Orientating a rigid body without changing its position is required in many technical applications. This manipulation task is accomplished by manipulators (spherical manipulators) that are just able to make the end effector move according to controlled spherical motions. Spherical manipulators can be either serial or parallel. Parallel architectures are usually more stiff and precise than the serial ones, whereas their structures are more complex than the serial ones. This paper presents a new three-equal-legged spherical parallel manipulator, named the 3-RRS wrist. The 3-RRS wrist is not overconstrained and exhibits a simple architecture employing just three passive revolute pairs, three passive spherical pairs and three actuated revolute pairs adjacent to the frame. The kinematic analysis of the 3-RRS wrist is addressed and fully solved. Finally, its singularity conditions are written in explicit form and discussed. The results of this analysis lead to the conclusion that the new manipulator has only two types of singularities both easy to be identified with geometric reasoning.

Issue Section:
Technical Papers
Keywords:
end effectors, motion control, manipulator kinematics
Topics:
End effectors, Manipulators
1.
Chablat
,
D.
, and
Angeles
,
J.
,
2003
, “
The Computation of All 4R Serial Spherical Wrists With an Isotropic Architecture
,”
ASME J. Mech. Des.
,
125
(
2
), pp.
275
–
280
.
2.
Gosselin
,
C. M.
, and
Angeles
,
J.
,
1989
, “
The Optimum Kinematic Design of a Spherical Three-Degree-of-Freedom Parallel Manipulator
,”
ASME J. Mech. Des.
,
111
(
2
), pp.
202
–
207
.
3.
Gosselin
,
C. M.
,
Sefrioui
,
J.
, and
Richard
,
M. J.
,
1994
, “
On the Direct Kinematics of Spherical Three-Degree-of-Freedom Parallel Manipulators of General Architecture
,”
ASME J. Mech. Des.
,
116
(
2
), pp.
594
–
598
.
4.
Gosselin
,
C. M.
,
Perreault
,
L.
, and
Vaillancourt
,
C.
,
1995
, “
Simulation and Computer-Aided Kinematic Design of Three-Degree-of-Freedom Spherical Parallel Manipulators
,”
J. Rob. Syst.
,
12
(
12
), pp.
857
–
869
.
5.
Alizade
,
R. I.
,
Tagiyiev
,
N. R.
, and
Duffy
,
J.
,
1994
, “
A Forward and Reverse Displacement Analysis of an In-Parallel Spherical Manipulator
,”
Mech. Mach. Theory
,
29
(
1
), pp.
125
–
137
.
6.
Innocenti
,
C.
, and
Parenti-Castelli
,
V.
,
1993
, “
Echelon Form Solution of Direct Kinematics for the General Fully-Parallel Spherical Wrist
,”
Mech. Mach. Theory
,
28
(
4
), pp.
553
–
561
.
7.
Wohlhart
,
K.
,
1994
, “
Displacement Analysis of the General Spherical Stewart Platform
,”
Mech. Mach. Theory
,
29
(
4
), pp.
581
–
589
.
8.
Karouia, M., and Herve´, J. M., 2000, “A Three-dof Tripod for Generating Spherical Rotation,” Advances in Robot Kinematics, Lenarcic, J. and Stanisic, M. M., eds., Kluwer Academic Publishers, Netherlands, pp. 395–402.
9.
Di Gregorio
,
R.
,
2000
, “
A New Parallel Wrist Employing Just Revolute Pairs: The 3-RUU Wrist
,”
Robotica
,
19
(
3
), pp.
305
–
309
.
10.
Di Gregorio
,
R.
,
2001
, “
Kinematics of a new Spherical Parallel Manipulator With Three Equal Legs: The 3-URC Wrist
,”
J. Rob. Syst.
,
18
(
5
), pp.
213
–
219
.
11.
Pierrot, F., and Dombre, E., 1990, “Parallel Structure for Robot Wrist,” Proc. of the 2nd Int. Workshop on Advances in Robot Kinematics, Linz, Austria.
12.
Wiitala
,
J. M.
, and
Stanisic
,
M. M.
,
2000
, “
Design of an Overconstrained and Dexterous Spherical Wrist
,”
ASME J. Mech. Des.
,
122
(
3
), pp.
347
–
353
.
13.
Karouia, M., and Herve´, J. M., 2002, “An Orientational 3-dof Parallel Mechanism,” Proc. of the 3rd Parallel Kinematics Seminar, Chemnitz, Germany, April 23–25, 2002, pp. 139–150.
14.
Karouia, M., and Herve´, J. M., 2002, “A Family of Novel Orientational 3-dof Parallel Robots,” Proc. of RoManSy’14, July 1–4, 2002, Udine, Italy, Springer (2003), pp. 359–368.
15.
Kong, X., and Gosselin, C. M., 2002, “Type Synthesis of 3-DOF Spherical Parallel Manipulators Based on Screw Theory,” Proc. of ASME 2002 Design Engineering Technical Conferences, DETC’02, Montreal, Canada, Paper No. DETC2002/MECH-34259.
16.
Roberson, R. E., and Schwertassek, R., 1988, Dynamics of Multibody Systems, Springer-Verlag Publishers, ISBN 0-387-17447-8, p. 77.
17.
Roth, B., 1993, “Computations in Kinematics,” Computational Kinematics, Angeles, J., Hommel, G., and Kovacs, P., eds., Kluwer Academic Publishers, pp. 3–14.
18.
Di Gregorio
,
R.
, and
Parenti-Castelli
,
V.
,
2001
, “
Position Analysis in Analytical Form of the 3-PSP Mechanism
,”
ASME J. Mech. Des.
,
123
(
1
), pp.
51
–
55
.
Copyright © 2004
 by ASME
You do not currently have access to this content.