A micromechanics based failure initiation predictive capability for analyzing notched composite laminates loaded remotely in multiaxial compression is reported. The model relies on the results from a previous experimental study that investigated compression failure mechanisms in special “uniply” composite laminates. The finite element method (FEM) was used in the solution process. The experimental results showed that the dominant mode of failure initiation was kink banding near the hole edge. The kink band was confined in extent to a distance within one half of the hole radius. The fibers within the kink band were rotated both in plane and out of the plane of the laminate. The position of the kink band with respect to the center of the notch depended on the remote biaxial load ration. In the FEM, the region in which kink banding takes place is contained within a finite size rectangular area, and is meshed as an alternatingly stacked region of fiber and matrix layers. The values of boundary loads on this rectangular area which correspond to kink banding is related to the remotely applied loads via an available closed form analysis for orthotropic laminates. Good agreement is found between experiment and analysis for a wide range of notch sizes.

Issue Section:
Technical Papers
Topics:
Composite materials, Failure, Finite element model, Laminates, Micromechanics (Engineering), Stress, Finite element methods, Compression, Fibers, Failure mechanisms
1.
Ashby, M. F., and Jones, D., 1994, Engineering Materials 2, Pergamon.
2.
Matthews, F. L., and Rawlings, R., 1994, Composite Materials: Engineering and Science, Chapman and Hall, London.
3.
Waas
A. M.
, and
Schultheisz
C. R.
,
1995
, “
Compressive Failure in Composites, Part II
,”
Progress in Aerospace Sciences
, Vol.
32
, pp.
43
–
78
.
4.
Starnes, J., Rhodes, M. D., and Williams, J. G., 1979, “Effect of Impact Damage and Holes on the Compressive Strength of a Graphite/Epoxy Laminate,” Nondestructive Evaluation and Flaw Criticality for Composite Materials, R. B. Pipes, ed., ASTM STP 696, pp. 145–171.
5.
Whitney
J.
, and
Nuismer
R.
,
1974
, “
Stress Fracture Criteria for Laminated Composites containing Stress Concentrations
,”
J. Composite Materials
, Vol.
8
, pp.
253
–
265
.
6.
Lagace
P. A.
,
1986
, “
Notch Sensitivity of Graphite/Epoxy Fabric Laminates
,”
Composites Science and Technology
, Vol.
26
, pp.
95
–
117
.
7.
Soni, S., 1980, “Failure Analysis of Composite Laminates with a Fastener Hole,” AFWAL Report TR-80-4010.
8.
Gibson, R., 1994, Principles of Composite Material Mechanics, McGraw Hill.
9.
Kim
J. K.
,
Kim
D. S.
, and
Takeda
N.
,
1995
, “
Notched Strength and Fracture Criterion in Fabric Composite Plates Containing a Circular Hole
,”
J. Composite Materials
, Vol.
29
, pp.
982
–
998
.
10.
Vaidya
R. S.
,
Klug
J. C.
, and
Sun
C. T.
,
1998
, “
Effect of Ply Thickness on Fracture of Notched Composite Laminates
,”
AIAA Journal
, Vol.
36
, No.
1
, pp.
78
–
84
.
11.
Khamseh
A. R.
, and
Waas
A. M.
,
1992
, “
Failure Mechanisms in Uniply Composite Plates under Uniaxial Compression
,”
ASME JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY
, Oct., Vol.
114
, pp.
650
–
659
.
12.
Khamseh
A. R.
, and
Waas
A. M.
,
1997
, “
Failure Mechanisms of Composite Plates with a Circular Hole under remote Biaxial Planar Compressive Loads
,”
ASME JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY
, Vol.
119
, pp.
56
–
64
.
13.
Waas, A., and Babcock, jr., C. D., 1986, “Observation of the Initiation and Progression of Damage in Compressively Loaded Laminated Plates,” GALCIT SM Report 86-34, Caltech Aeronautics Department, Pasadena, CA 91125.
14.
Waas
A. M.
,
Babcock
C. D.
, and
Knauss
W. G.
,
1990
, “
An Experimental Study of Compression Failure of Fibrous Laminates in the Presence of Stress Gradients
,”
Int. J. Solids and Struct.
, Vol.
26
, No.
9/10
, pp.
1071
–
1098
.
15.
Soutis
C.
, and
Fleck
N. A.
,
1990
, “
Static Compression Failure of Carbon Fibre T800/924C Composite Plate with a Single Hole
,”
J. Composite Materials
, Vol.
24
, pp.
536
–
558
.
16.
Lessard
L.
, and
Chang
F. K.
,
1991
, “
Damage Tolerance of Laminated Composites Containing a Open Hole and subjected to Compressive Loading: Part II—Experiment
,”
J. Composite Materials
, Vol.
25
, pp.
44
–
64
.
17.
Soutis
C.
,
Fleck
N.
, and
Smith
F.
,
1991
, “
Failure Prediction Technique for Compression Loaded Carbon Fiber-Epoxy Laminate with an Open Hole
,”
J. Composite Materials
, Vol.
25
, pp.
1476
–
1498
.
18.
Lekhnitskii, S., 1964, Anisotropic Plates, Holden Day, San Francisco.
19.
Kyriakides
S.
,
Arseculeratne
R.
,
Perry
E. J.
, and
Liechti
K. M.
,
1995
, “
On the Compressive Failure of Fiber Reinforced Composites
,”
Int. J Solids Structures
, Vol.
32
, No.
6/7
, pp.
689
–
738
.
20.
Soutis
C.
, and
Turkmen
D.
,
1995
, “
Influence of Shear Properties and Fiber Imperfections on The Compressive Behavior of GFRP Laminates
,”
Appl. Comp. Materials
, Vol.
2
, pp.
327
–
342
.
21.
Riks
E.
,
1972
, “
The Application of Newtons Method to the Problem of Elastic Stability
,”
ASME Journal of Applied Mechanics
, Vol.
39
, pp.
1060
–
1066
.
22.
Budiansky
B.
, and
Fleck
N. A.
,
1993
, “
Compressive Failure of Fiber Composites
,”
J. Mech. Phys. of Solids
, Vol.
41
, No.
1
, pp.
183
–
200
.
23.
Kyriakides, S., and Ruff, A. E., 1996, “Aspects of the failure and post failure of fiber composites in compression,” J. Composite Materials, in press.
24.
Iarve
E.
,
1997
, “
3D Stress Analysis in Laminated Composites with Fasteners Based on the B-Spline Approximation
,”
Composites: A
, Vol.
28A
, pp.
559
–
571
.
25.
Soutis
C.
,
Curtis
P.
, and
Fleck
N.
,
1991
,
Compressive Failure of Notched Carbon Fiber Composites
,
Proc. Royal Soc., London, Series A
, Vol.
440
, pp.
241
–
256
.
26.
Soutis, C., 1997, “The Compressive Behavior of GFRP Laminates,” ASTM STP1242, pp. 168–176.
27.
Soutis
C.
, and
Tenchev
R.
,
1995
, “
A Property Degradation Model for Fiber Microbuckling Failure in Composite Laminates
,”
Sci. and Eng. of Comp. Matls.
, Vol.
4
, pp.
27
–
34
.
28.
Soutis, C., Filou, A., and Pateau, R., 1998, “Strength Prediction of CFRP Plates with a Hole Under Biaxial Compression-Tension,” AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, AIAA CP98-1701, AIAA Headquarters, VA.
This content is only available via PDF.
Copyright © 1999
 by The American Society of Mechanical Engineers
You do not currently have access to this content.