Volume 98 Issue 1 | J. Manuf. Sci. Eng.

Skip Nav Destination

Volume 98, Issue 1

February 1976

This article was originally published in

Journal of Engineering for Industry

ISSN 0022-0817

Research Papers

Review of Materials Processing Literature 1971–72—Part 1: Material Removal Practice

G. Boothroyd

J. Eng. Ind. February 1976, 98(1): 1–11. doi: https://doi.org/10.1115/1.3438818

Abstract

View articletitled, Review of Materials Processing Literature 1971–72—Part 1: Material Removal Practice

Open the PDF for in another window

Topics: Materials processing , Engineering teachers , Engineers , Grinding , Manufacturing engineering , Metal cutting , Metals

Review of Materials Processing Literature 1971–72—Part 2: Grinding

S. Malkin

J. Eng. Ind. February 1976, 98(1): 11–19. doi: https://doi.org/10.1115/1.3438803

View articletitled, Review of Materials Processing Literature 1971–72—Part 2: Grinding

Open the PDF for in another window

Topics: Grinding , Materials processing

Review of Materials Processing Literature 1971–72—Part 3: Review of German Language Literature

K. J. Weinmann

J. Eng. Ind. February 1976, 98(1): 19–25. doi: https://doi.org/10.1115/1.3438817

View articletitled, Review of Materials Processing Literature 1971–72—Part 3: Review of German Language Literature

Open the PDF for in another window

Topics: Materials processing

Review of Materials Processing Literature 1971–72—Part 4: Review of Japanese Language Literature, 1972

C. H. Kahng

J. Eng. Ind. February 1976, 98(1): 26–29. doi: https://doi.org/10.1115/1.3438831

View articletitled, Review of Materials Processing Literature 1971–72—Part 4: Review of Japanese Language Literature, 1972

Open the PDF for in another window

Topics: Materials processing

Optimization of a Ribbed Table for Minimum Weight and Minimum Deflection

M. L. Brown

J. Eng. Ind. February 1976, 98(1): 30–33. doi: https://doi.org/10.1115/1.3438839

Abstract

View articletitled, Optimization of a Ribbed Table for Minimum Weight and Minimum Deflection

Open the PDF for in another window

Topics: Deflection , Optimization , Weight (Mass) , Shapes , Machine tools , Mathematics

Initial Curvature and Lateral Load Effects on Thin Struts With Large Elastic Displacements

T. Y. Na, G. M. Kurajian

J. Eng. Ind. February 1976, 98(1): 34–38. doi: https://doi.org/10.1115/1.3438851

Abstract

View articletitled, Initial Curvature and Lateral Load Effects on Thin Struts With Large Elastic Displacements

Open the PDF for in another window

Topics: Stress , Deflection , Design , Struts (Engineering)

Equivalent One-Dimensional System for Analysis of Taper Leaf Springs

N. J. Nigro, S. P. Bhatia

J. Eng. Ind. February 1976, 98(1): 39–42. doi: https://doi.org/10.1115/1.3438865

Abstract

View articletitled, Equivalent One-Dimensional System for Analysis of Taper Leaf Springs

Open the PDF for in another window

Topics: Springs , Distributed parameter systems , Suspension systems

Approximation for Determining Harmonically Excited Response of Nonclassically Damped Systems

D. L. Cronin

J. Eng. Ind. February 1976, 98(1): 43–47. doi: https://doi.org/10.1115/1.3438868

Abstract

View articletitled, Approximation for Determining Harmonically Excited Response of Nonclassically Damped Systems

Open the PDF for in another window

Topics: Approximation , Computation , Damping , Resonance , Stress , Visualization

A Linear Least Squares Method for Describing and Comparing Gently Curved Three-Dimensional Surfaces

H. K. Dietz, J. R. Manning

J. Eng. Ind. February 1976, 98(1): 48–55. doi: https://doi.org/10.1115/1.3438869

Abstract

View articletitled, A Linear Least Squares Method for Describing and Comparing Gently Curved Three-Dimensional Surfaces

Open the PDF for in another window

Topics: Aircraft , Computers , Shapes , Wings

Selection of Operating Parameters in Surface Grinding of Steels

S. Malkin

J. Eng. Ind. February 1976, 98(1): 56–62. doi: https://doi.org/10.1115/1.3438872

Abstract

View articletitled, Selection of Operating Parameters in Surface Grinding of Steels

Open the PDF for in another window

Topics: Grinding , Steel , Grinding wheels , Wheels

Use of Response Surface Methodology to Select a Cutting Tool to Maximize Profit

W. W. Claycombe, W. G. Sullivan

J. Eng. Ind. February 1976, 98(1): 63–65. doi: https://doi.org/10.1115/1.3438873

Abstract

View articletitled, Use of Response Surface Methodology to Select a Cutting Tool to Maximize Profit

Open the PDF for in another window

Topics: Cutting tools , Response surface methodology , Cutting , Optimization

The Formation and Properties of Machining Burrs

L. K. Gillespie, P. T. Blotter

J. Eng. Ind. February 1976, 98(1): 66–74. doi: https://doi.org/10.1115/1.3438875

Abstract

View articletitled, The Formation and Properties of Machining Burrs

Open the PDF for in another window

Topics: Machining , Deformation

Loss Factors and Resonant Frequencies of Periodic Damped Sandwich Plates

D. J. Mead

J. Eng. Ind. February 1976, 98(1): 75–80. doi: https://doi.org/10.1115/1.3438877

Abstract

View articletitled, Loss Factors and Resonant Frequencies of Periodic Damped Sandwich Plates

Open the PDF for in another window

Topics: Plates (structures) , Resonance , Periodic structures , Rivets , Shear (Mechanics) , Stiffness

Instabilities Arising From the Frictional Interaction of a Pin-Disk System Resulting in Noise Generation

S. W. E. Earles, C. K. Lee

J. Eng. Ind. February 1976, 98(1): 81–86. doi: https://doi.org/10.1115/1.3438879

Abstract

View articletitled, Instabilities Arising From the Frictional Interaction of a Pin-Disk System Resulting in Noise Generation

Open the PDF for in another window

Topics: Disks , Noise (Sound) , Steel , Brakes , Cantilevers , Fundamental forces (Physics) , Kinematics , Stiffness

The Stabilizing Capacity of Bearings for Flexible Rotors With Hysteresis

H. F. Black

J. Eng. Ind. February 1976, 98(1): 87–91. doi: https://doi.org/10.1115/1.3438881

Abstract

View articletitled, The Stabilizing Capacity of Bearings for Flexible Rotors With Hysteresis

Open the PDF for in another window

Topics: Bearings , Rotors , Damping , Stability , Coulombs , Internal friction , Stiffness

Dynamic Film Pressure Measurements in Journal Bearings for Use in Rotor Balancing

E. Christensen, J. Tonnesen, J. W. Lund

J. Eng. Ind. February 1976, 98(1): 92–100. doi: https://doi.org/10.1115/1.3438882

Abstract

View articletitled, Dynamic Film Pressure Measurements in Journal Bearings for Use in Rotor Balancing

Open the PDF for in another window

Topics: Journal bearings , Pressure measurement , Rotor balancing , Rotors , Accuracy and precision , Displacement , Membranes , Pressure , Pressure transducers , Probes

Calculation of Acoustical Resonances in Irregular Cavities With Application to Noise-Induced Stress in Expansion Joints

G. Baylac, J. Planchard, J. P. Gregoire, C. Pailly

J. Eng. Ind. February 1976, 98(1): 101–108. doi: https://doi.org/10.1115/1.3438800

Abstract

View articletitled, Calculation of Acoustical Resonances in Irregular Cavities With Application to Noise-Induced Stress in Expansion Joints

Open the PDF for in another window

Topics: Acoustics , Cavities , Expansion joints , Noise (Sound) , Resonance , Stress , Bellows (Equipment) , Computation , Computer software , Flow (Dynamics)

Effect of Pressurization on the Vibration Isolation Capability of Squeeze Film Bearings

S. Simandiri, E. J. Hahn

J. Eng. Ind. February 1976, 98(1): 109–117. doi: https://doi.org/10.1115/1.3438801

Abstract

View articletitled, Effect of Pressurization on the Vibration Isolation Capability of Squeeze Film Bearings

Open the PDF for in another window

Topics: Bearings , Vibration isolation , Rotors , Lubricants , Design , Pressure , Rolling bearings , Vibration , Viscosity , Approximation

Use of a Pragmatic Information Measure as an Aid in the Design of Interactive Graphic Displays

M. R. Corley

J. Eng. Ind. February 1976, 98(1): 118–123. doi: https://doi.org/10.1115/1.3438802

View articletitled, Use of a Pragmatic Information Measure as an Aid in the Design of Interactive Graphic Displays

Open the PDF for in another window

Topics: Design

Design of Semiautomatic Standardizing Machines for Load Cells Testing

Adam Morecki, Wiktor Narkiewicz, M. A. Townsend

J. Eng. Ind. February 1976, 98(1): 124–130. doi: https://doi.org/10.1115/1.3438804

Abstract

View articletitled, Design of Semiautomatic Standardizing Machines for Load Cells Testing

Open the PDF for in another window

Topics: Design , Machinery , Stress , Testing

Plastic Failure of Ductile Beams Loaded Dynamically

Norman Jones

J. Eng. Ind. February 1976, 98(1): 131–136. doi: https://doi.org/10.1115/1.3438805

Abstract

View articletitled, Plastic Failure of Ductile Beams Loaded Dynamically

Open the PDF for in another window

Topics: Failure , Aluminum , Deformation , Die cutting , Shearing (Deformation) , Theoretical methods

Stress Relaxation in Press-Fitted Joints

R. P. Goel

J. Eng. Ind. February 1976, 98(1): 137–140. doi: https://doi.org/10.1115/1.3438806

Abstract

View articletitled, Stress Relaxation in Press-Fitted Joints

Open the PDF for in another window

Topics: Relaxation (Physics) , Stress , Steady state , Geometry , Pins (Engineering) , Printed circuit boards , Wire

The Rupture Strength of Fully Annealed, Metallic Spherical-Cap Diaphragms

J. G. Beese

J. Eng. Ind. February 1976, 98(1): 141–144. doi: https://doi.org/10.1115/1.3438807

Abstract

View articletitled, The Rupture Strength of Fully Annealed, Metallic Spherical-Cap Diaphragms

Open the PDF for in another window

Topics: Diaphragms (Mechanical devices) , Diaphragms (Structural) , Rupture , Disks , Hydrostatic pressure , Pressure , Safety

Inception of Cavitation From a Solid Surface

G. E. Miller, H. G. Rylander

J. Eng. Ind. February 1976, 98(1): 145–152. doi: https://doi.org/10.1115/1.3438808

Abstract

View articletitled, Inception of Cavitation From a Solid Surface

Open the PDF for in another window

Topics: Cavitation , Pressure , Steel , Tension , Acoustics , Algebra , Algorithms , Bubbles , Design , Dimensions

Combined Axial Stress Fatigue Reliability for AISI 4130 and 4340 Steels

D. B. Kececioglu, L. B. Chester

J. Eng. Ind. February 1976, 98(1): 153–160. doi: https://doi.org/10.1115/1.3438809

Abstract

View articletitled, Combined Axial Stress Fatigue Reliability for AISI 4130 and 4340 Steels

Open the PDF for in another window

Topics: Fatigue , Reliability , Steel , Stress , Design , Cycles , Failure

An Analysis of Epitrochoidal Profiles With Constant Difference Modification Suitable for Rotary Expanders and Pumps

F. J. Robinson, J. R. Lyon

J. Eng. Ind. February 1976, 98(1): 161–165. doi: https://doi.org/10.1115/1.3438810

Abstract

View articletitled, An Analysis of Epitrochoidal Profiles With Constant Difference Modification Suitable for Rotary Expanders and Pumps

Open the PDF for in another window

Topics: Pumps , Machinery , Computer software

Bending and Vibration of Plates of Variable Thickness

S. S. H. Chen

J. Eng. Ind. February 1976, 98(1): 166–170. doi: https://doi.org/10.1115/1.3438811

Abstract

View articletitled, Bending and Vibration of Plates of Variable Thickness

Open the PDF for in another window

Topics: Plates (structures) , Vibration , Boundary-value problems , Deflection , Shapes , Clamps (Tools)

The Design of Variable Antidive Vehicle Suspension Systems

D. Metz, A. Carlson, L. Golden, R. Owen

J. Eng. Ind. February 1976, 98(1): 171–175. doi: https://doi.org/10.1115/1.3438812

Abstract

View articletitled, The Design of Variable Antidive Vehicle Suspension Systems

Open the PDF for in another window

Topics: Design , Suspension systems , Vehicles

Elimination of the Branch Problem in Graphical Burmester Mechanism Synthesis for Four Finitely Separated Positions

K. J. Waldron

J. Eng. Ind. February 1976, 98(1): 176–182. doi: https://doi.org/10.1115/1.3438813

Abstract

View articletitled, Elimination of the Branch Problem in Graphical Burmester Mechanism Synthesis for Four Finitely Separated Positions

Open the PDF for in another window

Topics: Construction , Design , Linkages

A Simulation Method of Establishing Fatigue Life Distribution

H. A. Elmaraghy, J. N. Siddall

J. Eng. Ind. February 1976, 98(1): 183–188. doi: https://doi.org/10.1115/1.3438814

Abstract

View articletitled, A Simulation Method of Establishing Fatigue Life Distribution

Open the PDF for in another window

Topics: Fatigue life , Simulation , Chaos , Stress , Materials properties , Computer simulation , Computers , Design , Endurance limit , Failure

An Evaluation of Grinding Performance for Single and Polycrystal Grit Aluminum-Oxide Grinding Wheels

James A. Kirk

J. Eng. Ind. February 1976, 98(1): 189–195. doi: https://doi.org/10.1115/1.3438815

Abstract

View articletitled, An Evaluation of Grinding Performance for Single and Polycrystal Grit Aluminum-Oxide Grinding Wheels

Open the PDF for in another window

Topics: Aluminum , Grinding , Grinding wheels , Wear , Composite materials , Cutting , Damage , Scanning electron microscopes , Wheels

Effect of Nonuniform Residual Bending Stresses on Postleveled Sheet Flatness

Y. W. Hsu

J. Eng. Ind. February 1976, 98(1): 196–200. doi: https://doi.org/10.1115/1.3438816

Abstract

View articletitled, Effect of Nonuniform Residual Bending Stresses on Postleveled Sheet Flatness

Open the PDF for in another window

Topics: Bending (Stress) , Alloys , Inspection , Mathematical analysis , Work hardening

Drawing Solid Wires Through Soft Dies in Antiquity

E. G. Thomsen, H. H. Thomsen

J. Eng. Ind. February 1976, 98(1): 201–205. doi: https://doi.org/10.1115/1.3438819

Abstract

View articletitled, Drawing Solid Wires Through Soft Dies in Antiquity

Open the PDF for in another window

Topics: Wire , Metals , Silver

Brittle Fracture Under a Complex State of Stress

M. C. Shaw

J. Eng. Ind. February 1976, 98(1): 206–210. doi: https://doi.org/10.1115/1.3438820

Abstract

View articletitled, Brittle Fracture Under a Complex State of Stress

Open the PDF for in another window

Topics: Brittle fracture , Stress , Fracture (Materials) , Fracture (Process) , Hydrostatics , Size effect , Tension , Torsion , Tungsten

Some Considerations on the Formability Parameter in Sheet-Metal Forming

N. Kawai, M. Gotoh, Y. Kurosaki

J. Eng. Ind. February 1976, 98(1): 211–216. doi: https://doi.org/10.1115/1.3438821

Abstract

View articletitled, Some Considerations on the Formability Parameter in Sheet-Metal Forming

Open the PDF for in another window

Topics: Fracture (Materials) , Fracture (Process) , Load bearing capacity , Sheet metal , Sheet metal work , Theoretical analysis

Maximum Rate of Profit Criteria in Machining

G. Boothroyd, P. Rusek

J. Eng. Ind. February 1976, 98(1): 217–220. doi: https://doi.org/10.1115/1.3438822

View articletitled, Maximum Rate of Profit Criteria in Machining

Open the PDF for in another window

Topics: Machining

An Analysis of Tool Life Based on Flank-Face Wear—Part 1: Theory

C. Rubenstein

J. Eng. Ind. February 1976, 98(1): 221–226. doi: https://doi.org/10.1115/1.3438823

Abstract

View articletitled, An Analysis of Tool Life Based on Flank-Face Wear—Part 1: Theory

Open the PDF for in another window

Topics: Wear , Cutting tools , Adhesion , Cracking (Materials) , Cutting , Failure , Fracture (Process) , Temperature

An Analysis of Tool Life Based on Flank-Face Wear—Part 2: Comparison of Theory With Experimental Observations

C. Rubenstein

J. Eng. Ind. February 1976, 98(1): 227–232. doi: https://doi.org/10.1115/1.3438824

Abstract

View articletitled, An Analysis of Tool Life Based on Flank-Face Wear—Part 2: Comparison of Theory With Experimental Observations

Open the PDF for in another window

Topics: Wear , Temperature , Cutting

The Effect of Chucking Methods on Roundness Error in the Boring Process

C. H. Kahng, H. W. Lord, T. L. Davis

J. Eng. Ind. February 1976, 98(1): 233–238. doi: https://doi.org/10.1115/1.3438825

Abstract

View articletitled, The Effect of Chucking Methods on Roundness Error in the Boring Process

Open the PDF for in another window

Topics: Errors , Deformation

Experiments on Adaptive Control of a Milling Machine

R. Bedini, G. G. Lisini, P. C. Pinotti

J. Eng. Ind. February 1976, 98(1): 239–245. doi: https://doi.org/10.1115/1.3438826

Abstract

View articletitled, Experiments on Adaptive Control of a Milling Machine

Open the PDF for in another window

Topics: Adaptive control , Milling machines , Computers , Control equipment , Cutting , Metal cutting , Transients (Dynamics)

Investigation of the Flank Wear of Cemented Carbide Tools

E. Lenz, Z. Katz, A. Ber

J. Eng. Ind. February 1976, 98(1): 246–250. doi: https://doi.org/10.1115/1.3438827

View articletitled, Investigation of the Flank Wear of Cemented Carbide Tools

Open the PDF for in another window

Topics: Carbide cutting tools , Wear

Analytical Investigation of the Effect of Tool Wear on the Temperature Variations in a Metal Cutting Tool

E. K. Levy, C. L. Tsai, M. P. Groover

J. Eng. Ind. February 1976, 98(1): 251–257. doi: https://doi.org/10.1115/1.3438828

Abstract

View articletitled, Analytical Investigation of the Effect of Tool Wear on the Temperature Variations in a Metal Cutting Tool

Open the PDF for in another window

Topics: Metal cutting , Temperature , Wear , Thermocouples , Sensors , Transients (Dynamics) , Cutting

Metal Cutting Dynamics With Reference to Primary Chatter

Richard J. Szakovits, A. F. D’Souza

J. Eng. Ind. February 1976, 98(1): 258–264. doi: https://doi.org/10.1115/1.3438829

Abstract

View articletitled, Metal Cutting Dynamics With Reference to Primary Chatter

Open the PDF for in another window

Topics: Chatter , Dynamics (Mechanics) , Metal cutting , Oscillations , Cutting , Limit cycles , Simulation , Thrust , Waves

Analysis of the Radial Forging Process for Manufacturing Rods and Tubes

G. D. Lahoti, T. Altan

J. Eng. Ind. February 1976, 98(1): 265–271. doi: https://doi.org/10.1115/1.3438830

Abstract

View articletitled, Analysis of the Radial Forging Process for Manufacturing Rods and Tubes

Open the PDF for in another window

Topics: Forging , Manufacturing , Rods , Stress , Temperature , Flow (Dynamics) , Slabs

Necessary Conditions for Ductile Flow of a Tensile Composite Rod

S. Iscovici, B. Avitzur

J. Eng. Ind. February 1976, 98(1): 272–278. doi: https://doi.org/10.1115/1.3438832

Abstract

View articletitled, Necessary Conditions for Ductile Flow of a Tensile Composite Rod

Open the PDF for in another window

Topics: Composite materials , Flow (Dynamics) , Particulate matter , Deformation , Algorithms , External pressure , Pressure , Testing

Metal Oxycarbides as Cutting Tool Materials

W. W. Carson, C. L. Leung, N. P. Suh

J. Eng. Ind. February 1976, 98(1): 279–286. doi: https://doi.org/10.1115/1.3438833

Abstract

View articletitled, Metal Oxycarbides as Cutting Tool Materials

Open the PDF for in another window

Topics: Cutting tools , Metals , Wear , Chemical stability , Cutting , Carbide cutting tools , Diffusion (Physics) , Sputtering (Irradiation) , Steel , Titanium

Effects of Built-Up Edge in Drilling

A. G. Dolodarenko, I. Ham

J. Eng. Ind. February 1976, 98(1): 287–292. doi: https://doi.org/10.1115/1.3438834

Abstract

View articletitled, Effects of Built-Up Edge in Drilling

Open the PDF for in another window

Topics: Drilling , Cutting , Drilling mechanics , Drills (Tools) , Flow (Dynamics)

Wind-Powered Electric Utility Plants

T. S. Jayadev, R. T. Smith

J. Eng. Ind. February 1976, 98(1): 293–296. doi: https://doi.org/10.1115/1.3438835

Abstract

View articletitled, Wind-Powered Electric Utility Plants

Open the PDF for in another window

Topics: Wind power , Wind , Energy generation , Spectra (Spectroscopy)

A Program to Control the Hazard of the Dust From Cotton

D. W. Lyons, J. D. Hatcher

J. Eng. Ind. February 1976, 98(1): 297–300. doi: https://doi.org/10.1115/1.3438836

View articletitled, A Program to Control the Hazard of the Dust From Cotton

Open the PDF for in another window

Topics: Dust , Hazards

In-Process Analysis of Machine Tool Structure Dynamics and Prediction of Machining Chatter

Toshimichi Moriwaki, Kazuaki Iwata

J. Eng. Ind. February 1976, 98(1): 301–305. doi: https://doi.org/10.1115/1.3438837

Abstract

View articletitled, In-Process Analysis of Machine Tool Structure Dynamics and Prediction of Machining Chatter

Open the PDF for in another window

Topics: Chatter , Dynamics (Mechanics) , Machine tools , Cutting , Stability , Dynamometers , Machining , Shear (Mechanics) , Theoretical analysis , Time series

Dynamics of a Power Collector With Friction Dampers

K. Yoshida, T. Shimogo

J. Eng. Ind. February 1976, 98(1): 306–311. doi: https://doi.org/10.1115/1.3438838

Abstract

View articletitled, Dynamics of a Power Collector With Friction Dampers

Open the PDF for in another window

Topics: Dampers , Dynamics (Mechanics) , Friction , Coulombs , Construction , High speed rail , Linearization techniques , Probability , Rails

A Modal Transient Simulation Model for Flexible Asymmetric Rotors

D. W. Childs

J. Eng. Ind. February 1976, 98(1): 312–319. doi: https://doi.org/10.1115/1.3438840

Abstract

View articletitled, A Modal Transient Simulation Model for Flexible Asymmetric Rotors

Open the PDF for in another window

Topics: Rotors , Simulation models , Transients (Dynamics) , Stiffness , Deflection , Dimensions , Engineering simulation , Poles (Building) , Simulation

Application of the Optimal Preview Control Theory to the Vibration Reduction of the Elastic Beam under Moving Load

M. Sasaki, T. Shimogo

J. Eng. Ind. February 1976, 98(1): 320–326. doi: https://doi.org/10.1115/1.3438841

Abstract

View articletitled, Application of the Optimal Preview Control Theory to the Vibration Reduction of the Elastic Beam under Moving Load

Open the PDF for in another window

Topics: Control theory , Pavement live loads , Vibration , Concretes , Control equipment , Deflection , Filters , Integral equations , Simply supported beams , Stress

Vibration of an Asymmetrically Mounted Rotor With Gyroscopic Effects

D. Ardayfio, D. A. Frohrib

J. Eng. Ind. February 1976, 98(1): 327–331. doi: https://doi.org/10.1115/1.3438842

Abstract

View articletitled, Vibration of an Asymmetrically Mounted Rotor With Gyroscopic Effects

Open the PDF for in another window

Topics: Rotors , Vibration , Equations of motion , Inertia (Mechanics)

Stress Concentration Factors From Overlapping Stress Fields in Uniaxial Tension

H. T. Gencsoy, J. F. Hamilton, C. C. Yang

J. Eng. Ind. February 1976, 98(1): 332–339. doi: https://doi.org/10.1115/1.3438843

Abstract

View articletitled, Stress Concentration Factors From Overlapping Stress Fields in Uniaxial Tension

Open the PDF for in another window

Topics: Stress , Stress concentration , Tension , Manual transmissions

V-Belt Life Prediction and Power Rating

L. R. Oliver, C. O. Johnson, W. F. Breig

J. Eng. Ind. February 1976, 98(1): 340–347. doi: https://doi.org/10.1115/1.3438844

Abstract

View articletitled, V-Belt Life Prediction and Power Rating

Open the PDF for in another window

Topics: V-belts , Bending (Stress) , Design , Fatigue , Finite element analysis , Fourier series , Life testing , Service life (Equipment) , Stress , Stress concentration

Estimation of Cumulative Fatigue Damage Under Random Loading

A. K. Abu-Akeel

J. Eng. Ind. February 1976, 98(1): 348–353. doi: https://doi.org/10.1115/1.3438849

Abstract

View articletitled, Estimation of Cumulative Fatigue Damage Under Random Loading

Open the PDF for in another window

Topics: Fatigue damage , Stress , Computation , Computers , Damage , Errors , Spectral energy distribution , Structural elements (Construction)

Determination of Optimum Machining Conditions—Deterministic and Probabilistic Approaches

S. K. Hati, S. S. Rao

J. Eng. Ind. February 1976, 98(1): 354–359. doi: https://doi.org/10.1115/1.3438853

Abstract

View articletitled, Determination of Optimum Machining Conditions—Deterministic and Probabilistic Approaches

Open the PDF for in another window

Topics: Machining , Cutting , Optimization , Sensitivity analysis

Investigation on the Role of Workpiece Grain Size in Electrochemical Machining Process

L. Kops, V. B. Quach

J. Eng. Ind. February 1976, 98(1): 360–368. doi: https://doi.org/10.1115/1.3438855

Abstract

View articletitled, Investigation on the Role of Workpiece Grain Size in Electrochemical Machining Process

Open the PDF for in another window

Topics: Grain size , Machining , Grain boundaries , Electrolytes , Flow (Dynamics) , Ions , Anodes , Atoms , Current density , Diffusion (Physics)

Design Coefficients for Rings Loaded Out-of-Plane

J. L. Houtman

J. Eng. Ind. February 1976, 98(1): 369–374. doi: https://doi.org/10.1115/1.3438857

Abstract

View articletitled, Design Coefficients for Rings Loaded Out-of-Plane

Open the PDF for in another window

Topics: Deflection , Design , Stiffness

Displacement of a Ring Subject to Uniform Radial Loads

A. K. Naghdi

J. Eng. Ind. February 1976, 98(1): 375–380. doi: https://doi.org/10.1115/1.3438859

Abstract

View articletitled, Displacement of a Ring Subject to Uniform Radial Loads

Open the PDF for in another window

Topics: Displacement , Stress , Cross section (Physics) , Elasticity , Corners (Structural elements) , Fourier series , Heating , Machine components , Symmetry (Physics) , Wheels