
Pressure
,
Temperature
,
Support vector machines
,
Machine learning
Swirl Brake Design for Improved Rotordynamic Vibration Stability Based on Computational Fluid Dynamics System Level Modeling
ASME Open J. Engineering. January 2023, 2: 021039.
doi: https://doi.org/10.1115/1.4062934
Topics:
Brakes
,
Compressors
,
Computational fluid dynamics
,
Deformation
,
Design
,
Impellers
,
Pressure
,
Stiffness
,
Transients (Dynamics)
,
Flow (Dynamics)
Temperature-Dependent Classification of Geopolymers Derived From Granite Designed for Well Cementing Applications
ASME Open J. Engineering. January 2023, 2: 021040.
doi: https://doi.org/10.1115/1.4063027
Topics:
Compressive strength
,
Design
,
Rheology
,
Temperature
,
Workability
,
X-ray diffraction
,
Low temperature
,
Cements (Adhesives)
,
Construction
The Behavior of Vertical Axis Water Turbine With Flexible Blades: Self-Start, Ventilation, and Cavitation
ASME Open J. Engineering. January 2023, 2: 021041.
doi: https://doi.org/10.1115/1.4063084
Topics:
Blades
,
Cavitation
,
Turbines
,
Ventilation
,
Water
,
Flow (Dynamics)
,
Hydraulic turbines
Protective Biology and Engineering
ASME Open J. Engineering. January 2023, 2: 021042.
doi: https://doi.org/10.1115/1.4063086
Topics:
Biology
,
Wounds
,
Liver
,
Diseases
,
Engineering disciplines
,
Optimization
Comment on the Paper “Duel Solutions in Hiemenz Flow of an Electro-Conductive Viscous Nanofluid Containing Elliptic Single-/Multi-Wall Carbon Nanotubes With Magnetic Induction Effects” (Ferdows, M., Tahia, T., Bég, O. A., and Bég, T. A., 2022, ASME Open J. Eng., 1, p. 011040)
ASME Open J. Engineering. January 2023, 2: 021043.
doi: https://doi.org/10.1115/1.4063085
Cyclic Combustion Variability of Dimethyl-Ether-Fueled Agricultural Tractor Engine
Avinash Kumar Agarwal, Hardikk Valera, Vikram Kumar, Nalini Kanta Mukherjee, Shanti Mehra, Devendra Nene
ASME Open J. Engineering. January 2023, 2: 021044.
doi: https://doi.org/10.1115/1.4063201
Topics:
Combustion
,
Cycles
,
Diesel
,
Engines
,
Fuels
,
Stress
,
Pressure
,
Cylinders
,
Ethers (Class of compounds)
Macroscopic and Microscopic Spray Characteristics of Dimethyl Ether in a Constant Volume Spray Chamber Using a Mechanical Fuel Injection System for Automotive Applications
Avinash Kumar Agarwal, Vikram Kumar, Shanti Mehra, Nalini Kanta Mukherjee, Hardikk Valera, Devendra Nene
ASME Open J. Engineering. January 2023, 2: 021045.
doi: https://doi.org/10.1115/1.4063202
Benchtop Characterization of Wearable Respiratory Monitors for Assessing Feasibility of Measuring Lung Volume
ASME Open J. Engineering. January 2023, 2: 021046.
doi: https://doi.org/10.1115/1.4063340
Comprehensive Performance Analysis and Correlation Fitting of R744 and Its Mixture Used in Refrigeration and Heat Pump Systems
ASME Open J. Engineering. January 2023, 2: 021047.
doi: https://doi.org/10.1115/1.4063341
Topics:
Evaporation
,
Heat pumps
,
Pressure
,
Refrigerants
,
Refrigeration
,
Simulation
,
Temperature
,
Fittings
,
Heating
,
High pressure (Physics)
Comparison of Numerical Methods That Predict Wellbore Cement Sheath Integrity
ASME Open J. Engineering. January 2023, 2: 021048.
doi: https://doi.org/10.1115/1.4063342
Topics:
Cements (Adhesives)
,
Failure
,
Finite element analysis
,
Fracture (Materials)
,
Fracture (Process)
,
Stress
,
Rocks
,
Numerical analysis
,
Wells
Sustainability in Mechanical Engineering Undergraduate Courses at 100 Universities
ASME Open J. Engineering. January 2023, 2: 021049.
doi: https://doi.org/10.1115/1.4063387
Topics:
Sustainability
,
Undergraduate students
,
Mechanical engineering
,
Economics
Combustion and Performance Evaluation of Methanol (M15)-Fueled BS-VI Compliant Light-Duty Spark-Ignition Engine
ASME Open J. Engineering. January 2023, 2: 021050.
doi: https://doi.org/10.1115/1.4063343
Topics:
Combustion
,
Engines
,
Fuels
,
Methanol
,
Pressure
,
Spark-ignition engine
,
Temperature
,
Stress
,
Cylinders
,
Gasoline
A Screw Approach to Vibration Analysis of Beam Structures With Nonstandard Conditions
ASME Open J. Engineering. January 2023, 2: 021051.
doi: https://doi.org/10.1115/1.4063461
Topics:
Boundary-value problems
,
Mode shapes
,
Robots
,
Screws
,
Stiffness
,
Vibration
Computation of Stagnation Point Convection Flow of Carbon Nanotube Nanofluids From a Stretching Sheet With Melting: Dual Solutions
ASME Open J. Engineering. January 2023, 2: 021052.
doi: https://doi.org/10.1115/1.4063645
Electrostatic Charge on Smartphone Surfaces
John Voccio, Valeria Vivas Merino, Mansour Zenouzi, Andrew Seredinski, William Burgess, Nicholas Daly
ASME Open J. Engineering. January 2023, 2: 021053.
doi: https://doi.org/10.1115/1.4063982
Topics:
Aerosols
,
Density
,
Dust
,
Glass
,
Mobile phones
,
Particulate matter
,
Laminates
,
Hydrogels
Texture-Dependent Thermal Properties of Sandstone Rocks Examined by Scanning Electron Microscopy for Thermal Energy Storage Applications
ASME Open J. Engineering. January 2023, 2: 021054.
doi: https://doi.org/10.1115/1.4064030
Technical Brief
Exploring Machine Learning and Machine Vision in Femtosecond Laser Machining
ASME Open J. Engineering. January 2023, 2: 024501.
doi: https://doi.org/10.1115/1.4063646
Topics:
Lasers
,
Machine learning
,
Machinery
,
Machining
,
Multilayer perceptron
,
Errors
Email alerts
RSS Feeds
Thermodynamic and Exergoeconomic Assessment of Environmentally-Benign Zeotropic Mixtures in Organic Rankine Cycle for Sustainable Power Generation
ASME Open J. Engineering (January 2024)
Model Parameter Extraction From Contact Geometry and Compliance in Tire–Soil Interaction
ASME Open J. Engineering (January 2024)
Strain Analysis of Vacuum Interrupter Bellows
ASME Open J. Engineering (January 2024)
Expansion and Strength Evolution Mechanism of Granite-Based Geopolymer Based on the Reactivity of Calcium Expansive Agents
ASME Open J. Engineering (January 2024)
Design and Integration of a Flapping Wing Apparatus
ASME Open J. Engineering (January 2024)