This paper presents a multiphysics approach for characterizing flow-induced vibrations (FIVs) in a subsea jumper subject to internal production flow, downstream slug, and ocean current. In the present study, the physical properties of production fluids and associated slugging behavior were characterized by pvtsim and olga programs under real subsea condition. Outcomes of the flow assurance studies were then taken as inputs of a full-scale two-way fluid–structure interaction (FSI) analysis to quantify the vibration response. To prevent onset of resonant risk, a detailed modal analysis has also be carried out to determine the modal shapes and natural frequencies. Such a multiphysics approach actually integrated the best practices currently available in flow assurance (olga and pvtsim), computational fluid dynamics (CFD), finite element analysis (FEA), and modal analysis, and hence provided a comprehensive solution to the FSI involved in a subsea jumper. The corresponding results indicate that both the internal production flow, downstream slugs, and the ocean current would induce vibration response in the subsea jumper. Compared to the vortex-induced vibration (VIV) due to the ocean current and the FIV due to the internal production flow, pressure fluctuation due to the downstream slug plays a dominant role in generating excessive vibration response and potential fatigue failure in the subsea jumper. Although the present study was mainly focused on the subsea jumper, the same approach can be applied to other subsea components, like subsea flowline, subsea riser, and other subsea production equipment.

References

References
1.
Sumer
,
B. M.
, and
Fredsøe
,
J.
,
2006
,
Hydrodynamics Around Cylindrical Structures
,
World Scientific
,
Singapore
, Chap. 2.
2.
Swindell
,
R.
,
2011
, “
Hidden Integrity Threat Looms in Subsea Pipework Vibrations
,”
Offshore
,
71
(
9
), pp.
78
81
.
3.
API RP 1111
,
2011
,
Recommended Practice for the Design, Construction, Operation, and Maintenance of Offshore Hydrocarbon Pipelines (Limit State Design)
,
American Petroleum Institute
,
Washington, DC
, pp.
11
12
.
4.
Taniguxhi
,
T.
, and
Kawano
,
K.
,
2005
, “
Effects of Current Induced Static Response on Total Response of Offshore Structures Subjected to Wave and Current
,”
15th International Offshore and Polar Engineering Conference
,
Seoul, Korea
, pp.
19
24
.
5.
Jia
,
D.
,
2012
, “
Slug Induced Vibration in Pipeline Span, Jumper, and Riser
,”
Offshore Technology Conference
,
Houston, TX
, Paper No. OTC-22935.
6.
Bruschi
,
R.
,
Bruesti
,
G.
,
Castoldi
,
A.
, and
Migliavacca
,
E.
,
1982
, “
Vortex Shedding Oscillations for Submarine Pipelines Comparison Between Full-Scale Experiments and Analytical Models
,”
Offshore Technology Conference
,
Houston, TX
, Paper No. OTC-4232.
7.
Chaudhury
,
G.
,
2001
, “
Vortex-Induced Vibration and Design of Pipelines in Deep-Water
,”
Offshore Technology Conference
,
Houston, TX
, Paper No. OTC-13018.
8.
Frank
,
W. R.
,
Tognarelli
,
M. A.
,
Slocum
,
S. T.
,
Campbell
,
R. B.
, and
Balasubramanian
,
S.
,
2004
, “
Flow-Induced Vibration of a Long Flexible, Straked Cylinder in Uniform and Linearly Sheared Currents
,”
Offshore Technology Conference
,
Houston, TX
, Paper No. OTC-16340.
9.
ASME B31.8
,
2003
,
Gas Transmission and Distribution Piping Systems, The America Society of Mechanical Engineers
,
New York
.
10.
API Bulletin 2INT-MET
,
2007
, “
Interim Guidance on Hurricane Conditions in the Gulf of Mexico
,”
Upstream Segment
,
American Petroleum Institute
,
Washington, DC
.
11.
ISO 19901-1
,
2005
,
Petroleum and Natural Gas Industries Specific Requirements for Offshore Structures-Part 1: Met Ocean Design and Operating Considerations
,
1st ed.
,
International Standard Organization
,
Geneva, Switzerland
.
12.
Sharqawy
,
M. H.
,
Lienhard
,
J. H.
, and
Zubair
,
S. M.
,
2010
, “
The Thermophysical Properties of Seawater: A Review of Existing Correlations and Data
,”
Desalin. Water Treat.
,
16
(1–3), pp.
354
380
.
13.
Lienhard
,
J. H.
,
1966
,
Synopsis of Lift, Drag, and Vortex Frequency Data for Rigid Circular Cylinders
,
Bulletin 300, The Technical Extension Service
,
Pullman, WA
.
14.
Achenbach
,
E.
, and
Heinecke
,
E.
,
1981
, “
On Vortex Shedding From Smooth and Rough Cylinders in the Range of Reynolds Numbers 6 × 103 to 5 × 106
,”
J. Fluid Mech.
,
109
, pp.
239
251
.
You do not currently have access to this content.