Three laws of gearing are presented in terms of a three link 1-dof spatial direct contact mechanism. The first law of gearing defines the instantaneous relationship between an infinitesimal displacement of an output body to an infinitesimal angular displacement of an input body for a specified tooth contact normal. A system of cylindroidal coordinates are introduced to facilitate a universal methodology to parameterize the kinematic geometry of generalized motion transmission between skew axes. The second law of gearing establishes a relation between the instantaneous gear ratio and the apparent radii of the hyperboloidal pitch surface in contact as parameterized using a system of cylindroidal coordinates. The third law of gearing establishes an instantaneous relationship for the relative curvature of two conjugate surfaces in direct contact and shows that this relation is independent of the tooth profile geometry. These three laws of gearing along with the system of cylindroidal coordinates establish, in part, a generalized geometric theory comparable to the existing theory for planar kinematics.
Skip Nav Destination
Article navigation
December 2002
Technical Papers
On the Three Laws of Gearing
David B. Dooner
David B. Dooner
Department of Mechanical Engineering, University of Puerto Rico—Mayagu¨ez, Mayagu¨ez, PR 00681-9045
Search for other works by this author on:
David B. Dooner
Department of Mechanical Engineering, University of Puerto Rico—Mayagu¨ez, Mayagu¨ez, PR 00681-9045
Contributed by the Power Transmission and Gearing Committee for publication in the JOURNAL OF MECHANICAL DESIGN. Manuscript received August 2000; revised May 2002. Associate Editor: C. Gosselin.
J. Mech. Des. Dec 2002, 124(4): 733-744 (12 pages)
Published Online: November 26, 2002
Article history
Received:
August 1, 2000
Revised:
May 1, 2002
Online:
November 26, 2002
Citation
Dooner, D. B. (November 26, 2002). "On the Three Laws of Gearing ." ASME. J. Mech. Des. December 2002; 124(4): 733–744. https://doi.org/10.1115/1.1518501
Download citation file:
Get Email Alerts
Related Articles
A Novel Harmonic Drive With Pure Involute Tooth Gear Pair
J. Mech. Des (January,2004)
On Spatial Euler–Savary Equations for Envelopes
J. Mech. Des (August,2007)
Two Basic Features of Instantaneous Conjugate Motion and Their Importance in Facilitating Motion Analysis
J. Mech. Des (January,2004)
Numerical Determination of Cutting Parameters for the Control of Klingelnberg Spiral Bevel Gear Geometry
J. Mech. Des (December,2002)
Related Proceedings Papers
Related Chapters
Backlash
Design and Application of the Worm Gear
Back Matter
Contact in Structural Mechanics: A Weighted Residual Approach
Composing Elements and Kinematics Simulation of Three Gear-Plates Planet Drive with Small Teeth Difference Used in Robot
International Conference on Mechanical and Electrical Technology, 3rd, (ICMET-China 2011), Volumes 1–3