Journal of Manufacturing Science and Engineering

Topics: Glass , Lasers , Simulation , Thin films , Stress , Thermal stresses , Explosions , Fluence (Radiation measurement) , Plasmas (Ionized gases) , Temperature

On the Development of an Experimental Testing Platform for the Vortex Machining Process

Stephen C. Howard, Jacob W. Chesna, Stuart T. Smith, Brigid A. Mullany

J. Manuf. Sci. Eng. October 2013, 135(5): 051005. doi: https://doi.org/10.1115/1.4025011

Abstract

View articletitled, On the Development of an Experimental Testing Platform for the Vortex Machining Process

Open the PDF for in another window

Topics: Machining , Probes , Slurries , Testing , Vortices , Metrology , Sensors

Characterization of Fluid Film Produced by an Atomization-Based Cutting Fluid Spray System During Machining

Alexander C. Hoyne, Chandra Nath, Shiv G. Kapoor

J. Manuf. Sci. Eng. October 2013, 135(5): 051006. doi: https://doi.org/10.1115/1.4025012

Abstract

View articletitled, Characterization of Fluid Film Produced by an Atomization-Based Cutting Fluid Spray System During Machining

Open the PDF for in another window

Topics: Cutting , Drops , Film thickness , Fluid films , Fluids , Machining , Sprays , Momentum

Curing-Induced Distortion Mechanism in Adhesive Bonding of Aluminum AA6061-T6 and Steels

XiaoBo Zhu, YongBing Li, GuanLong Chen, Pei-Chung Wang

J. Manuf. Sci. Eng. October 2013, 135(5): 051007. doi: https://doi.org/10.1115/1.4025013

Abstract

View articletitled, Curing-Induced Distortion Mechanism in Adhesive Bonding of Aluminum AA6061-T6 and Steels

Open the PDF for in another window

Topics: Adhesives , Aluminum , Bonding , Hardening (Curing) , Steel , Transients (Dynamics) , Deformation , Rivets

Extrusion Process Modeling for Aqueous-Based Ceramic Pastes—Part 1: Constitutive Model

Mingyang Li, Lie Tang, Robert G. Landers, Ming C. Leu

J. Manuf. Sci. Eng. October 2013, 135(5): 051008. doi: https://doi.org/10.1115/1.4025014

Abstract

View articletitled, Extrusion Process Modeling for Aqueous-Based Ceramic Pastes—Part 1: Constitutive Model

Open the PDF for in another window

Topics: Ceramics , Extruding , Constitutive equations , Bubbles , Modeling

Extrusion Process Modeling for Aqueous-Based Ceramic Pastes—Part 2: Experimental Verification

Mingyang Li, Lie Tang, Robert G. Landers, Ming C. Leu

J. Manuf. Sci. Eng. October 2013, 135(5): 051009. doi: https://doi.org/10.1115/1.4025015

Abstract

View articletitled, Extrusion Process Modeling for Aqueous-Based Ceramic Pastes—Part 2: Experimental Verification

Open the PDF for in another window

Topics: Extruding , Rheometers , Bubbles , Steady state , Ceramics

Dynamic Model of Oscillation-Assisted Cylindrical Plunge Grinding With Chatter

Witold Pawłowski

J. Manuf. Sci. Eng. October 2013, 135(5): 051010. doi: https://doi.org/10.1115/1.4024819

Abstract

View articletitled, Dynamic Model of Oscillation-Assisted Cylindrical Plunge Grinding With Chatter

Open the PDF for in another window

Topics: Grinding , Grinding wheels , Oscillations , Chatter , Simulation

Avoiding Chatter in Traverse Cylindrical Grinding by Continuous Workpiece Speed Variation

J. Alvarez, M. Zatarain, J. I. Marquinez, N. Ortega, I. Gallego

J. Manuf. Sci. Eng. October 2013, 135(5): 051011. doi: https://doi.org/10.1115/1.4024820

Abstract

View articletitled, Avoiding Chatter in Traverse Cylindrical Grinding by Continuous Workpiece Speed Variation

Open the PDF for in another window

Topics: Grinding , Chatter , Stability

Tool Wear in Cutting Operations: Experimental Analysis and Analytical Models

A. Attanasio, E. Ceretti, C. Giardini, C. Cappellini

J. Manuf. Sci. Eng. October 2013, 135(5): 051012. doi: https://doi.org/10.1115/1.4025010

Abstract

View articletitled, Tool Wear in Cutting Operations: Experimental Analysis and Analytical Models

Open the PDF for in another window

Topics: Artificial neural networks , Cutting , Wear

Dynamic Response of Battery Tabs Under Ultrasonic Welding

Bongsu Kang, Wayne Cai, Chin-An Tan

J. Manuf. Sci. Eng. October 2013, 135(5): 051013. doi: https://doi.org/10.1115/1.4024535

Abstract

View articletitled, Dynamic Response of Battery Tabs Under Ultrasonic Welding

Open the PDF for in another window

Topics: Batteries , Ultrasonic welding , Vibration , Welding , Stiffness

Nanoscale Surface Modifications by Magnetic Field-Assisted Finishing

Raul E. Riveros, Jared N. Hann, Curtis R. Taylor, Hitomi Yamaguchi

J. Manuf. Sci. Eng. October 2013, 135(5): 051014. doi: https://doi.org/10.1115/1.4025190

Abstract

View articletitled, Nanoscale Surface Modifications by Magnetic Field-Assisted Finishing

Open the PDF for in another window

Topics: Finishing , Surface roughness

Transient Temperature and Heat Flux Measurement in Ultrasonic Joining of Battery Tabs Using Thin-Film Microsensors

Hang Li, Hongseok Choi, Chao Ma, Jingzhou Zhao, Hongrui Jiang, Wayne Cai, Jeffrey A. Abell, Xiaochun Li

J. Manuf. Sci. Eng. October 2013, 135(5): 051015. doi: https://doi.org/10.1115/1.4024816

Abstract

View articletitled, Transient Temperature and Heat Flux Measurement in Ultrasonic Joining of Battery Tabs Using Thin-Film Microsensors

Open the PDF for in another window

Topics: Batteries , Calibration , Heat flux , Joining , Manufacturing , Microsensors , Sensors , Temperature , Thin films , Welding

A Computational Fluid Dynamic Analysis of the Effect of Weld Nozzle Geometry Changes on Shielding Gas Coverage During Gas Metal Arc Welding

S. W. Campbell, A. M. Galloway, G. M. Ramsey, N. A. McPherson

J. Manuf. Sci. Eng. October 2013, 135(5): 051016. doi: https://doi.org/10.1115/1.4024817

Abstract

View articletitled, A Computational Fluid Dynamic Analysis of the Effect of Weld Nozzle Geometry Changes on Shielding Gas Coverage During Gas Metal Arc Welding

Open the PDF for in another window

Topics: Computational fluid dynamics , Gas metal arc welding , Geometry , Nozzles , Welding , Gas flow

Automated Shape Optimization of Orienting Devices for Vibratory Bowl Feeders

Daniel Hofmann, Hongrong Huang, Gunther Reinhart

J. Manuf. Sci. Eng. October 2013, 135(5): 051017. doi: https://doi.org/10.1115/1.4025089

Abstract

View articletitled, Automated Shape Optimization of Orienting Devices for Vibratory Bowl Feeders

Open the PDF for in another window

Topics: Algorithms , Design , Optimization , Shape optimization , Simulation , Geometry , Vibration , Optimization algorithms , Shapes

Laser Cutting of Aluminum Foam: Experimental and Model Studies

Bekir Sami Yilbas, S. S. Akhtar, Omer Keles

J. Manuf. Sci. Eng. October 2013, 135(5): 051018. doi: https://doi.org/10.1115/1.4025009

Abstract

View articletitled, Laser Cutting of Aluminum Foam: Experimental and Model Studies

Open the PDF for in another window

Topics: Aluminum , Cooling , Cutting , Laser cutting , Lasers , Temperature , Stress , Thermal stresses , Shapes

Elastic Impact of Abrasives for Controlled Erosion in Fine Finishing of Surfaces

V. S. Sooraj, V. Radhakrishnan

J. Manuf. Sci. Eng. October 2013, 135(5): 051019. doi: https://doi.org/10.1115/1.4025338

Abstract

View articletitled, Elastic Impact of Abrasives for Controlled Erosion in Fine Finishing of Surfaces

Open the PDF for in another window

Topics: Erosion , Particulate matter , Brittleness , Abrasives

Mathematical Modeling for Screw Rotor Form Grinding on Vertical Multi-Axis Computerized Numerical Control Form Grinder

Yu-Ren Wu, Chung-Wen Fan

J. Manuf. Sci. Eng. October 2013, 135(5): 051020. doi: https://doi.org/10.1115/1.4025339

Abstract

View articletitled, Mathematical Modeling for Screw Rotor Form Grinding on Vertical Multi-Axis Computerized Numerical Control Form Grinder

Open the PDF for in another window

Topics: Rotors , Tool grinders , Grinding , Screws , Grinding wheels

Identification of Johnson–Cook and Tresca's Parameters for Numerical Modeling of AISI-304 Machining Processes

Paolo Bosetti, Carlos Maximiliano Giorgio Bort, Stefania Bruschi

J. Manuf. Sci. Eng. October 2013, 135(5): 051021. doi: https://doi.org/10.1115/1.4025340

Abstract

View articletitled, Identification of Johnson–Cook and Tresca's Parameters for Numerical Modeling of AISI-304 Machining Processes

Open the PDF for in another window

Topics: Computer simulation , Cutting , Machining , Optimization , Rheology , Tribology , Simulation , Genetic algorithms , Optimization algorithms , Friction

Technical Briefs

Height Dependent Laser Metal Deposition Process Modeling

Patrick M. Sammons, Douglas A. Bristow, Robert G. Landers

J. Manuf. Sci. Eng. October 2013, 135(5): 054501. doi: https://doi.org/10.1115/1.4025061

Abstract

View articletitled, Height Dependent Laser Metal Deposition Process Modeling

Open the PDF for in another window

Topics: Lasers , Metals , Solidification , Temperature , Temperature gradient , Flow (Dynamics) , Finite element analysis , Shapes , Modeling , Momentum

Sustainability Indicators for Grinding Applied to Dressing Strategies

Barbara Sabine Linke

J. Manuf. Sci. Eng. October 2013, 135(5): 054502. doi: https://doi.org/10.1115/1.4025191

Abstract

View articletitled, Sustainability Indicators for Grinding Applied to Dressing Strategies

Open the PDF for in another window

Topics: Dimensions , Grinding , Sustainability , Manufacturing

Research Papers

Standalone Throughput Analysis on the Wave Propagation of Disturbances in Production Sub-Systems

Improved Rotary Contact Method for 5-Axis Sculptured Surfaces Machining

A New Crack Healing Kinetic Model and Application of Crack Healing Diagram

Predictive Modeling for Glass-Side Laser Scribing of Thin Film Photovoltaic Cells

On the Development of an Experimental Testing Platform for the Vortex Machining Process

Characterization of Fluid Film Produced by an Atomization-Based Cutting Fluid Spray System During Machining

Curing-Induced Distortion Mechanism in Adhesive Bonding of Aluminum AA6061-T6 and Steels

Extrusion Process Modeling for Aqueous-Based Ceramic Pastes—Part 1: Constitutive Model

Extrusion Process Modeling for Aqueous-Based Ceramic Pastes—Part 2: Experimental Verification

Dynamic Model of Oscillation-Assisted Cylindrical Plunge Grinding With Chatter

Avoiding Chatter in Traverse Cylindrical Grinding by Continuous Workpiece Speed Variation

Tool Wear in Cutting Operations: Experimental Analysis and Analytical Models

Dynamic Response of Battery Tabs Under Ultrasonic Welding

Nanoscale Surface Modifications by Magnetic Field-Assisted Finishing

Transient Temperature and Heat Flux Measurement in Ultrasonic Joining of Battery Tabs Using Thin-Film Microsensors

A Computational Fluid Dynamic Analysis of the Effect of Weld Nozzle Geometry Changes on Shielding Gas Coverage During Gas Metal Arc Welding

Automated Shape Optimization of Orienting Devices for Vibratory Bowl Feeders

Laser Cutting of Aluminum Foam: Experimental and Model Studies

Elastic Impact of Abrasives for Controlled Erosion in Fine Finishing of Surfaces

Mathematical Modeling for Screw Rotor Form Grinding on Vertical Multi-Axis Computerized Numerical Control Form Grinder

Identification of Johnson–Cook and Tresca's Parameters for Numerical Modeling of AISI-304 Machining Processes

Technical Briefs

Height Dependent Laser Metal Deposition Process Modeling

Sustainability Indicators for Grinding Applied to Dressing Strategies

Email alerts

RSS Feeds

Journals

Conference Proceedings

eBooks

Resources

Opportunities

Issues

Research Papers

Technical Briefs

Email alerts

RSS Feeds

Journals

Conference Proceedings

eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only