A novel technique for designing curves on surfaces is presented. The design specifications for this technique derive from other works on curvature continuous surface fairing. Briefly stated, the technique must provide a computationally efficient method for the design of surface curves that is applicable to a very general class of surface formulations. It must also provide means to define a smooth natural map relating two or more surface curves. The resulting technique is formulated as a geometric construction that maps a space curve onto a surface curve. It is designed to be coordinate independent and provides isoparametric maps for multiple surface curves. Generality of the formulation is attained by solving a tensorial differential equation formulated in terms of local differential properties of the surfaces. For an implicit surface, the differential equation is solved in three-space. For a parametric surface the tensorial differential equation is solved in the parametric space associated with the surface representation. This technique has been tested on a broad class of examples including polynomials, splines, transcendental parametric and implicit surface representations.

Issue Section:
Research Papers
Topics:
Design, Differential equations, Construction, Polynomials, Splines
1.
Sokolnikoff, J. S., Tensor Analysis, Second edition, John Wiley and Sons, 1951.
2.
Casale, M. S., “The Modeling and Analysis of Sculptured Solids with Trimmed Patches,” Doctoral Dissertation, Department of Mechanical Engineering, University of California, Irvine, Ca, 1989.
3.
Patrikalakis, N. M., and Prakash, P. V., “Surface-To-Surface Intersections for Geometric Modeling,” MITSG 88-8.
4.
Be´zier, P., Private Communications, Feb. 1990.
5.
Hansman, W., “Interaktiver Entwurf Und Geometrische Beschreibung Glatter U¨berga¨nge Zwishen Ra¨umlich Gekru¨mmten Fla¨chenstrukturen,” Doctoral Dissertation, University of Hamburg, 1985.
6.
Barnhill, R. E., and Ou, H. S., “Surfaces defined on surfaces,” Computer Aided Geometric Design, Volume 7, N°1–4, June 1990.
7.
Pegna, J., and Wilde, D. J., “Spherical and Circular Blending of Functional Surfaces,” ASME Transactions, Journal of Offshore Mechanics and Arctic Engineering, March 1990.
8.
Pegna, J., “Variable Sweep Geometric Modeling,” Ph.D. Thesis, Department of Mechanical Engineering, Stanford University, December 1987.
9.
Chandru, V., Dutta, D., Hoffmann, C. M., “Variable Radius Blending Using Dupin Cyclide,” Technical Report CSD-TR-851, CAPO Report CER-89-3, Purdue University, Jan. 1989.
10.
Pegna, J., “Orthogonal Projection Onto Curved Surfaces,” Technical Memo #88-17, Department of Mechanical Engineering, University of California, Irvine, 1988.
11.
Lee, C-K., “Orthogonal Projection as a Tool for Surface Blending,” Master’s Thesis, Department of Mechanical Engineering, University of California, Irvine, Ca, 1990.
12.
Chen, Y. J., and Ravani, B., 1986. “Offset Surface Generation and Contouring in Computer-Aided Design,” Transactions of ASME 86-DET-23.
13.
Rossignac, J. R., 1985. “Blending and Offsetting Solid Models,” PhD Thesis, Department of Electrical Engineering, University of Rochester, Rochester, NY.
14.
Wolter, F-E., “Cut Loci in Bordered and Unbordered Riemannian Manifold,” Doctoral Dissertation, Technischen Universita¨t Berlin, 1985.
15.
Press, W. H., Flannery, B. P., Teukolsky, S. A., and Vetterling, W. T., Numerical Recipes in C., Cambridge University Press, 1988.
16.
Pegna
J.
, and
Wolter
F-E.
, “
Geometrical Criteria to Guarantee Curvature Continuity of Blend Surfaces
,”
ASME Journal of Mechanical Design
, Vol.
114
, March
1992
, pp.
201
–
210
.
17.
Pegna, J., “Interactive Design of Curvature Continuous Fairing Surfaces,” Proceedings of OMAE, The Hague, Netherlands, 1989.
18.
Raj, R. N., “Surface Blending Using Variable Sweep Geometric Modeling,” Master Thesis, Department of Mechanical Engineering, University of California, Irvine, 1990.
19.
Wolter
F.-E.
, and
Tushy
S. T.
, “
Approximation of High-Degree and Procedural Curves
,”
Engineering with Computers
, Vol.
8
, N°.
2
, pp.
61
–
80
.
20.
Wolter, F.-E., “Cut Locus and Medial Axis in Global Shape Interrogation and Representation,” Computer Aided Geometric Design, To appear.
This content is only available via PDF.
Copyright © 1996
 by The American Society of Mechanical Engineers
You do not currently have access to this content.