Abstract
Viscoelastic composite reinforced with natural fibers is proposed here for the damping treatment of structures for vibration attenuation. The constrained layer damping (CLD) method is found a prominent structural vibration damping method and as a result of the inclusion of natural fiber, substantial damping could be achieved due to the development of shear as well as extensional strains in the viscoelastic material. Finite element analysis of a substrate beam combined with CLD treatment is used to investigate the corresponding improvement in damping. The influence of various geometry of presently considered natural viscoelastic composite layers on the CLD treatment's damping performance has been evaluated and discussed. Damping performances of natural as well as synthetic fibers have been assessed and compared for using natural fibers in viscoelastic composite for various structural applications. The addition of natural fiber has resulted from enhanced damping capacity due to substantial friction at the natural fiber–matrix interface compared to the case of interface with synthetic fiber. Natural fiber attributes less stiffness and a higher loss factor as compared to synthetic fiber and the insertion of stiff fibers affects the polymer chain's movements, decreasing the matrix phase's damping behavior. The dynamic mechanical analysis test is performed to evaluate the damping characteristics in the form of loss factor, storage, and loss modulus over the temperature range from frozen state to melting state.