Skip Nav Destination
Issues
April 2015
ISSN 1087-1357
EISSN 1528-8935
In this Issue
Editorial
A Tribute to Four Outstanding Associate Editors
J. Manuf. Sci. Eng. April 2015, 137(2): 020201.
doi: https://doi.org/10.1115/1.4029889
Research Papers
Dynamic Model of Consumable Double-Electrode Submerged Arc Welding Process
J. Manuf. Sci. Eng. April 2015, 137(2): 021001.
doi: https://doi.org/10.1115/1.4025580
Topics:
Arc welding
,
Dynamic models
,
Electrodes
,
Gas metal arc welding
,
Wire
,
Welding
Influence of the Thermoplastic Type on the Thermal Evolution of a Piezoceramic Patch During the Manufacture of a Smart Thermoplastic Part by Injection Molding Process
J. Manuf. Sci. Eng. April 2015, 137(2): 021002.
doi: https://doi.org/10.1115/1.4029092
Topics:
Temperature
,
Specific heat
,
Thermal conductivity
,
Injection molding
Prediction of Edge Crack in Cold Rolling of Silicon Steel Strip Based on an Extended Gurson–Tvergaard–Needleman Damage Model
J. Manuf. Sci. Eng. April 2015, 137(2): 021003.
doi: https://doi.org/10.1115/1.4028827
Topics:
Cold rolling
,
Damage
,
Fracture (Materials)
,
Strips
,
Silicon steel
,
Shear (Mechanics)
Efficient Design-Optimization of Variable-Density Hexagonal Cellular Structure by Additive Manufacturing: Theory and Validation
J. Manuf. Sci. Eng. April 2015, 137(2): 021004.
doi: https://doi.org/10.1115/1.4028724
Topics:
Density
,
Design
,
Finite element analysis
,
Optimization
,
Topology
,
Additive manufacturing
Development of a Low-Cost Parallel Kinematic Machine for Multidirectional Additive Manufacturing
J. Manuf. Sci. Eng. April 2015, 137(2): 021005.
doi: https://doi.org/10.1115/1.4028897
Topics:
Additive manufacturing
,
Calibration
,
Design
,
Engineering prototypes
,
Hardware
,
Kinematics
,
Machinery
,
Path planning
,
Computer software
,
Manufacturing
Mask-Less Electrochemical Additive Manufacturing: A Feasibility Study
J. Manuf. Sci. Eng. April 2015, 137(2): 021006.
doi: https://doi.org/10.1115/1.4029022
Online Eccentricity Monitoring of Seamless Tubes in Cross-Roll Piercing Mill
J. Manuf. Sci. Eng. April 2015, 137(2): 021007.
doi: https://doi.org/10.1115/1.4028440
Topics:
Feature selection
,
Quality control charts
,
Vibration
,
Wall thickness
,
Signals
Modeling of Material Removal Rate in Vibration Assisted Nano Impact-Machining by Loose Abrasives
J. Manuf. Sci. Eng. April 2015, 137(2): 021008.
doi: https://doi.org/10.1115/1.4028199
Topics:
Abrasives
,
Machining
,
Modeling
,
Vibration
,
Particulate matter
,
Silicon
,
Borosilicate glasses
,
Heat resistant glass
,
Brittleness
,
Atomic force microscopy
An Enhanced Microstructure-Level Finite Element Machining Model for Carbon Nanotube-Polymer Composites
J. Manuf. Sci. Eng. April 2015, 137(2): 021009.
doi: https://doi.org/10.1115/1.4028200
Topics:
Carbon nanotubes
,
Composite materials
,
Damage
,
Machining
,
Stress
,
Polymers
,
Cutting
,
Temperature
Selective Laser Melting Additive Manufacturing of Novel Aluminum Based Composites With Multiple Reinforcing Phases
J. Manuf. Sci. Eng. April 2015, 137(2): 021010.
doi: https://doi.org/10.1115/1.4028925
Topics:
Aluminum
,
Composite materials
,
Lasers
,
Particulate matter
,
Wear
,
Melting
,
Density
,
Additive manufacturing
,
Mechanical properties
Understanding the Effect of Heat Input and Sheet Gap on Porosity Formation in Fillet Edge and Flange Couch Laser Welding of AC-170PX Aluminum Alloy for Automotive Component Manufacture
J. Manuf. Sci. Eng. April 2015, 137(2): 021011.
doi: https://doi.org/10.1115/1.4028900
Topics:
Flanges
,
Laser welding
,
Porosity
,
Welding
,
Aluminum alloys
,
Microhardness
,
Aluminum
,
Heat
,
Lasers
Toward the Control of the EP3D Printed Surface
J. Manuf. Sci. Eng. April 2015, 137(2): 021012.
doi: https://doi.org/10.1115/1.4029184
Topics:
Belts
,
Feedback
,
Imaging
,
Printing
,
Particulate matter
,
Additive manufacturing
,
Testing
Formulation of Influence of Machine Geometric Errors on Five-Axis On-Machine Scanning Measurement by Using a Laser Displacement Sensor
J. Manuf. Sci. Eng. April 2015, 137(2): 021013.
doi: https://doi.org/10.1115/1.4029183
Topics:
Errors
,
Lasers
,
Machinery
,
Sensors
,
Displacement
,
Calibration
A Predictive Model for Temperature Rise of Spindle–Bearing Integrated System
J. Manuf. Sci. Eng. April 2015, 137(2): 021014.
doi: https://doi.org/10.1115/1.4029445
Topics:
Bearings
,
Heat
,
Integrated systems
,
Temperature
,
Finite element model
,
Finite element methods
Manufacturability Feedback and Model Correction for Additive Manufacturing
J. Manuf. Sci. Eng. April 2015, 137(2): 021015.
doi: https://doi.org/10.1115/1.4029374
Topics:
Additive manufacturing
,
Printing
,
Resolution (Optics)
,
Shapes
,
Feedback
,
Computation
,
Errors
A General Method for the Dynamic Modeling of Ball Bearing–Rotor Systems
J. Manuf. Sci. Eng. April 2015, 137(2): 021016.
doi: https://doi.org/10.1115/1.4029312
Topics:
Bearings
,
Rotors
,
Ball bearings
,
Vibration
Electrical Discharge Grinding of Polycrystalline Diamond—Effect of Machining Parameters and Finishing In-Feed
J. Manuf. Sci. Eng. April 2015, 137(2): 021017.
doi: https://doi.org/10.1115/1.4029433
Topics:
Diamonds
,
Finishing
,
Grinding
,
Machining
,
Stress
,
Thermal stresses
,
Cobalt
,
Temperature
Investigations on the Application of Elastomagnetic Abrasive Balls for Fine Finishing
J. Manuf. Sci. Eng. April 2015, 137(2): 021018.
doi: https://doi.org/10.1115/1.4029375
Topics:
Finishing
,
Cutting
,
Magnetic fields
Rapid Computation of Statistically Stable Particle/Feature Ratios for Consistent Substrate Stresses in Printed Flexible Electronics
J. Manuf. Sci. Eng. April 2015, 137(2): 021019.
doi: https://doi.org/10.1115/1.4029327
Topics:
Particulate matter
,
Stress
,
Flexible electronics
,
Computation
Microstructure Effects on Cutting Forces and Flow Stress in Ultra-Precision Machining of Polycrystalline Brittle Materials
J. Manuf. Sci. Eng. April 2015, 137(2): 021020.
doi: https://doi.org/10.1115/1.4029648
Topics:
Cutting
,
Flow (Dynamics)
,
Grain boundaries
,
Grain size
,
Machining
,
Stress
,
Thrust
,
Modeling
,
Brittleness
Correlation of the Volumetric Tool Wear Rate of Carbide Milling Inserts With the Material Removal Rate of Ti–6Al–4V
J. Manuf. Sci. Eng. April 2015, 137(2): 021021.
doi: https://doi.org/10.1115/1.4029649
Technical Brief
Harmonic Differential Quadrature Method for Surface Location Error Prediction and Machining Parameter Optimization in Milling
J. Manuf. Sci. Eng. April 2015, 137(2): 024501.
doi: https://doi.org/10.1115/1.4028279
Topics:
Errors
,
Machining
,
Milling
,
Optimization
,
Solid-liquid equilibrium
On Cutting Temperature Measurement During Titanium Machining With an Atomization-Based Cutting Fluid Spray System
J. Manuf. Sci. Eng. April 2015, 137(2): 024502.
doi: https://doi.org/10.1115/1.4028898
Topics:
Cutting
,
Fluids
,
Machining
,
Sprays
,
Temperature
,
Temperature measurement
,
Thermocouples
,
Titanium
,
Cooling
,
Floods
Energy, Torque, and Dynamics in Impact Wrench Tightening
J. Manuf. Sci. Eng. April 2015, 137(2): 024503.
doi: https://doi.org/10.1115/1.4028750
Electric Field-Assisted Additive Manufacturing Polyaniline Based Composites for Thermoelectric Energy Conversion
J. Manuf. Sci. Eng. April 2015, 137(2): 024504.
doi: https://doi.org/10.1115/1.4029398
Topics:
Additive manufacturing
,
Composite materials
,
Energy conversion
,
Nanotubes
,
Nanoparticles
,
Casting
,
Polymers
Email alerts
RSS Feeds
Numerical Study of Temperature Evolution During Friction Element Welding
J. Manuf. Sci. Eng
Smoothed Particle Hydrodynamics Modeling of Thermal Barrier Coating Removal Process Using Abrasive Water Jet Technique
J. Manuf. Sci. Eng (September 2022)
Compensation of Thermally Induced Errors in Five-Axis Computer Numerical Control Machining Centers Equipped With Different Spindles
J. Manuf. Sci. Eng (October 2022)
