This paper reports the results of theoretical and experimental work leading to the construction of a dedicated finite element method (FEM) system allowing the computer simulation of physical phenomena accompanying the steel sample testing at temperatures that are characteristic for integrated casting and rolling of steel processes, which was equipped with graphical, database oriented pre- and postprocessing. The kernel of the system is a numerical FEM solver based on a coupled thermomechanical model with changing density and mass conservation condition given in analytical form. The system was also equipped with an inverse analysis module having crucial significance for interpretation of results of compression tests at temperatures close to the solidus level. One of the advantages of the solution is the negligible volume loss of the deformation zone due to the analytical form of mass conservation conditions. This prevents FEM variational solution from unintentional specimen volume loss caused by numerical errors, which is inevitable in cases where the condition is written in its numerical form. It is very important for the computer simulation of deformation processes to be running at temperatures characteristic of the last stage of solidification. The still existing density change in mushy steel causes volume changes comparable to those caused by numerical errors. This paper reports work concerning the adaptation of the model to simulation of plastic behavior of axial-symmetrical steel samples subjected to compression at temperature levels higher than $1400°C$. The emphasis is placed on the computer aided testing procedure leading to the determination of mechanical properties of steels at temperatures that are very close to the solidus line. Example results of computer simulation using the developed system are presented as well.

1.
Kang
,
C. G.
, and
Yoon
,
J. H.
, 1997, “
A Finite-Element Analysis on the Upsetting Process of Semi-Solid Aluminum Material
,”
J. Mater. Process. Technol.
0924-0136,
66
, pp.
76
84
.
2.
Koc
,
M.
,
Vazquez
,
V.
,
Witulski
,
T.
, and
Altan
,
T.
, 1996, “
Application of the Finite Element Method to Predict Material Flow and Defects in the Semi-Solid Forging of A356 Aluminum Alloys
,”
J. Mater. Process. Technol.
0924-0136,
59
, pp.
106
112
.
3.
Kopp
,
R.
,
Choi
,
J.
, and
Neudenberger
,
D.
, 2003, “
Simple Compression Test and Simulation of an Sn–15% Pb Alloy in the Semi-Solid State
,”
J. Mater. Process. Technol.
0924-0136,
135
, pp.
317
323
.
4.
Modigell
,
M.
,
Pape
,
L.
, and
Hufschmidt
,
M.
, 2004, “
The Rheological Behaviour of Metallic Suspensions
,”
J. Iron Steel Res. Int.
1006-706X,
75
, pp.
506
512
.
5.
Hufschmidt
,
M.
,
Modigell
,
M.
, and
Petera
,
J.
, 2004, “
Two-Phase Simulations as a Development Tool for Thixoforming Processes
,”
J. Iron Steel Res. Int.
1006-706X,
75
, pp.
513
518
.
6.
Li
,
J.-Y.
,
Sugiyama
,
S.
, and
Yanagimoto
,
J.
, 2005, “
Microstructural Evolution and Flow Stress of Semi-Solid Type 304 Stainless Steel
,”
J. Mater. Process. Technol.
0924-0136,
161
, pp.
396
406
.
7.
Seol
,
D. J.
,
Oh
,
K. Y.
,
Cho
,
J. W.
,
Lee
,
J.-E.
, and
Yoon
,
U.-S.
, 2002, “
Phase-Field Modelling of the Thermo-Mechanical Properties of Carbon Steels
,”
Acta Mater.
1359-6454,
50
(
9
), pp.
2259
2268
.
8.
Seol
,
D. J.
,
Won
,
Y. M.
,
Yeo
,
T.
,
Oh
,
K. H.
,
Park
,
J. K.
, and
Yim
,
C. H.
, 1999, “
High Temperature Deformation Behavior of Carbon Steel in the Austenite and δ-Ferrite Regions
,”
ISIJ Int.
0915-1559,
39
, pp.
91
98
.
9.
Shimahara
,
H.
,
,
R.
,
Kopp
,
R.
, and
Hirt
,
G.
, 2006, “
Investigation of Flow Behaviour and Microstructure on X210CrW12 Steel in Semi-Solid State
,”
Proceedings of the 9th Conference on Semi-Solid Alloys and Composites
, Vol.
116
,
Trans. Tech. Pubn.
,
Busan, Korea
, pp.
189
192
.
10.
Hojny
,
M.
, 2006, “
Mathematical Modelling of Steel Deformation in the Temperature Range Characteristic for the Transformation of State of Aggregation
,” Ph.D. thesis, AGH, Kraków, Poland.
11.
Glowacki
,
M.
, and
Hojny
,
M.
, 2009, “
Inverse Analysis Applied for Determination of Strain-Stress Curves for Steel Deformed in Semi-Solid State
,”
Inverse Probl. Sci. Eng.
1741-5977,
17
, pp.
159
174
.
12.
Mizukami
,
H.
,
Yamanaka
,
A.
, and
Watanabe
,
A.
, 2002, “
Prediction of Density of Carbon Steels
,”
ISIJ Int.
0915-1559,
42
, pp.
375
384
.
13.
Hojny
,
M.
, and
Glowacki
,
M.
, 2008, “
Computer Modelling of Deformation of Steel Samples With Mushy Zone
,”
J. Iron Steel Res. Int.
1006-706X,
79
, pp.
868
874
.