A serial robotic manipulator arm is a complex electromechanical system whose performance is characterized by its actuators. The actuator itself is a complex nonlinear system whose performance can be characterized by the speed and torque capabilities of its motor, and its accuracy depends on the resolution of the encoder as well as its ability to resist deformations under load. The mechanical gain associated with the transmission is critical to the overall performance of the actuator since it amplifies the motor torque, thus improving the force capability of the manipulator housing it, reduces the motor speed to a suitable output speed operating range, and amplifies the stiffness improving the precision under load of the overall system. In this work, a basic analytic process that can be used to manage the actuator gain parameter to obtain an improved arm design based on a set of desired/required performance specifications will be laid out. Key to this analytic process is the mapping of the actuator parameters (speed, torque, stiffness, and encoder resolution) to their effective values at the system output via the mechanical gains of the actuators as well as the effective mechanical gains of the manipulator. This forward mapping of the actuator parameters allows the designer to determine how each of the parameters influences the functional capacity of the serial manipulator arm. The actuator gains are then distributed along the effective length of the manipulator to determine their effects on the performance capabilities of the system. The analytic formulation is also demonstrated to be effective in addressing the issue of configuration management of serial robotic manipulators where the goal is to assemble a system that meets some required performance specifications. To this end, two examples demonstrating a solution of the configuration management problem are presented. The analytic process developed based on the mapping of the mechanical parameters of the actuator to their effective values at the system output is shown to dramatically reduce the effort in the initial phases of the design process, meaning that the number of design iterations can be dramatically reduced.
Skip Nav Destination
e-mail: oziel_rios@mail.utexas.edu
e-mail: tesar@mail.utexas.edu
Article navigation
February 2009
Research Papers
Actuator Gain Distributions to Analytically Meet Specified Performance Capabilities in Serial Robot Manipulators
Oziel Rios,
Oziel Rios
Robotics Research Group, Department of Mechanical Engineering,
e-mail: oziel_rios@mail.utexas.edu
University of Texas at Austin
, Austin, TX 78758
Search for other works by this author on:
Delbert Tesar
Delbert Tesar
Director
Robotics Research Group, Department of Mechanical Engineering,
e-mail: tesar@mail.utexas.edu
University of Texas at Austin
, Austin, TX 78758
Search for other works by this author on:
Oziel Rios
Robotics Research Group, Department of Mechanical Engineering,
University of Texas at Austin
, Austin, TX 78758e-mail: oziel_rios@mail.utexas.edu
Delbert Tesar
Director
Robotics Research Group, Department of Mechanical Engineering,
University of Texas at Austin
, Austin, TX 78758e-mail: tesar@mail.utexas.edu
J. Mech. Des. Feb 2009, 131(2): 021010 (9 pages)
Published Online: January 21, 2009
Article history
Received:
October 8, 2007
Revised:
December 4, 2008
Published:
January 21, 2009
Citation
Rios, O., and Tesar, D. (January 21, 2009). "Actuator Gain Distributions to Analytically Meet Specified Performance Capabilities in Serial Robot Manipulators." ASME. J. Mech. Des. February 2009; 131(2): 021010. https://doi.org/10.1115/1.3066625
Download citation file:
Get Email Alerts
Cited By
DeepJEB: 3D Deep Learning-Based Synthetic Jet Engine Bracket Dataset
J. Mech. Des (April 2025)
Design and Justice: A Scoping Review in Engineering Design
J. Mech. Des (May 2025)
Related Articles
Design of Dissipative and Stable Assist Robots
J. Mech. Des (December,2007)
Parametric Design of
Parallel Force/Velocity Actuators: Force Distribution
Analysis
J. Mechanisms Robotics (February,2010)
A Statically Balanced Gough/Stewart-Type Platform: Conception, Design, and Simulation
J. Mechanisms Robotics (August,2009)
An Innovative Design of Artificial Knee Joint Actuator With Energy Recovery Capabilities
J. Mechanisms Robotics (February,2016)
Related Proceedings Papers
Related Chapters
QP Based Encoder Feedback Control
Robot Manipulator Redundancy Resolution
Accuracy of an Axis
Mechanics of Accuracy in Engineering Design of Machines and Robots Volume I: Nominal Functioning and Geometric Accuracy
Fans and Air Handling Systems
Thermal Management of Telecommunications Equipment