For a perforated sheet with circular holes, used in shadow masks, the diameter of the circular hole varies through the thickness, and the non-uniform circular holes are arranged in a triangular pattern. In order to simplify the analysis, a perforated sheet with equivalent circular holes of uniform diameter is proposed such that its plastic behavior is similar to that with the given non-uniform circular holes. In this study, a yield criterion is discussed for the perforated sheet with uniform circular holes by employing an equivalent continuum approach, which is then applied to examine the plastic deformation of the perforated sheet with non-uniform circular holes. The analytical results predicted by the theory, including those for the apparent yield stresses and strain ratios, are verified by the results obtained from the finite element analysis and also from experiments.
Plastic Deformation of a Perforated Sheet With Non-Uniform Circular Holes Along the Thickness Direction
Contributed by the Materials Division for publication in the JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY. Manuscript received by the Materials Division June 9, 2001; revision received February 3, 2002. Associate Editor: H. M. Zbib.
- Views Icon Views
- Share Icon Share
- Cite Icon Cite
- Search Site
Chen, F., and Lee, Y. (December 31, 2002). "Plastic Deformation of a Perforated Sheet With Non-Uniform Circular Holes Along the Thickness Direction ." ASME. J. Eng. Mater. Technol. January 2003; 125(1): 75–80. https://doi.org/10.1115/1.1526127
Download citation file:
- Ris (Zotero)
- Reference Manager