Skip Nav Destination
Issues
April 1978
ISSN 0161-8458
In this Issue
Editorial
Research Papers
Load Distribution in Timing Belts
J. Mech. Des. April 1978, 100(2): 208–215.
doi: https://doi.org/10.1115/1.3453902
Topics:
Stress
,
Timing belts
,
Belts
,
Elastic constants
,
Tension
,
Finite element methods
,
Friction
,
Glass fibers
,
Neoprene rubber
,
Pulleys
An Experimental Study of the Steady-State Response of Oil-Film Dampers
J. Mech. Des. April 1978, 100(2): 216–221.
doi: https://doi.org/10.1115/1.3453903
Topics:
Dampers
,
Steady state
,
Rotors
,
Bearings
,
Springs
,
Center of mass
,
Damping
,
Deflection
,
Design
,
Displacement
An Analytic Study of the Energy Dissipation of Turbomachinery Bladed-Disk Assemblies Due to Inter-Shroud Segment Rubbing
J. Mech. Des. April 1978, 100(2): 222–228.
doi: https://doi.org/10.1115/1.3453904
Topics:
Disks
,
Energy dissipation
,
Turbomachinery
,
Stress
,
Damping
,
Boundary-value problems
,
Computational methods
,
Coulombs
,
Deflection
,
Flutter (Aerodynamics)
Detection of Rolling Element Bearing Damage by Statistical Vibration Analysis
J. Mech. Des. April 1978, 100(2): 229–235.
doi: https://doi.org/10.1115/1.3453905
Topics:
Damage
,
Rolling bearings
,
Vibration analysis
,
Bearings
,
Flaw detection
,
Stress
,
Trend analysis
,
Vibration
Analysis of Performance of Pneumatic Impact Absorbers
J. Mech. Des. April 1978, 100(2): 236–241.
doi: https://doi.org/10.1115/1.3453906
Dynamics of a High-Speed Sliding Power Collector in Consideration of Sliding Friction
J. Mech. Des. April 1978, 100(2): 242–250.
doi: https://doi.org/10.1115/1.3453907
Topics:
Dynamics (Mechanics)
,
Sliding friction
,
Rails
,
Stiffness
,
Computer simulation
,
Linearization techniques
,
Probability
,
Railroads
,
Waves
Residual-Flexibility Corrections for Transient Modal Rotordynamic Models
J. Mech. Des. April 1978, 100(2): 251–256.
doi: https://doi.org/10.1115/1.3453908
Topics:
Transients (Dynamics)
,
Bearings
,
Rotors
,
Computers
,
Damping
,
Dynamics (Mechanics)
,
Engines
,
Oxygen
,
Pressure
,
Simulation
Transient Response of a Rotor in Damped Bearings
J. Mech. Des. April 1978, 100(2): 257–265.
doi: https://doi.org/10.1115/1.3453909
Topics:
Bearings
,
Rotors
,
Transients (Dynamics)
,
Displacement
,
Damping
,
Excitation
,
Modal analysis
,
Mode shapes
,
Stiffness
Model Verification of Mixed Dynamic Systems
J. Mech. Des. April 1978, 100(2): 266–273.
doi: https://doi.org/10.1115/1.3453910
Topics:
Dynamic systems
,
Mathematics
,
Modeling
,
Network models
,
Parameter estimation
,
Uncertainty
Design of Clamped Composite-Material Plates to Maximize Fundamental Frequency
J. Mech. Des. April 1978, 100(2): 274–278.
doi: https://doi.org/10.1115/1.3453911
Topics:
Composite materials
,
Design
,
Plates (structures)
,
Anisotropy
,
Density
,
Dimensions
,
Laminates
,
Optimization
,
Vibration
Alternative Tuned Absorbers for Steady State Vibration Control of Tall Structures
J. Mech. Des. April 1978, 100(2): 279–285.
doi: https://doi.org/10.1115/1.3453912
Topics:
Steady state
,
Vibration control
,
Damping
,
Structures
,
Torsion
,
Vibration
,
Vibration absorbers
Application of Goal Programming to Machinability Data Optimization
J. Mech. Des. April 1978, 100(2): 286–291.
doi: https://doi.org/10.1115/1.3453913
Topics:
Computer programming
,
Machinability
,
Optimization
,
Machining
,
Manufacturing
,
Turning
A Boundary Tracking Optimization Algorithm for Constrained Nonlinear Problems
J. Mech. Des. April 1978, 100(2): 292–296.
doi: https://doi.org/10.1115/1.3453914
Topics:
Computer programming
,
Optimization
,
Optimization algorithms
The Riccati Transfer Matrix Method
J. Mech. Des. April 1978, 100(2): 297–302.
doi: https://doi.org/10.1115/1.3453915
Topics:
Resonance
,
Storage
,
Structural elements (Construction)
Design Synthesis of a Multi-Speed Machine Tool Gear Transmission Using Multiparameter Optimization
J. Mech. Des. April 1978, 100(2): 303–310.
doi: https://doi.org/10.1115/1.3453916
Topics:
Design
,
Gears
,
Machine tools
,
Optimization
,
Mechanical drives
,
Algebra
,
Gear trains
Sensitivity Analysis and Optimization of Structures for Dynamic Response
J. Mech. Des. April 1978, 100(2): 311–318.
doi: https://doi.org/10.1115/1.3453917
Optimality Criterion Techniques Applied to Mechanical Design
J. Mech. Des. April 1978, 100(2): 319–327.
doi: https://doi.org/10.1115/1.3453918
Topics:
Computer programming
,
Design
,
Design engineering
,
Stress
,
Weight (Mass)
Instabilities of Tubular Beams Simultaneously Subjected to Internal and External Axial Flows
J. Mech. Des. April 1978, 100(2): 328–336.
doi: https://doi.org/10.1115/1.3453919
Dynamics of Neutrally Buoyant Inflated Viscoelastic Tapered Cantilevers Used in Underwater Applications
J. Mech. Des. April 1978, 100(2): 337–346.
doi: https://doi.org/10.1115/1.3453920
Fluidelastic Vibration of Heat Exchanger Tube Arrays
J. Mech. Des. April 1978, 100(2): 347–353.
doi: https://doi.org/10.1115/1.3453921
Topics:
Heat exchangers
,
Vibration
,
Whirls
,
Cross-flow
,
Flow (Dynamics)
,
Design methodology
,
Excitation
,
Water tunnels
,
Wind tunnels
On Some Aspects of Unsteady Aerodynamics and Vortex Induced Oscillations of Elliptic Cylinders at Subcritical Reynolds Number
J. Mech. Des. April 1978, 100(2): 354–362.
doi: https://doi.org/10.1115/1.3453922
Topics:
Aerodynamics
,
Cylinders
,
Oscillations
,
Reynolds number
,
Vortices
,
Pressure
,
Wind velocity
,
Design
,
Displacement
,
Mechanical properties
Rotational Vibration With Backlash: Part 1
J. Mech. Des. April 1978, 100(2): 363–373.
doi: https://doi.org/10.1115/1.3453923
Topics:
Vibration
,
Gears
,
Stress
,
Damage
,
Displacement
,
Excitation
,
Oscillations
,
Rotation
,
Testing
Bending of Stub Cantilever Plate and Some Applications to Strength of Gear Teeth
J. Mech. Des. April 1978, 100(2): 374–381.
doi: https://doi.org/10.1115/1.3453924
Topics:
Cantilevers
,
Gear teeth
,
Spur gears
,
Approximation
,
Corners (Structural elements)
,
Deflection
,
Deformation
,
Errors
,
Finite element analysis
,
Helical gears
Bending Stress in Gear Teeth Having Circular Arc Profiles—Part 1: Analysis
J. Mech. Des. April 1978, 100(2): 382–394.
doi: https://doi.org/10.1115/1.3453925
Topics:
Bending (Stress)
,
Gear teeth
,
Stress
,
Gears
,
Pressure
,
Wedges
Bending Stress in Gear Teeth Having Circular Arc Profiles—Part 2: Experimental Investigation
J. Mech. Des. April 1978, 100(2): 395–403.
doi: https://doi.org/10.1115/1.3453926
Topics:
Bending (Stress)
,
Gear teeth
,
Wedges
,
Pressure
,
Tension
,
Compressive stress
,
Stress
Discussions
Discussion: “Bending Stress in Gear Teeth Having Circular Arc Profiles—Parts 1 and 2” (Errichello, R., 1978, ASME J. Mech. Des., 100, pp. 382–403)
J. Mech. Des. April 1978, 100(2): 404.
doi: https://doi.org/10.1115/1.3453927
Topics:
Bending (Stress)
,
Gear teeth
Closure to “Discussion of ‘Bending Stress in Gear Teeth Having Circular Arc Profiles—Parts 1 and 2’” (1978, ASME J. Mech. Des., 100, p. 404)
J. Mech. Des. April 1978, 100(2): 404.
doi: https://doi.org/10.1115/1.3453928
Topics:
Bending (Stress)
,
Gear teeth
Email alerts
RSS Feeds
Data-Driven Hybrid Modeling for Digital Twin of Large-Scale Structures With Local Nonlinearities
J. Mech. Des (December 2025)
