Topics: Micromanufacturing , Nanomanufacturing , Additive manufacturing , Lasers , Manufacturing , Micromilling , Vibration , Adhesion , Carbon , Cathode ray oscilloscopes

Special Section Papers

Subwavelength Direct Laser Nanopatterning Via Microparticle Arrays for Functionalizing Metallic Surfaces

Jean-Michel Romano, Rajib Ahmed, Antonio Garcia-Giron, Pavel Penchev, Haider Butt, Olivier Delléa, Melissa Sikosana, Ralf Helbig, Carsten Werner, Stefan Dimov

J. Micro Nano-Manuf. March 2019, 7(1): 010901. doi: https://doi.org/10.1115/1.4042964

Abstract

View articletitled, Subwavelength Direct Laser Nanopatterning Via Microparticle Arrays for Functionalizing Metallic Surfaces

Open the PDF for in another window

Topics: Irradiation (Radiation exposure) , Lasers , Wavelength , Metal surfaces

Accuracy of Conventional Finite Element Models in Bulk-Forming of Micropins From Sheet Metal

M. Kraus, T. Hufnagel, M. Merklein

J. Micro Nano-Manuf. March 2019, 7(1): 010902. doi: https://doi.org/10.1115/1.4042965

Abstract

View articletitled, Accuracy of Conventional Finite Element Models in Bulk-Forming of Micropins From Sheet Metal

Open the PDF for in another window

Topics: Blanks , Finite element model , Friction , Microscale devices , Sheet metal , Displacement , Work hardening , Tribology

Micro-Abrasive Water Jet and Micro-WEDM Process Chain Assessment for Fabricating Microcomponents

Francesco Modica, Vito Basile, Francesco Viganò, Francesco Arleo, Massimiliano Annoni, Irene Fassi

J. Micro Nano-Manuf. March 2019, 7(1): 010903. doi: https://doi.org/10.1115/1.4042966

Abstract

View articletitled, Micro-Abrasive Water Jet and Micro-WEDM Process Chain Assessment for Fabricating Microcomponents

Open the PDF for in another window

Topics: Chain , Electrical discharge machining , Machining , Surface roughness , Water , Finishing , Springs , Clearances (Engineering)

Green-State Micromilling of Additive Manufactured AISI316 L

Sandeep Kuriakose, Paolo Parenti, Salvatore Cataldo, Massimiliano Annoni

J. Micro Nano-Manuf. March 2019, 7(1): 010904. doi: https://doi.org/10.1115/1.4042977

Abstract

View articletitled, Green-State Micromilling of Additive Manufactured AISI316 L

Open the PDF for in another window

Topics: Additive manufacturing , Extruding , Feedstock , Micromilling , Surface quality , Surface roughness , Temperature , Milling , Cutting

Influence of the Planetary Movement of Tool on the Aspect Ratio of Micro Holes Machined by Micro-Ultrasonic Machining

Senwang Lei, Zuyuan Yu, Kai Zhou, Jianzhong Li, Renke Kang

J. Micro Nano-Manuf. March 2019, 7(1): 010905. doi: https://doi.org/10.1115/1.4043171

Abstract

View articletitled, Influence of the Planetary Movement of Tool on the Aspect Ratio of Micro Holes Machined by Micro-Ultrasonic Machining

Open the PDF for in another window

Topics: Machining

Large-Area Electron Beam Melting: Frequency Analysis and Critical Frequency Prediction

Brodan Richter, Frank E. Pfefferkorn

J. Micro Nano-Manuf. March 2019, 7(1): 010906. doi: https://doi.org/10.1115/1.4043236

Abstract

View articletitled, Large-Area Electron Beam Melting: Frequency Analysis and Critical Frequency Prediction

Open the PDF for in another window

Topics: Cathode ray oscilloscopes , Electron beams , Melting , Polishing , Temperature , Surface roughness

Radial Throw in Micromilling: A Simulation-Based Study to Analyze the Effects on Surface Quality and Uncut Chip Thickness

Sudhanshu Nahata, Recep Onler, O. Burak Ozdoganlar

J. Micro Nano-Manuf. March 2019, 7(1): 010907. doi: https://doi.org/10.1115/1.4043176

Abstract

View articletitled, Radial Throw in Micromilling: A Simulation-Based Study to Analyze the Effects on Surface Quality and Uncut Chip Thickness

Open the PDF for in another window

Topics: Cutting , Errors , Micromilling , Simulation , Solid-liquid equilibrium , Surface roughness , Trajectories (Physics) , Rotation , Micromachining , Kinematics

A Real-Time Stability Indicator for Micromilling: An Experimental Validation

Shashwat Kushwaha, Benjamin Gorissen, Jun Qian, Dominiek Reynaerts

J. Micro Nano-Manuf. March 2019, 7(1): 010908. doi: https://doi.org/10.1115/1.4043275

Abstract

View articletitled, A Real-Time Stability Indicator for Micromilling: An Experimental Validation

Open the PDF for in another window

Topics: Chatter , Cutting , Micromilling , Stability , Milling , Displacement

Research Papers

Nanoparticle Emissions From Metal-Assisted Chemical Etching of Silicon Nanowires for Lithium Ion Batteries

Fenfen Wang, Xianfeng Gao, Lulu Ma, Chris Yuan

J. Micro Nano-Manuf. March 2019, 7(1): 011001. doi: https://doi.org/10.1115/1.4042383

Abstract

View articletitled, Nanoparticle Emissions From Metal-Assisted Chemical Etching of Silicon Nanowires for Lithium Ion Batteries

Open the PDF for in another window

Topics: Emissions , Lithium-ion batteries , Nanoparticles , Nanowires , Particulate matter , Silicon , Metals , Water , Chemical etching , Etching

Quantitative Measurement of Functional Groups on Nanocarbon Allotropes Surface by Boehm Titration

M. Hernández-Ortiz, J. D. Lozano-López, S. M. Durón, M. Galván-Valencia, Y. Estevez-Martínez, H. A. Durán-Muñoz, J. Carrera-Escobedo, O. Guirette-Barbosa, I. Ortiz-Medina, L. A. Ramírez-Hernández, V. M. Castaño-Meneses

J. Micro Nano-Manuf. March 2019, 7(1): 011002. doi: https://doi.org/10.1115/1.4043419

Abstract

View articletitled, Quantitative Measurement of Functional Groups on Nanocarbon Allotropes Surface by Boehm Titration

Open the PDF for in another window

Topics: Carbon , Carbon dioxide , Carbon nanotubes , Errors , Oxidation , Uncertainty , Blanks

Design of Tool for Exfoliation of Monocrystalline Microscale Silicon Films

Martin Ward, Michael Cullinan

J. Micro Nano-Manuf. March 2019, 7(1): 011003. doi: https://doi.org/10.1115/1.4043420

Abstract

View articletitled, Design of Tool for Exfoliation of Monocrystalline Microscale Silicon Films

Open the PDF for in another window

Topics: Design , Engineering prototypes , Fracture (Materials) , Semiconductor wafers , Silicon , Stress , Surface roughness , Tension , Thin films , Wedges

Aerosol Jet^® Direct-Write for Microscale Additive Manufacturing

James Q. Feng, Michael J. Renn

J. Micro Nano-Manuf. March 2019, 7(1): 011004. doi: https://doi.org/10.1115/1.4043595

Abstract

View articletitled, Aerosol Jet<sup>®</sup> Direct-Write for Microscale Additive Manufacturing

Open the PDF for in another window

Topics: Aerosols , Drops , Inks , Nozzles , Printing , Flight , Evaporation , Gas flow , Flow (Dynamics) , Additive manufacturing

Polymer Stamp-Based Mechanical Exfoliation of Thin High-Quality Pyrolytic Graphite Sheets

David Hahn, Buddhika Jayasena, Zhigang Jiang, Shreyes N. Melkote

J. Micro Nano-Manuf. March 2019, 7(1): 011005. doi: https://doi.org/10.1115/1.4043502

Abstract

View articletitled, Polymer Stamp-Based Mechanical Exfoliation of Thin High-Quality Pyrolytic Graphite Sheets

Open the PDF for in another window

Topics: Graphite , Oscillations , Plasma desorption mass spectrometry , Polymers , Shear (Mechanics) , Diluents

All Issues

Email alerts

Accepted Manuscript Alert

New Issue Alert

RSS Feeds

Open Issues RSS Feed

Latest
Most Read
Most Cited

Comparative Analysis of Simultaneous Electrochemical and Electrodischarge Machining Process

J. Micro Nano Sci. Eng (December 2024)

Direct Printing of High-Resolution Metallic Three-Dimensional Microneedle Arrays Via Electrohydrodynamic Jet Printing

J. Micro Nano Sci. Eng (June 2024)

On the Potential of Manufacturing Multi-Material Components With Micro/Nanocellular Structures Via the Hybrid Process of Electromagnetic Forming Injection Foaming

J. Micro Nano Sci. Eng (September 2024)

A Review on Recent Progress of Biodegradable Magnetic Microrobots for Targeted Therapeutic Delivery: Materials, Structure Designs, and Fabrication Methods

J. Micro Nano Sci. Eng (September 2024)

A FeCrAl-Al₂O₃ Composite Produced Via Laser Powder Bed Fusion of a Mixed Powder for Porous Catalyst Scaffolds

J. Micro Nano Sci. Eng (June 2024)

Guest Editorial

Special Section on Recent Advancements in Micro- and Nano‐manufacturing From the WCMNM2018—Part 1

Special Section Papers

Subwavelength Direct Laser Nanopatterning Via Microparticle Arrays for Functionalizing Metallic Surfaces

Accuracy of Conventional Finite Element Models in Bulk-Forming of Micropins From Sheet Metal

Micro-Abrasive Water Jet and Micro-WEDM Process Chain Assessment for Fabricating Microcomponents

Green-State Micromilling of Additive Manufactured AISI316 L

Influence of the Planetary Movement of Tool on the Aspect Ratio of Micro Holes Machined by Micro-Ultrasonic Machining

Large-Area Electron Beam Melting: Frequency Analysis and Critical Frequency Prediction

Radial Throw in Micromilling: A Simulation-Based Study to Analyze the Effects on Surface Quality and Uncut Chip Thickness

A Real-Time Stability Indicator for Micromilling: An Experimental Validation

Research Papers

Nanoparticle Emissions From Metal-Assisted Chemical Etching of Silicon Nanowires for Lithium Ion Batteries

Quantitative Measurement of Functional Groups on Nanocarbon Allotropes Surface by Boehm Titration

Design of Tool for Exfoliation of Monocrystalline Microscale Silicon Films

Aerosol Jet^® Direct-Write for Microscale Additive Manufacturing

Polymer Stamp-Based Mechanical Exfoliation of Thin High-Quality Pyrolytic Graphite Sheets

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

Issues

Guest Editorial

Special Section Papers

Research Papers

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only