This study presents 2D experimental results and the numerical simulations of thermal loads in order to observe their influences on the life of mechanical systems. The experimental and thermal evolution was measured using several thermocouples and an infrared pyrometer. In fact, the thermal loading was determined by the resolution of an inverse process where the parameters of thermal laws were identified by minimizing the difference between the experimental results and the numerical simulations. After this optimization process, the mechanical modeling by the finite element method was carried out by applying the optimized thermal loading. The laws of elastoviscoplastic behavior are applied in the working temperature range of a continuous casting rollers tool. This modeling constitutes a technological means to choose a type of a coating material and its optimum thickness and to test different thermal loads in order to optimize the industrial process and to improve the tool’s life.
Skip Nav Destination
e-mail: virginie.bogard@univ-reims.fr
Article navigation
April 2007
Technical Papers
Optimization of Thermomechanical Loading by the Inverse Method
Virginie Bogard,
Virginie Bogard
Laboratoire d’Analyse des Contraintes Mécaniques,
e-mail: virginie.bogard@univ-reims.fr
Université de Reims Champagne-Ardenne
, I.U.T Léonard de Vinci, Rue des Crayères, BP1035, 51687 Reims Cedex 2, France
Search for other works by this author on:
Philippe Revel,
Philippe Revel
Laboratoire Roberval (FRE 2833 CNRS), Département de Génie des Systèmes Mécaniques,
Université de Technologie de Compiègne
, Centre de Recherches de Royallieu (P.G), BP-649, 60206 Compiègne cedex, France
Search for other works by this author on:
Yannick Hetet
Yannick Hetet
Laboratoire Roberval (FRE 2833 CNRS), Département de Génie des Systèmes Mécaniques,
Université de Technologie de Compiègne
, Centre de Recherches de Royallieu (P.G), BP-649, 60206 Compiègne cedex, France
Search for other works by this author on:
Virginie Bogard
Laboratoire d’Analyse des Contraintes Mécaniques,
Université de Reims Champagne-Ardenne
, I.U.T Léonard de Vinci, Rue des Crayères, BP1035, 51687 Reims Cedex 2, Francee-mail: virginie.bogard@univ-reims.fr
Philippe Revel
Laboratoire Roberval (FRE 2833 CNRS), Département de Génie des Systèmes Mécaniques,
Université de Technologie de Compiègne
, Centre de Recherches de Royallieu (P.G), BP-649, 60206 Compiègne cedex, France
Yannick Hetet
Laboratoire Roberval (FRE 2833 CNRS), Département de Génie des Systèmes Mécaniques,
Université de Technologie de Compiègne
, Centre de Recherches de Royallieu (P.G), BP-649, 60206 Compiègne cedex, FranceJ. Eng. Mater. Technol. Apr 2007, 129(2): 207-210 (4 pages)
Published Online: June 26, 2006
Article history
Received:
September 11, 2003
Revised:
June 26, 2006
Citation
Bogard, V., Revel, P., and Hetet, Y. (June 26, 2006). "Optimization of Thermomechanical Loading by the Inverse Method." ASME. J. Eng. Mater. Technol. April 2007; 129(2): 207–210. https://doi.org/10.1115/1.2400255
Download citation file:
27
Views
Get Email Alerts
Cited By
Investigating Microstructure and Wear Characteristics of Alloy Steels Used as Wear Plates in Ballast Cleaning Operation in Railways
J. Eng. Mater. Technol (January 2025)
High-Temperature Fatigue of Additively Manufactured Inconel 718: A Short Review
J. Eng. Mater. Technol (January 2025)
Related Articles
Solar Blind Pyrometer Temperature Measurements in High Temperature Solar Thermal Reactors: A Method for Correcting the System-Sensor Cavity Reflection Error
J. Sol. Energy Eng (February,2005)
Thermomechanical Analysis of Solder Joints Under Thermal and Vibrational Loading
J. Electron. Packag (March,2002)
Nonlinear Viscoelastic Finite Element Analysis of Physical Aging in an Encapsulated Transformer
J. Electron. Packag (March,2009)
Time Integration Algorithm for a Cyclic Damage Coupled Thermo-Viscoplasticity Model for 63Sn-37Pb Solder Applications
J. Electron. Packag (March,2004)
Related Proceedings Papers
Related Chapters
Study on Loading Roller Number and Maximum Stress of Roller Bearing used in Rolling Mill Based on FEA
International Conference on Mechanical and Electrical Technology, 3rd, (ICMET-China 2011), Volumes 1–3
Fatigue Analysis in the Connecting Rod of MF285 Tractor by Finite Element Method
International Conference on Advanced Computer Theory and Engineering, 4th (ICACTE 2011)
Computer Aided Design of Tools, Dies, and Moulds (TDMs)
Computer Aided Design and Manufacturing