Ultrasonic guided waves (GWs) are being extensively investigated and applied to nondestructive evaluation and structural health monitoring. Guided waves are, under most circumstances, excited in a frequency range up to several hundred kilohertz or megahertz for detecting defect/damage effectively. In this regard, numerical simulation using finite element analysis (FEA) offers a powerful tool to study the interaction between wave and defect/damage. Nevertheless, the simulation, based on linear/quadratic interpolation, may be inaccurate to depict the complex wave mode shape. Moreover, the mass lumping technique used in FEA for diagonalizing mass matrix in the explicit time integration may also undermine the calculation accuracy. In recognition of this, a time domain spectral element method (SEM)—a high-order FEA with Gauss–Lobatto–Legendre (GLL) node distribution and Lobatto quadrature algorithm—is studied to accurately model wave propagation. To start with, a simplified two-dimensional (2D) plane strain model of Lamb wave propagation is developed using SEM. The group velocity of the fundamental antisymmetric mode () is extracted as indicator of accuracy, where SEM exhibits a trend of quick convergence rate and high calculation accuracy (0.03% error). A benchmark study of calculation accuracy and efficiency using SEM is accomplished. To further extend SEM-based simulation to interpret wave propagation in structures of complex geometry, a three-dimensional (3D) SEM model with arbitrary in-plane geometry is developed. Three-dimensional numerical simulation is conducted in which the scattering of mode by a through hole is interrogated, showing a good match with experimental and analytical results.
Skip Nav Destination
Article navigation
Research-Article
A Benchmark Study of Modeling Lamb Wave Scattering by a Through Hole Using a Time-Domain Spectral Element Method
Menglong Liu,
Menglong Liu
Institute of High Performance Computing,
A*STAR,
Singapore 138632
A*STAR,
Singapore 138632
Search for other works by this author on:
David Schmicker,
David Schmicker
Institute for Mechanics,
Otto-von-Guericke University of Magdeburg,
Magdeburg 39106, Germany
Otto-von-Guericke University of Magdeburg,
Magdeburg 39106, Germany
Search for other works by this author on:
Zhongqing Su,
Zhongqing Su
Department of Mechanical Engineering,
The Hong Kong Polytechnic University,
Hong Kong 518000, China
The Hong Kong Polytechnic University,
Hong Kong 518000, China
Search for other works by this author on:
Fangsen Cui
Fangsen Cui
Institute of High Performance Computing,
A*STAR,
Singapore 138632
A*STAR,
Singapore 138632
Search for other works by this author on:
Menglong Liu
Institute of High Performance Computing,
A*STAR,
Singapore 138632
A*STAR,
Singapore 138632
David Schmicker
Institute for Mechanics,
Otto-von-Guericke University of Magdeburg,
Magdeburg 39106, Germany
Otto-von-Guericke University of Magdeburg,
Magdeburg 39106, Germany
Zhongqing Su
Department of Mechanical Engineering,
The Hong Kong Polytechnic University,
Hong Kong 518000, China
The Hong Kong Polytechnic University,
Hong Kong 518000, China
Fangsen Cui
Institute of High Performance Computing,
A*STAR,
Singapore 138632
A*STAR,
Singapore 138632
1Corresponding authors.
Manuscript received August 25, 2017; final manuscript received November 1, 2017; published online January 16, 2018. Assoc. Editor: Paul Fromme.
ASME J Nondestructive Evaluation. May 2018, 1(2): 021006-021006-8 (8 pages)
Published Online: January 16, 2018
Article history
Received:
August 25, 2017
Revised:
November 1, 2017
Citation
Liu, M., Schmicker, D., Su, Z., and Cui, F. (January 16, 2018). "A Benchmark Study of Modeling Lamb Wave Scattering by a Through Hole Using a Time-Domain Spectral Element Method." ASME. ASME J Nondestructive Evaluation. May 2018; 1(2): 021006–021006–8. https://doi.org/10.1115/1.4038722
Download citation file:
Get Email Alerts
Cited By
Similarity analysis to enhance Transfer Learning for Damage Detection
ASME J Nondestructive Evaluation
Stress Evaluation of Ferromagnetic Materials Based on a New Barkhausen Noise Sensor Composed by High Entropy Alloy Magnetic Core
ASME J Nondestructive Evaluation (August 2025)
Long Short-Term Memory Autoencoder for Anomaly Detection in Rails Using Laser Doppler Vibrometer Measurements
ASME J Nondestructive Evaluation (August 2025)
In Situ Acoustic Emission Investigation of Asphalt Fracture Process and Damage Quantification for Different Asphalt Mixtures
ASME J Nondestructive Evaluation (August 2025)
Related Articles
A Spectral Finite Element Model for Wave Propagation Analysis in Laminated Composite Plate
J. Vib. Acoust (August,2006)
Improved Global-Local Method for Ultrasonic Guided Wave Scattering Predictions in Composite Waveguides and Defects
ASME J Nondestructive Evaluation (November,2023)
Experimental Validation of Transient Spectral Finite Element Simulation Tools Dedicated to Guided Wave-Based Structural Health Monitoring
ASME J Nondestructive Evaluation (November,2021)
Guided Waves in Thin-Walled Structural Members
J. Vib. Acoust (July,2001)
Related Proceedings Papers
Related Chapters
Introduction
Computer Vision for Structural Dynamics and Health Monitoring
Achievements, Challenges, and Opportunities
Computer Vision for Structural Dynamics and Health Monitoring
Application of NDE Data to Finite Element Analysis of Parts Containing Defects
Damage Detection in Composite Materials