Skip Nav Destination
Issues
July 2010
ISSN 0094-4289
EISSN 1528-8889
In this Issue
Research Papers
Principles of Nonequal Channel Angular Pressing
J. Eng. Mater. Technol. July 2010, 132(3): 031001.
doi: https://doi.org/10.1115/1.4001261
Stress Whitening Quantification of Thermoformed Mineral Filled Acrylics
J. Eng. Mater. Technol. July 2010, 132(3): 031002.
doi: https://doi.org/10.1115/1.4001262
Topics:
Deformation
,
Stress
,
Temperature
,
Cycles
,
Particulate matter
Graded Coatings on Aluminum Alloy Deposited by the Fluidized Bed (FB) Technique: Film Formation and Mechanical Performance
J. Eng. Mater. Technol. July 2010, 132(3): 031003.
doi: https://doi.org/10.1115/1.4001263
Topics:
Aluminum
,
Coatings
,
Stress
,
Aluminum alloys
,
Fluidized beds
Experimental and Numerical Determination of Limiting Drawing Ratio of Al3105-Polypropylene-Al3105 Sandwich Sheets
J. Eng. Mater. Technol. July 2010, 132(3): 031004.
doi: https://doi.org/10.1115/1.4001264
Topics:
Aluminum
,
Damage
,
Polymers
,
Stress
,
Fracture (Materials)
,
Simulation
,
Finite element analysis
,
Deformation
,
Sandwich structures
Fatigue Behavior of Single Crystal Superalloy Bars Joined by Capacitor Discharge Welding
J. Eng. Mater. Technol. July 2010, 132(3): 031005.
doi: https://doi.org/10.1115/1.4001301
Topics:
Capacitors
,
Crystals
,
Fatigue
,
Superalloys
,
Welding
,
Temperature
,
Charge density waves
,
Mechanical testing
,
Metals
Identification of Process Parameters for Friction Stir Welding Ti–6Al–4V
J. Eng. Mater. Technol. July 2010, 132(3): 031006.
doi: https://doi.org/10.1115/1.4001302
Topics:
Fatigue
,
Friction
,
Titanium
,
Welded joints
,
Welding
,
Temperature
,
Tensile testing
,
Failure
,
Grain size
,
Heat
Local Delamination Buckling of a Laminated Beam due to Three-Point Bending
J. Eng. Mater. Technol. July 2010, 132(3): 031007.
doi: https://doi.org/10.1115/1.4001444
Topics:
Buckling
,
Delamination
,
Fracture (Materials)
,
Stress
,
Deflection
Experimental Characterization of Damage Processes in Aluminum AA2024-O
J. Eng. Mater. Technol. July 2010, 132(3): 031008.
doi: https://doi.org/10.1115/1.4001445
Topics:
Damage
,
Displacement
,
Fracture (Materials)
,
Fracture (Process)
,
Hydrostatics
,
Plasticity
,
Shear (Mechanics)
,
Simulation
,
Stress
,
Tension
Prediction of Elastic-Plastic Boundary Around Cold-Expanded Holes Using Elastic Strain Measurement
J. Eng. Mater. Technol. July 2010, 132(3): 031009.
doi: https://doi.org/10.1115/1.4001591
Topics:
Aluminum
,
Deformation
,
Fatigue life
,
Finite element analysis
,
Strain measurement
,
Stress
,
Strain gages
,
Plasticity
,
Stress concentration
Effect of Phase Transformation on the Wear Behavior of NiTi Alloy
J. Eng. Mater. Technol. July 2010, 132(3): 031010.
doi: https://doi.org/10.1115/1.4001593
Topics:
Alloys
,
Nickel titanium alloys
,
Phase transitions
,
Pseudoelasticity
,
Temperature
,
Testing
,
Wear
,
Wear testing
,
Work hardening
,
Shape memory effects
Polycrystal Plasticity Modeling of Cyclic Residual Stress Relaxation in Shot Peened Martensitic Gear Steel
J. Eng. Mater. Technol. July 2010, 132(3): 031011.
doi: https://doi.org/10.1115/1.4001594
Topics:
Plasticity
,
Relaxation (Physics)
,
Residual stresses
,
Shot peening
,
Steel
,
Stress
,
Gears
,
Crystals
,
Deformation
,
Cycles
Tube Hydroforming of Magnesium Alloys at Elevated Temperatures
J. Eng. Mater. Technol. July 2010, 132(3): 031012.
doi: https://doi.org/10.1115/1.4001833
Topics:
Finite element analysis
,
Flow (Dynamics)
,
Magnesium alloys
,
Pressure
,
Shapes
,
Temperature
,
Deformation
,
Machinery
,
Simulation
Modeling and Simulation of the Failure and Stiffness Degradation of a Graphite Epoxy in a Three Point Bending Test
J. Eng. Mater. Technol. July 2010, 132(3): 031013.
doi: https://doi.org/10.1115/1.3078392
A Numerical and Experimental Investigation on the Fatigue Behavior of a Steel Nitrided Crankshaft for High Power IC Engines
J. Eng. Mater. Technol. July 2010, 132(3): 031014.
doi: https://doi.org/10.1115/1.4001834
Topics:
Fatigue
,
Stress
,
Residual stresses
,
Nitriding
Direct Fabrication of Hierarchical Microstructures on Metals by Means of Direct Laser Interference Patterning
J. Eng. Mater. Technol. July 2010, 132(3): 031015.
doi: https://doi.org/10.1115/1.4001835
Topics:
Aluminum
,
Diffraction gratings
,
Lasers
,
Manufacturing
,
Metals
,
Simulation
,
Stainless steel
,
Titanium
,
Density
,
Temperature
Epoxy Adhesives Modified With Nano- and Microparticles for In Situ Timber Bonding: Effect of Environment on Mechanical Properties and Moisture Uptake
J. Eng. Mater. Technol. July 2010, 132(3): 031016.
doi: https://doi.org/10.1115/1.4001836
Topics:
Adhesives
,
Temperature
,
Tensile strength
,
Timber
,
Epoxy adhesives
,
Water
Technical Briefs
The Relation of the Vickers Hardness With the Loading Stiffness of Instrumented Vickers Indentation of Metal Substrates
J. Eng. Mater. Technol. July 2010, 132(3): 034501.
doi: https://doi.org/10.1115/1.4001300
Topics:
Metals
,
Stiffness
,
Vickers hardness testing
,
Work hardening
Email alerts
RSS Feeds
Evaluation of Machine Learning Models for Predicting the Hot Deformation Flow Stress of Sintered Al–Zn–Mg Alloy
J. Eng. Mater. Technol (April 2025)
Blast Mitigation Using Monolithic Closed-Cell Aluminum Foam
J. Eng. Mater. Technol (April 2025)
Irradiation Damage Evolution Dependence on Misorientation Angle for Σ 5 Grain Boundary of Nb: An Atomistic Simulation-Based Study
J. Eng. Mater. Technol (July 2025)
Influence of Ultrasonic Surface Rolling on the Tensile and Fatigue Properties of Laser-Cladding-Repaired 300M Steel Components
J. Eng. Mater. Technol (April 2025)