Abstract
Hybrid cellular automaton (HCA) method is a topology optimization method with high convergence efficiency. Harmonic response topology optimization problem has been widely researched and common frequency-domain methods have been applied to solve this problem. Despite this, little work has so far been undertaken to utilize the HCA method to improve the calculation efficiency of harmonic response topology optimization. In this article, we present a methodology that applies the HCA method to solve harmonic response topology optimization problem. Mode displacement method (MDM), mode acceleration method (MAM), and full method (FM) are common frequency-domain methods that are utilized as harmonic response analysis methods in this study. The examples under rotating loads demonstrate that feasibility of this methodology at one specific frequency excitation and multiple frequencies excitation. This article presents and implements a high convergence efficiency method for harmonic response topology optimization, and this method can converge in 20–30 iterations. This method can extend the application range of the HCA method and improve the optimization efficiency of harmonic response topology optimization.
Issue Section:
Design Automation
References
1.
Tovar
, A.
, Patel
, N. M.
, Niebur
, G. L.
, Sen
, M.
, and Renaud
, J. E.
, 2006
, “Topology Optimization Using a Hybrid Cellular Automation Method With Local Control Rules
,” ASME J. Mech. Des.
, 128
(6
), pp. 1205
–1216
. 2.
Patel
, N. M.
, Penninger
, C. L.
, and Renaud
, J. E.
, 2009
, “Topology Synthesis of Extrusion-Based Nonlinear Transient Designs
,” ASME J. Mech. Des.
, 131
(6
), p. 061003. 3.
Patel
, N. M.
, Kang
, B. S.
, Renaud
, J. E.
, and Tovar
, A.
, 2009
, “Crashworthiness Design Using Topology Optimization
,” ASME J. Mech. Des.
, 131
(6
), p. 061013. 4.
Hunkeler
, S.
, Duddeck
, F.
, and Rayamajhi
, M.
, 2013
, “Topology Optimisation Method for Crashworthiness Design Using Hybrid Cellular Automata and Thin-Walled Ground Structures
,” 9th Europ LS-DYNA Conference
, Manchester, UK
, June 2013
.5.
Bandi
, P.
, Schmiedeler
, J. P.
, and Tovar
, A.
, 2013
, “Design of Crashworthy Structures With Controlled Energy Absorption in the Hybrid Cellular Automaton Framework
,” ASME J. Mech. Des.
, 135
(9
), p. 091002
. 6.
Duddeck
, F.
, Hunkeler
, S.
, Lozano
, P.
, Wehrle
, E.
, and Zeng
, D.
, 2016
, “Topology Optimization for Crashworthiness of Thin-Walled Structures Under Axial Impact Using Hybrid Cellular Automata
,” Struct. Multidiscipl. Optim.
, 54
(3
), pp. 415
–428
. 7.
Afrousheh
, M.
, Marzbanrad
, J.
, and Göhlich
, D.
, 2019
, “Topology Optimization of Energy Absorbers Under Crashworthiness Using Modified Hybrid Cellular Automata (MHCA) Algorithm
,” Struct. Multidiscipl. Optim.
, 60
(3
), pp. 1021
–1034
. 8.
Zhang
, X.
, Wang
, D.
, Huang
, B.
, Wang
, S.
, Zhang
, Z.
, Li
, S.
, Xie
, C.
, and Kong
, D.
, 2023
, “A Dynamic-Static Coupling Topology Optimization Method Based on Hybrid Cellular Automata
,” Structures
, 50
, pp. 1573
–1583
. 9.
Ma
, Z.-D.
, Kikuchi
, N.
, and Cheng
, H.-C.
, 1995
, “Topological Design for Vibrating Structures
,” Comput. Methods Appl. Mech. Engrg
, 121
(1–4
), pp. 259
–280
. 10.
Jog
, C. S.
, 2002
, “Topology Design of Structures Subjected to Periodic Loading
,” J. Sound Vib.
, 253
(3
), pp. 687
–709
. 11.
Yoon
, G. H.
, 2010
, “Structural Topology Optimization for Frequency Response Problem Using Model Reduction Schemes
,” Comput. Methods Appl. Mech. Eng.
, 199
(25–28
), pp. 1744
–1763
. 12.
Liu
, H.
, Zhang
, W.
, and Gao
, T.
, 2015
, “A Comparative Study of Dynamic Analysis Methods for Structural Topology Optimization Under Harmonic Force Excitations
,” Struct. Multidiscipl. Optim.
, 51
(6
), pp. 1321
–1333
. 13.
Zhao
, X.
, Wu
, B.
, Li
, Z.
, and Zhong
, H.
, 2018
, “A Method for Topology Optimization of Structures Under Harmonic Excitations
,” Struct. Multidiscipl. Optim.
, 58
(2
), pp. 475
–487
. 14.
Kang
, Z.
, Zhang
, X.
, Jiang
, S.
, and Cheng
, G.
, 2012
, “On Topology Optimization of Damping Layer in Shell Structures Under Harmonic Excitations
,” Struct. Multidiscipl. Optim.
, 46
(1
), pp. 51
–67
. 15.
Yu
, Y.
, Jang
, I. G.
, and Kwak
, B. M.
, 2013
, “Topology Optimization for a Frequency Response and Its Application to a Violin Bridge
,” Struct. Multidiscipl. Optim.
, 48
(3
), pp. 627
–636
. 16.
Zhu
, J. H.
, He
, F.
, Liu
, T.
, Zhang
, W. H.
, Liu
, Q.
, and Yang
, C.
, 2018
, “Structural Topology Optimization Under Harmonic Base Acceleration Excitations
,” Struct. Multidiscipl. Optim.
, 57
(3
), pp. 1061
–1078
. 17.
Bendsùe
, M. P.
, and Sigmund
, O.
, 1999
, “Material Interpolation Schemes in Topology Optimization
,” Arch. Appl. Mech.
, 69
(9–10
), pp. 635
–654
. 18.
Zhu
, J. H.
, Beckers
, P.
, and Zhang
, W. H.
, 2010
, “On the Multi-Component Layout Design With Inertial Force
,” J. Comput. Appl. Math.
, 234
(7
), pp. 2222
–2230
. 19.
Patnaik
, S. N.
, and Hopkinsb
, D. A.
, 1998
, “Optimality of a Fully Stressed Design
,” Comput. Methods Appl. Mech. Eng.
, 165
, pp. 215
–221
. 20.
Tovar
, A.
, and Khandelwal
, K.
, 2013
, “Topology Optimization for Minimum Compliance Using a Control Strategy
,” Eng. Struct.
, 48
, pp. 674
–682
. 21.
Ziegler
, J. G.
, Nichols
, N. B.
, and Rochester
, N. Y.
, 1942
, “Optimum Settings for Automatic Controllers
,” Trans. Am. Soc. Mech. Eng.
, 64
(8
), pp. 759
–765
. 22.
Patel
, N. M.
, Kang
, B. S.
, and Renaud
, J. E.
, 2006
, “Topology Synthesis of Structures Under Impact Loading Using a Hybrid Cellular Automaton Algorithm
,” Collection of Technical Papers – 11th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference
, Portsmouth, VA
, Sept. 6–8
, Vol. 1, pp. 457
–475
.23.
Jones
, M. T.
, and Patrick
, M. L.
, 1989
, “The Use of Lanczos's Method to Solve the Large Generalized Symmetric Definite Eigenvalue Problem
,” NASA Contractor Report
, Hampton, VA
, September 1989
.24.
Besselink
, B.
, Tabak
, U.
, Lutowska
, A.
, Van de Wouw
, N.
, Nijmeijer
, H.
, Rixen
, D. J.
, Hochstenbach
, M. E.
, and Schilders
, W. H.
, 2013
, “A Comparison of Model Reduction Techniques From Structural Dynamics, Numerical Mathematics and Systems and Control
,” J. Sound Vib.
, 332
(19
), pp. 4403
–4422
. 25.
Liu
, H.
, Zhang
, W.
, and Gao
, T.
, 2016
, “Structural Topology Optimization Under Rotating Load
,” Struct. Multidiscipl. Optim.
, 53
(4
), pp. 847
–859
. 26.
Giraldo-Londoño
, O.
, Aguiló
, M. A.
, and Paulino
, G. H.
, 2021
, “Local Stress Constraints in Topology Optimization of Structures Subjected to Arbitrary Dynamic Loads: A Stress Aggregation-Free Approach
,” Struct. Multidiscipl. Optim.
, 64
(6
), pp. 3287
–3309
. 27.
Senhora
, F. V.
, Menezes
, I. F. M.
, and Paulino
, G. H.
, 2023
, “Topology Optimization With Local Stress Constraints and Continuously Varying Load Direction and Magnitude: Towards Practical Applications
,” Proc. R. Soc. A
, 479
(2271
), p. 20220436
. Copyright © 2024 by ASME
You do not currently have access to this content.
