This work attempts to optimize stents that are implanted at the neck of coronary or cerebral aneurysms to effect a flow diversion. A two-dimensional version of the stent, which is a series of struts and gaps placed at the neck, is considered as the first step. Optimization is carried out based on the principles of exploration of design space using reductions in velocity and vorticity in the aneurysm dome as the objective functions. Latin hypercube sampling first develops 30–60 samples of a strut-gap arrangement. Flow past an aneurysm with each of these samples is computed using the commercial software FLUENT and the objective functions evaluated. This is followed by a Kriging procedure that identifies the nondominated solutions to the system, which are the optimized candidates. Three different cases of stents with rectangular or circular struts are considered. It is found that placing struts in the proximal region of the neck gives the best flow diversion.
Skip Nav Destination
e-mail: k.srinivas@usyd.edu.au
Article navigation
June 2010
Research Papers
Two-Dimensional Optimization of a Stent for an Aneurysm
K. Srinivas,
K. Srinivas
School of Aerospace, Mechanical and Mechatronic Engineering,
e-mail: k.srinivas@usyd.edu.au
University of Sydney
, New South Wales 2006, Australia; Institute of Fluid Science, Tohoku University
, 980-8577 Japan
Search for other works by this author on:
S. Townsend,
S. Townsend
School of Aerospace, Mechanical and Mechatronic Engineering,
University of Sydney
, New South Wales 2006, Australia
Search for other works by this author on:
C. J. Lee,
C. J. Lee
School of Aerospace, Mechanical and Mechatronic Engineering,
University of Sydney
, New South Wales 2006, Australia
Search for other works by this author on:
T. Nakayama,
T. Nakayama
Institute of Fluid Science,
Tohoku University
, 980-8577 Japan
Search for other works by this author on:
M. Ohta,
M. Ohta
Institute of Fluid Science,
Tohoku University
, 980-8577 Japan
Search for other works by this author on:
S. Obayashi,
S. Obayashi
Institute of Fluid Science,
Tohoku University
, 980-8577 Japan
Search for other works by this author on:
T. Yamaguchi
T. Yamaguchi
Department of Bioengineering and Robotics, Graduate School of Engineering,
Tohoku University
, 980-8577 Japan
Search for other works by this author on:
K. Srinivas
School of Aerospace, Mechanical and Mechatronic Engineering,
University of Sydney
, New South Wales 2006, Australia; Institute of Fluid Science, Tohoku University
, 980-8577 Japane-mail: k.srinivas@usyd.edu.au
S. Townsend
School of Aerospace, Mechanical and Mechatronic Engineering,
University of Sydney
, New South Wales 2006, Australia
C. J. Lee
School of Aerospace, Mechanical and Mechatronic Engineering,
University of Sydney
, New South Wales 2006, Australia
T. Nakayama
Institute of Fluid Science,
Tohoku University
, 980-8577 Japan
M. Ohta
Institute of Fluid Science,
Tohoku University
, 980-8577 Japan
S. Obayashi
Institute of Fluid Science,
Tohoku University
, 980-8577 Japan
T. Yamaguchi
Department of Bioengineering and Robotics, Graduate School of Engineering,
Tohoku University
, 980-8577 JapanJ. Med. Devices. Jun 2010, 4(2): 021003 (7 pages)
Published Online: August 4, 2010
Article history
Received:
April 2, 2009
Revised:
April 23, 2010
Online:
August 4, 2010
Published:
August 4, 2010
Citation
Srinivas, K., Townsend, S., Lee, C. J., Nakayama, T., Ohta, M., Obayashi, S., and Yamaguchi, T. (August 4, 2010). "Two-Dimensional Optimization of a Stent for an Aneurysm." ASME. J. Med. Devices. June 2010; 4(2): 021003. https://doi.org/10.1115/1.4001861
Download citation file:
Get Email Alerts
Related Articles
Impact of Stents and Flow Diverters on Hemodynamics in Idealized Aneurysm Models
J Biomech Eng (July,2011)
Hydrodynamic Effects of Compliance Mismatch in Stented Arteries
J Biomech Eng (February,2011)
Studies on Design Optimization of Coronary Stents
J. Med. Devices (March,2008)
Optimization of Strut Placement in Flow Diverter Stents for Four Different Aneurysm Configurations
J Biomech Eng (June,2014)
Related Proceedings Papers
Related Chapters
mDFA Human Empirical Results
Modified Detrended Fluctuation Analysis (mDFA)
In-Vitro Modeling of the Dynamic Forces in the Femoropopliteal Artery
Fatigue and Fracture of Medical Metallic Materials and Devices: 2nd Volume
The Quest for Fatigue-Resistant Nitinol for Medical Implants
Fourth Symposium on Fatigue and Fracture of Metallic Medical Materials and Devices