A method is proposed to calculate pack ice driving forces. In order to develop the method, stress distributions in a circular ice floe are calculated for various boundary loading conditions. The analysis is carried out using a special-purpose finite element program in which Sinha’s creep equation is used to model the behavior of ice. Charts relating pack ice driving forces to stresses in the ice floe are produced for both linear elastic and creep equations for ice behavior. The results indicate that, for a short period of loading time and at low stress levels, a linear elastic analysis can be used to calculate the pack ice driving forces. However, when the stress levels in the ice floe are high or the time span of load application is long, linear and nonlinear analyses produce much different values for pack ice driving forces.

1.
Comfort, G., and Ritch, R., 1990, “Field Measurement of Pack Ice Stresses,” Proceedings of 9th International Conference of OMAE, ASME, Houston, TX, Vol. 4, pp. 177–181.
2.
Comfort, G., Ritch, R., and Frederking, R. M. W., 1992, “Pack Ice Stress Measurements,” Proceedings of 11th International Conference of OMAE, ASME, Calgary, Alberta, Canada, Vol. 4, pp. 245–253.
3.
Croasdale, K. R., 1984, “The Limit Driving Force Approach to Ice Loads,” Offshore Technology Conference, OTC Paper No. 4716, Houston, TX, pp. 57–64.
4.
Croasdale, K. R., Comfort, G., and Graham, B. W., 1986, “A Pilot Project to Measure Pack Ice Driving Forces,” Contract Report submitted jointly by K. R. Croasdale and Associates and Arctec Canada Ltd. to the Institute of Ocean Sciences, Department of Fisheries and Oceans.
5.
Croasdale, K. R., Comfort, G., Frederking, R. M. W., Graham, B. W., and Lewis, E. L., 1987, “A Pilot Experiment to Measure Pack Ice Driving Forces,” POAC, Fairbanks, Alaska, Vol. 3, pp. 381–395.
6.
Evgin, E., and Amor, F., 1988, “Analysis of Stress Distributions in an Ice Floe,” University of Ottawa Report prepared under Contract No. 987-4474R for the National Research Council of Canada.
7.
Frederking, R. M. W., and Evgin, E., 1990, “Analysis of Stress Distributions in an Ice Floe,” Proceedings of the 9th International Conference of OMAE, ASME, Houston, TX, Vol. IV, pp. 83–88.
8.
Sinha, N. K., 1981, “Deformation Behaviour of Icelike Materials in Engineering Applications,” Proceedings of International Symposium on the Mechanical Behavior of Structured Media, Ottawa, Ontario, Canada, pp. 419–430.
9.
Sinha
N. K.
,
1983
, “
Creep Model of Ice for Monotonically Increasing Stress
,”
Cold Regions Science and Technology
, Vol.
8
, pp.
25
33
.
10.
Zhan, C., 1993, “Sea Ice Behavior in Creep/Fracture Regime: An Experimental and Theoretical Study,” Ph.D. thesis, University of Ottawa, Ontario, Canada.
11.
Zienkiewicz, O. C., 1977, The Finite Element Method, McGraw-Hill Book Company, Limited, U.K.
This content is only available via PDF.
You do not currently have access to this content.