Dielectrophoresis (DEP) can be an effective tool to show the physiological change of bacterial cells. The behavior of bacterial cells under an electric field is complicated due to the combined effects of electrokinetic phenomena. This paper presents the study of the electrokinetic behavior of heat-treated Mycobacterium bovis Bacillus Calmette-Guérin (BCG) cells for a cell counting method. Through numerical and experimental study, heat-treated BCG cells are compared with control BCG cells. At various frequencies with the medium conductivity of 0.07 S/m, the equilibrium positions of both control- and heat-treated cells are analyzed in the combined fields of DEP and AC electroosmosis (ACEO). As DEP changes from negative to positive in electroosmotic flow, the equilibrium position of cells is bifurcated from the upper center between two electrodes onto the edges of both electrodes. It was found that the cells floating on electrodes should not be counted as attracted cells because the floating was resulted from the combined effect of the negative DEP and ACEO. According to the analysis, an optimum frequency is proposed to differentiate control cells from heat-treated cells using a cell counting method. The presented study will offer physical insight for the cell counting to differentiate live and dead Mycobacterium bovis BCG cells treated with heat and drugs.
Skip Nav Destination
Article navigation
December 2018
Research-Article
Electrokinetic Behavior of Heat-Treated Mycobacterium Bacillus Calmette-Guérin Cells
Hyun-Boo Lee,
Hyun-Boo Lee
Department of Mechanical Engineering,
University of Washington,
P.O. Box 352600,
Seattle, WA 98195
e-mail: hyunboo1@gmail.com
University of Washington,
P.O. Box 352600,
Seattle, WA 98195
e-mail: hyunboo1@gmail.com
Search for other works by this author on:
Shinnosuke Inoue,
Shinnosuke Inoue
Department of Mechanical Engineering,
University of Washington,
P.O. Box 352600,
Seattle, WA 98195
e-mail: nexis210@gmail.com
University of Washington,
P.O. Box 352600,
Seattle, WA 98195
e-mail: nexis210@gmail.com
Search for other works by this author on:
Jong-Hoon Kim,
Jong-Hoon Kim
School of Engineering and Computer Science,
Washington State University,
Vancouver, WA 98686
e-mail: jh.kim@wsu.edu
Washington State University,
Vancouver, WA 98686
e-mail: jh.kim@wsu.edu
Search for other works by this author on:
Minjoong Jeong,
Minjoong Jeong
National Supercomputing Center,
Korea Institute of Science and Technology
Information,
Daejeon 34141, South Korea
e-mail: jeong@kisti.re.kr
Korea Institute of Science and Technology
Information,
Daejeon 34141, South Korea
e-mail: jeong@kisti.re.kr
Search for other works by this author on:
Jae-Hyun Chung
Jae-Hyun Chung
Department of Mechanical Engineering,
University of Washington,
P.O. Box 352600,
Seattle, WA 98195
e-mail: jae71@uw.edu
University of Washington,
P.O. Box 352600,
Seattle, WA 98195
e-mail: jae71@uw.edu
Search for other works by this author on:
Hyun-Boo Lee
Department of Mechanical Engineering,
University of Washington,
P.O. Box 352600,
Seattle, WA 98195
e-mail: hyunboo1@gmail.com
University of Washington,
P.O. Box 352600,
Seattle, WA 98195
e-mail: hyunboo1@gmail.com
Shinnosuke Inoue
Department of Mechanical Engineering,
University of Washington,
P.O. Box 352600,
Seattle, WA 98195
e-mail: nexis210@gmail.com
University of Washington,
P.O. Box 352600,
Seattle, WA 98195
e-mail: nexis210@gmail.com
Jong-Hoon Kim
School of Engineering and Computer Science,
Washington State University,
Vancouver, WA 98686
e-mail: jh.kim@wsu.edu
Washington State University,
Vancouver, WA 98686
e-mail: jh.kim@wsu.edu
Minjoong Jeong
National Supercomputing Center,
Korea Institute of Science and Technology
Information,
Daejeon 34141, South Korea
e-mail: jeong@kisti.re.kr
Korea Institute of Science and Technology
Information,
Daejeon 34141, South Korea
e-mail: jeong@kisti.re.kr
Jae-Hyun Chung
Department of Mechanical Engineering,
University of Washington,
P.O. Box 352600,
Seattle, WA 98195
e-mail: jae71@uw.edu
University of Washington,
P.O. Box 352600,
Seattle, WA 98195
e-mail: jae71@uw.edu
1Corresponding author.
Manuscript received February 28, 2018; final manuscript received June 22, 2018; published online September 21, 2018. Assoc. Editor: Yaling Liu.
J. Med. Devices. Dec 2018, 12(4): 041006 (9 pages)
Published Online: September 21, 2018
Article history
Received:
February 28, 2018
Revised:
June 22, 2018
Citation
Lee, H., Inoue, S., Kim, J., Jeong, M., and Chung, J. (September 21, 2018). "Electrokinetic Behavior of Heat-Treated Mycobacterium Bacillus Calmette-Guérin Cells." ASME. J. Med. Devices. December 2018; 12(4): 041006. https://doi.org/10.1115/1.4040677
Download citation file:
Get Email Alerts
Cited By
Related Articles
Comparison of Experiments and Simulation of Joule Heating in ac Electrokinetic Chips
J. Fluids Eng (February,2010)
Towards New Methodologies for Manipulation of Colloidal Particles in a Miniaturized Fluidic Device: Optoelectrokinetic Manipulation Technique
J. Fluids Eng (February,2013)
Flow Characteristics and Heat Transfer Enhancement of Electro-Thermo-Convection in Dielectric Liquids with Residual Conductivity
J. Heat Mass Transfer (January,0001)
Monte Carlo Investigation of Particle Properties Affecting TPB Formation and Conductivity in Composite Solid Oxide Fuel Cell Electrode-Electrolyte Interfaces
J. Fuel Cell Sci. Technol (October,2011)
Related Proceedings Papers
Related Chapters
Discussion of Parameters to Be Monitored
Consensus on Operating Practices for the Sampling and Monitoring of Feedwater and Boiler Water Chemistry in Modern Industrial Boilers (CRTD-81)
PVDF/CO 3 O 4 Nanocomposites: Porosity, Crystallinity and Conductivity
International Conference on Advanced Computer Theory and Engineering, 4th (ICACTE 2011)
Handy Facts Regarding Types of Thermal Insulation
Hydraulics, Pipe Flow, Industrial HVAC & Utility Systems: Mister Mech Mentor, Vol. 1