The CardioMEMS heart failure (HF) system was tested for cardiac output (CO) measurement accuracy using an in vitro mock circulatory system. A software algorithm calculates CO based on analysis of the pressure waveform as measured from the pulmonary artery, where the CardioMEMS system resides. Calculated CO was compared to that from reference flow probe in the circulatory system model. CO measurements were compared over a clinically relevant range of stroke volumes and heart rates with normal, pulmonary hypertension (PH), decompensated left heart failure (DLHF), and combined DHLF + PH hemodynamic conditions. The CardioMEMS CO exhibited minimal fixed and proportional bias.
Validation of Cardiac Output as Reported by a Permanently Implanted Wireless Sensor
Manuscript received April 21, 2015; final manuscript received October 1, 2015; published online November 5, 2015. Editor: Rupak K. Banerjee.
- Views Icon Views
- Share Icon Share
- Cite Icon Cite
- Search Site
Tree, M., White, J., Midha, P., Kiblinger, S., and Yoganathan, A. (November 5, 2015). "Validation of Cardiac Output as Reported by a Permanently Implanted Wireless Sensor." ASME. J. Med. Devices. March 2016; 10(1): 011001. https://doi.org/10.1115/1.4031799
Download citation file:
- Ris (Zotero)
- Reference Manager