In this paper, some interesting, experimentally determined actualities referring to the 50CrMo4 steel are presented. That way, the mechanical properties of the material are derived from uniaxial tensile tests at lowered and elevated temperatures. Engineering stress versus strain diagrams for both mentioned temperatures, curves representing the effect of temperature on specimen elongation, and short-time creep curves are given. Notch impact energy test was also carried out. Taking into consideration the service life of the final product of the mentioned steel widely used in engine and machine technology, all of the mentioned data may be relevant during design and manufacturing procedure.
Issue Section:
Research Papers
1.
Rozvany
, G. I. N.
, 1989, Structural Design via Optimality Criteria
, Kluwer Academic
, Dordrecht
.2.
Collins
, J. A.
, 1993, Failure of Materials in Mechanical Design
, Wiley
, New York
.3.
Raghavan
, V.
, 2004, Materials Science and Engineering
, Prentice-Hall of India
, New Delhi
.4.
Findley
, W. N.
, Lai
, J. S.
, and Onaran
, K.
, 1989, Creep and Relaxation of Nonlinear Viscoelastic Materials
, Dover
, New York
.5.
Boresi
, A. P.
, and Schmidt
, R. J.
, 2003, Advance Mechanics of Materials
, Wiley
, New York
.6.
Timmins
, P. F.
, 1997, “Failure Control in Process Operations, ASM Handbook
,” Fatigue and Fracture
, ASM International
, Materials Park, OH
, Vol. 19
, p. 468
.7.
Diot
, S.
, Gavrus
, A.
, Guines
, D.
, and Ragneau
, E.
, 2003, “Identification du Comportement d’un Acier en Compression: du Quasi-Statique au Dynamique: Identification of a Steel Compression Behaviour: From Quasi Static Approach to Dynamic One
,” Mécanique & Industries
, 4
(5
), pp. 519
–524
.8.
Ost
, W.
, De Baets
, P.
, and Van Wittenberghe
, J.
, 2009, “Failure Investigation and Redesign of Piston-and Pump Shafts
,” Eng. Fail. Anal.
,16
(4
), pp. 1174
–1187
.9.
Tsay
, L. W.
, and Lin
, Z. W.
, 1998, “Effect of Laser Beam Radiation on Fatigue Crack Propagation in AISI 4150 Steel
,” Fatigue Fract. Eng. Mater. Struct.
8756-758X, 21
(12
), pp. 1549
–1558
.10.
Badisch
, E.
, and Kirchgaßner
, M.
, 2008, “Influence of Welding Parameters on Microstructure and Wear Behavior of a Typical NiCrBSi Hardfacing Alloy Reinforced With Tungsten Carbide
,” Surf. Coat. Technol.
0257-8972, 202
, pp. 6016
–6022
.11.
Brnić
, J.
, Turkalj
, G.
, Čanađija
, M.
, and Lanc
, D.
, 2009, “Creep Behavior of High-Strength Low-Alloy Steel at Elevated Temperatures
,” Mater. Sci. Eng., A
0921-5093, 499
, pp. 23
–27
.12.
Turkalj
, G.
, Lanc
, D.
, and Brnić
, J.
, 2009, “Large Displacement Analysis of Elastic-Plastic Framed Structures Under Creep Regimes
,” Int. J. Struct. Stab. Dyn.
0219-4554, 9
(1
), pp. 61
–83
.13.
Pepelnjak
, T.
, and Barisic
, B.
, 2009, “Computer-Assisted Engineering Determination of the Formability Limit for Thin Sheet Metals by a Modified Marcinic Method
,” J. Strain Analysis
, 44
, pp. 459
–472
.14.
Papakonstantinou
, C. G.
, and Katakalos
, K.
, 2009, “Mechanical Behavior of High Temperature Hybrid Carbon Fiber/Titanium Laminates
,” ASME J. Eng. Mater. Technol.
0094-4289, 131
, p. 021008
.15.
ISO
, 2000, International Standard ISO 15579:2000, Metalic Materials—Tensile Testing at Low Temperature.16.
2005, Annual Book of ASTM Standards: Metal Test Methods and Analytical Procedures. Vol. 03.01, ASTM International, Baltimore.
17.
Courtney
, T. H.
, 1997, “Fundamental Structure—Property Relationships in Engineering Materials, ASM Handbook
,” Materials and Design
, ASM International
, Materials Park, OH
, Vol. 20
, p. 336
.18.
Shekhter
, A.
, Kim
, S.
, Carr
, D. G.
, Crocker
, A. B. L.
, Ringer
, S. P.
, 2002, “Assesment of Temper Embrittlement in an Ex-Service 1Cr-1Mo-0.25V Power Generating Rotor by Charpy V-Notch Testing, KIc Fracture Toughness and Small Punch Test
,” Int. J. Pressure Vessels Piping
0308-0161, 79
(8–10
), pp. 611
–615
.19.
Roberts
, R.
, and Newton
, C.
, 1981, “Interpretive Report on Small Scale Test Correlations With KIc Data
,” Welding Research Council Bulletins, pp. 1
–18
.Copyright © 2010
by American Society of Mechanical Engineers
You do not currently have access to this content.
