The theoretical model for the blister test method was used to analyze the interface fracture toughness of zirconia coating deposited on an SUS304 stainless steel substrate by a plasma-spraying method. The elastic parameters of the debonded coating were determined by testing the oil pressure q and maximum deflection w(0). SEM observation, compliance method and ultrasonic detection were used to determine the radius of the debonded coating. The three methods gave the same results for the debonded coating radius. Micro-observations showed that the interfacial crack propagates by the growth of voids or microcracks ahead of the main crack and coalescence with the main crack. The energy release rate with phase angle for type A coating and type B coating was, respectively, and The corresponding interface fracture toughness for type A TBC coating and for type B TBC coating is, respectively, and The stable phase angle was approximately −31.5° and −30.2° for coating A and coating B, respectively.
Determination of Interface Fracture Toughness in Thermal Barrier Coating System by Blister Tests
Contributed by the Materials Division for publication in the JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY. Manuscript received by the Materials Division February 7, 2001; revision received May 29, 2002. Associate Editor: E. P. Busso.
- Views Icon Views
- Share Icon Share
- Cite Icon Cite
- Search Site
Zhou, Y. C., Hashida , T., and Jian, C. Y. (April 4, 2003). "Determination of Interface Fracture Toughness in Thermal Barrier Coating System by Blister Tests ." ASME. J. Eng. Mater. Technol. April 2003; 125(2): 176–182. https://doi.org/10.1115/1.1555658
Download citation file:
- Ris (Zotero)
- Reference Manager