... to characterize mechanical adhesion between active materials with carboxymethylcellulose (CMC) binder and aluminum and copper current collectors, providing information linking laser processing parameters, surface topography, and oxide formation to adhesion. Experiments were performed with a 104-ns pulsed fiber...

[email protected] Email: [email protected] 07 07 2024 30 08 2024 03 09 2024 18 11 2024 Graphical Abstract Figure pulse electrochemical machining (PECM) ultrashort pulse laser surface texturing surface topography precision machining advanced materials...

... interfaces to reveal the effect of the time-varying stagnation point location on surface topographies and residual stress distributions. Shear localization is a dominant mechanism in serrated chip formation in high-speed machining of titanium- and nickel-based components. Compared to continuous chip...

... and cracks under different cutting conditions based on the microscopic surface topography in Fig. 15 and Formula (8) . As illustrated in Fig. 16( a ) , the curled molecular chains were straightened but not broken under the cutting force in dry...

...Chao Liu; Yan He; Yufeng Li; Yulin Wang; Shilong Wang; Yan Wang The residual stresses could affect the ability of components to bear loading conditions and also the performance. The researchers considered workpiece surface as a plane and ignored the effect of surface topography induced...

...Aaron Greco; Steven Raphaelson; Kornel Ehmann; Q. Jane Wang; Chih Lin Modifying the surface topography of tribological interfaces has the potential to improve the friction performance of certain mechanical components that experience sliding contact. Vibromechanical texturing (VMT), an improved...

... ( 50 ± 1 HRc ) with physical vapor deposition (PVD) (Ti, Al) N–TiN-coated end mill was conducted to investigate the optimal surface topography and roughness. A kinematic model of the cutting tool loci was developed to investigate the formation mechanism of the surface texture and correlate...

...Wei-Hong Zhang; Gang Tan; Min Wan; Tong Gao; David Hicham Bassir In milling process, surface topography is a significant factor that affects directly the surface integrity and constitutes a supplement to the form error associated with the workpiece deformation. Based on the tool machining paths...

.../S0890-6955(01)00002-5 , 41 ( 9 ), pp. 1323 – 1345 . machine tools machining motion control precision engineering process control servomechanisms state feedback stiction surface topography precision motion control friction compensation disturbance estimation Kalman filtering...

... for specimens broken at several tested stress levels using optical microscope. 16 03 2006 07 09 2006 fatigue carbon steel bending fractography cantilevers internal stresses shot peening oil jet peening surface topography residual stress fatigue performance Compressive...

... drills are strongly dependent on their geometry, in particular the size of the chip flutes, and the flute surface topography. 31 03 2005 12 04 2006 drilling drilling machines tool steel carbon steel lubrication cutting surface topography deep-hole drilling twist drills...

.... milling cutting mesh generation cutting tools surface topography error analysis iterative methods 07 July 2003 01 March 2004 21 03 2005 Contributed by the Manufacturing Engineering Division for publication in the JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING . Manuscript...

.... Laplace equations surface topography machining machine tools 01 Sep 2002 01 Dec 2003 08 07 2004 Contributed by the Manufacturing Engineering Division for publication in the JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING . Manuscript received Sept. 2002; Revised Dec. 2003...

... AND ENGINEERING . Manuscript received March 2003. Associate Editor: Dong Woo Cho. 01 March 2003 11 11 2003 cutting machining induction heating carbon steel surface topography surface texture Modern manufacturing is characterized by high requirements on accuracy and productivity...

... to compare tool workpiece relative displacements. In the present work, however, the tool workpiece relative displacement is obtained and then coupled with the cutting tool geometry to generate a complete surface topography. Cross-sections of the surface topography are also generated, as a surface roughness...

... cutting surface topography 01 September 2000 01 December 2001 11 07 2002 Contributed by the Manufacturing Engineering Division for publication in the JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING . Manuscript received September 2000; revised December 2001. Associate Editor: S...

... calibration machine tools surface treatment surface topography Part 1 of this paper presented a new methodology for analytically simulating multi-axis machining of complex sculptured surfaces. A generalized approach was developed for representing an arbitrary cutting edge design, and the local...

... SCIENCE AND ENGINEERING . Manuscript received April 2000; Revised April 2001. Associate Editor: T. Kartess. 01 April 2000 01 April 2001 29 04 2002 surface topography position measurement curve fitting polynomial approximation design engineering machine tools Free...

... example is given to show the developed 5-axis flank milling technique based on a type of a 5-axis machine tool. 01 Dec 1999 01 April 2001 machining cutting surface topography manufacturing processes 1 Parametric representation of a ruled surface In cutting ruled...

... for publication in the JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING . Manuscript received Aug. 1998; revised Feb. 2001. Associate Editor: S. Kapoor. grinding surface texture surface topography cutting Fourier transforms rough surfaces Grinding is a widely used machining operation...