Background: Tissue expanders are used in breast reconstruction after mastectomy to create a space for placement of permanent breast implants. The AeroForm™ Tissue Expander, developed by AirXpanders™ Inc., utilizes carbon dioxide released from an internal reservoir to inflate the expander. The released gas is contained within a high barrier material pre-formed into a breast shaped shell of the desired volume. During patient travel to higher altitude, a partially inflated expander will increase in volume proportionately to the gas fill volume. At volume levels near full, expansion is governed by the compliance of the inner gas barrier and silicone shell. Therefore, the assessment of the expander performance at altitude consists of the analysis of two operating regimes. The first regime is fill levels < 70% full where the implant, when exposed to cabin pressure, expands without significantly stressing the inner gas barrier. The second is fill levels ~>70% where the response of the inner gas barrier is important, both in terms of structural capability and determination of the volume increase. We assessed the impact of pressurized flight on expander performance in both operating regimes. Findings: The volume increase associated with altitude increase to 8000 feet (maximum cabin altitude per FAA) is typically within the range administered during post-operative fills of saline expanders. Although assessment must be conducted by a clinician, a patient can be typically expected to tolerate the increased volume with some minor discomfort, such as a feeling of tightness. At higher fill levels, the structural capability of shell has been demonstrated to withstand the additional pressure loading. At these fill levels, the expander does not expand as much, due to the structural restraint of the shell. To date, 7 subjects have flown with the expander in situ during clinical trials. All subjects were required to temporarily cease dosing up to two weeks prior. Flight travel was completed uneventfully and they reported discomfort levels ranging from none to moderate. The recommendation to cease dosing two weeks prior to flying was made to allow the expected 1 cc per day of CO2 permeation to occur, which will result in slight deflation to accommodate for the expansion of the CO2 when flying. As expected, subjects reported a sensation of pressure upon ascent which subsided on descent.
Skip Nav Destination
phatconw@iinet.net.au
Article navigation
Design Innovation Paper
Description of the AeroForm CO2-Based Tissue Expander and Assessment of the Effect of Pressurized Cabin Air Travel
Accepted Manuscript
Tony Connell,
phatconw@iinet.net.au
Tony Connell
The Mount Hospital, Perth Australia, 200 Rokeby Road, Suite 3, Perth, Subiaco 6008, Australia
phatconw@iinet.net.au
Search for other works by this author on:
Jacob Rice
Jacob Rice
Search for other works by this author on:
Tony Connell
The Mount Hospital, Perth Australia, 200 Rokeby Road, Suite 3, Perth, Subiaco 6008, Australia
phatconw@iinet.net.au
Jacob Rice
Corresponding author.
J. Med. Devices.
Published Online: June 1, 2015
Article history
Received:
January 21, 2015
Revised:
May 20, 2015
Citation
Connell, T., and Rice, J. (June 1, 2015). "Description of the AeroForm CO2-Based Tissue Expander and Assessment of the Effect of Pressurized Cabin Air Travel." ASME. J. Med. Devices. doi: https://doi.org/10.1115/1.4030812
Download citation file:
Get Email Alerts
Cited By
Controlled Ice Nucleation With a Sand-PDMS Film Device Enhances Cryopreservation of Mouse Preantral Ovarian Follicles
J. Med. Devices (December 2024)
Review of Blood and Fluid Warming Methods
J. Med. Devices (December 2024)
Related Articles
A Mathematical Model of Alveolar Gas Exchange in Partial Liquid Ventilation
J Biomech Eng (February,2005)
Analysis on Electrochemical CO 2 Reduction by Diamond Doping Technology
J. Electrochem. En. Conv. Stor (May,2023)
Discussion: “The Trend of Air Transportation” (Allen, Edmund T., 1941, Trans. ASME, 63, pp. 1–10)
Trans. ASME (January,1941)
The Trend of Air Transportation
Trans. ASME (January,1941)
Related Proceedings Papers
Related Chapters
Modeling of Electrode Processes and Surface Chemistry in Carbon Dioxide Containing Solutions
Computer Modeling in Corrosion
Processing/Structure/Properties Relationships in Polymer Blends for the Development of Functional Polymer Foams
Advances in Multidisciplinary Engineering
Clinical issues and experience
Mechanical Blood Trauma in Circulatory-Assist Devices