We present a numerical method derived from the Impulse-Linear Momentum Principle that can be used in the design of impact tools for rock drilling. This method allows the prediction of energy transmission to rock, the profiles of stress, displacement and velocity, all of which are important in the dynamic analysis of such tools. Using the Impulse-Linear Momentum Principle in an algorithmic manner, multibody interaction is simplified, and also different load and boundary conditions such as external forces, initial strains, and initial body separations can be directly considered. The accuracy of the method has been contrasted theoretically with both one-dimensional and three-dimensional FEM analysis, as well as experimentally.
Issue Section:
Technical Papers
1.
Schunnesson
, H.
, 2000
, “Rock Characterization using Percussive Drilling
,” Int. J. Rock Mech. Min. Sci.
, 35
, pp. 711
–725
.2.
Clark, G. B., 1987, Principles of Rock Fragmentation, John Wiley and Sons, New York.
3.
Hustrulid
, W. A.
, and Fairhurst
, C.
, 1971
, “A Theoretical and Experimental Study of the Percussive Drilling of Rock. Part I: Theory of Percussive Drilling
,” Int. J. Rock Mech. Min. Sci.
, 8
, pp. 311
–333
.4.
Hustrulid
, W. A.
, and Fairhurst
, C.
, 1971
, “A Theoretical and Experimental Study of the Percussive Drilling of Rock. Part II: Force-Penetration and Specific Energy Determinations
,” Int. J. Rock Mech. Min. Sci.
, 8
, pp. 335
–356
.5.
Hustrulid
, W. A.
, and Fairhurst
, C.
, 1972
, “A Theoretical and Experimental Study of the Percussive Drilling of Rock. Part III: Experimental Verification of the Mathematical Theory
,” Int. J. Rock Mech. Min. Sci.
, 9
, pp. 417
–429
.6.
Hustrulid
, W. A.
, and Fairhurst
, C.
, 1972
, “A Theoretical and Experimental Study of the Percussive Drilling of Rock. Part IV: Application of the Model to Actual Percussion Drilling
,” Int. J. Rock Mech. Min. Sci.
, 9
, pp. 431
–449
.7.
Shi
, P.
, 1998, “Simulation of Impact Involving an Elastic Rod,” Computer Methods in Applied Mechanics and Engineering, 151, pp. 497–499.8.
Goldsmith
, W.
, and Wu
, W. Z.
, 1981
, “Response of Rocks to Impact Loading by Bars with Pointed Ends
,” Rock Mech.
, 13
, pp. 157
–184
.9.
Zavarise
, G.
, Wriggers
, P.
, and Schrefler
, B. A.
, 1998
, “A Method for Solving Contact Problems
,” Int. J. Numer. Methods Eng.
, 42
, pp. 473
–498
.10.
Wasfy
, T. M.
, and Noor
, A. K.
, 1997, “Computational Procedure for Simulating the Contact/Impact Response in Flexible Multibody Systems,” Computer Methods in Applied Mechancis and Engineering, 147, pp. 153–166.11.
Hu
, N.
, 1997
, “A Solution Method for Dynamic Contact Problems
,” Comput. Struct.
, 63
, pp. 1053
–1063
.12.
Christensen
, P. W.
, Klarbring
, A.
, Pang
, J. S.
, and Stromberg
, N.
, 1998
, “Formulation and Comparison of Algorithms for Frictional Contact Problems
,” Int. J. Numer. Methods Eng.
, 42
, pp. 145
–173
.13.
Lundberg
, B.
, 1982
, “Microcomputer Simulation of Stress Wave Energy to Rock in Percussive Drilling
,” Int. J. Rock Mech. Min. Sci.
, 19
, pp. 229
–239
.14.
Lundberg
, B.
, 1985
, “Microcomputer Simulation of Percussive Drilling
,” Int. J. Rock Mech. Min. Sci.
, 22
, pp. 237
–249
.15.
Lundberg, B., 1993, “Computer Modeling and Simulation of Percussive Drilling of Rock,” Comprehensive Rock Engineering: Principles, Practice and Projects, J. A. Hudson, ed., Pergamon Press, Oxford, Vol. 4, pp. 137–154.
16.
Karlsson
, L. G.
, Lundberg
, B.
, and Sundin
, K. G.
, 1989
, “Experimental Study of a Percussive Process for Rock Fragmentation
,” Int. J. Rock Mech. Min. Sci.
, 26
, pp. 45
–50
.17.
Streeter, V. L., and Wylie, E. B., 1988, Fluid Mechanics, McGraw-Hill, New York, 1988.
18.
Nordlund
, E.
, 1989
, “The Effect of Thrust on the Performance of Percussive Rock Drills
,” Int. J. Rock Mech. Min. Sci.
, 26
, pp. 51
–59
.19.
Sto¨ck
, M.
, and Schad
, H. P.
, 1992
, “Modelling of Stress Distributions in Rock Drill Heads
,” Int. J. Rock Mech. Min. Sci.
, 29
, pp. 355
–361
.20.
Carlsson
, J.
, Sundin
, K. G.
, and Lundberg
, B.
, 1990
, “A Method for Determination of in-Hole Dynamic Force-Penetration Data from Two-Point Strain Measurement on a Percussive Drill Rod
,” Int. J. Rock Mech. Min. Sci.
, 27
, pp. 553
–558
.21.
Xiaohe, X., Chunan, T., and Dingxiang, Z., 1987, “A Numerical Simulation Model of the Impact Penetration System,” Proceedings, 6th International Congress on Rock Mechanics, G. Herget and S. Vongpaisal, eds., International Society for Rock Mechanics, Montreal, Vol. 1, pp. 743–745.
22.
Stephenson, B. R., 1963, “Measurement of Dynamic Force-Penetration Characteristics in Indiana Limestone,” M.S. thesis, University of Minnesota, USA.
23.
Chiang
, L. E.
, and Elı´as
, D. A.
, 2000
, “Modeling Impact in Down-The-Hole Rock Drilling
,” Int. J. Rock Mech. Min. Sci.
, 37
, pp. 599
–613
.24.
Timoshenko, S. P., and Goodier, J. N., 1970, Theory of Elasticity, McGraw-Hill.
25.
Tan
, X. C.
, Lindqvist
, P. A.
, and Kou
, S. Q.
, 1997
, “Application of a Splitting Fracture Model to the Simulation of Rock Indentation Subsurface Fractures
,” Int. J. Numer. Analyt. Meth. Geomech.
, 21
, pp. 1
–13
.26.
Kou, S. Q., Lindqvist, P. A., and Tan, X. C., 1995, “An Analytical and Experimental Investigation of Rock Indentation Fracture,” Proceedings, 8th International Congress on Rock Mechanics, T. Fuji, ed., International Society for Rock Mechanics, Tokyo, Vol. 1, pp. 181–184.
27.
Shah
, K. R.
, and Wong
, T. F.
, 1997
, “Fracturing at Contact Surfaces Subjected to Normal and Tangential Loads
,” Int. J. Rock Mech. Min. Sci.
, 34
, pp. 727
–739
.28.
Wijk
, G.
, 1989
, “The Stamp Test for Rock Drillability Classification
,” Int. J. Rock Mech. Min. Sci.
, 26
, pp. 37
–44
.29.
Gerstsch, R. E., and Summers, D. A., 1997, “Rock Failure and Failure Processes,” Proceedings, 4th International Symposium on Mine Mechanization and Automation, Brisbane, Australia, pp. A8(9-16).
30.
Lundberg
, B.
, 1974
, “Penetration of Rock by Conical Indenters
,” Int. J. Rock Mech. Min. Sci.
, 11
, pp. 209
–214
.31.
Cook
, N. G.
, Hood
, M.
, and Tsai
, F.
, 1984
, “Observations of Crack Growth in Hard Rock Loaded by an Indenter
,” Int. J. Rock Mech. Min. Sci.
, 21
, pp. 97
–107
.32.
Wang
, J. K.
, and Lehnhoff
, T. F.
, 1976
, “Bit Penetration into Rock. A Finite Element Study
,” Int. J. Rock Mech. Min. Sci.
, 13
, pp. 11
–16
.Copyright © 2003
by ASME
You do not currently have access to this content.
