Volume 125 Issue 1 | J. Manuf. Sci. Eng.

Skip Nav Destination

Volume 125, Issue 1

February 2003

ISSN 1087-1357

EISSN 1528-8935

Editorial

Kornel F. Ehmann

J. Manuf. Sci. Eng. February 2003, 125(1): 1–3. doi: https://doi.org/10.1115/1.1560704

Extract

View articletitled, Editorial

Open the PDF for in another window

Topics: Manufacturing , Engineering teachers , Jacks (Lifting equipment)

IN MEMORIAM

J. Manuf. Sci. Eng. February 2003, 125(1): 4–5. doi: https://doi.org/10.1115/1.1560705

Extract

View articletitled, <em>IN MEMORIAM</em>

Open the PDF for in another window

Topics: Engineering teachers , Machine tools , Manufacturing , High speed machining

Technical Papers

Modeling and Prediction of Hole Profile in Drilling, Part 1: Modeling Drill Dynamics in the Presence of Drill Alignment Errors

Khagendra Gupta, O. Burak Ozdoganlar, Shiv G. Kapoor, Richard E. DeVor

J. Manuf. Sci. Eng. February 2003, 125(1): 6–13. doi: https://doi.org/10.1115/1.1536932

Abstract

View articletitled, Modeling and Prediction of Hole Profile in Drilling, Part 1: Modeling Drill Dynamics in the Presence of Drill Alignment Errors

Open the PDF for in another window

Topics: Drills (Tools) , Errors , Vibration , Drilling , Dynamics (Mechanics)

Modeling and Prediction of Hole Profile in Drilling, Part 2: Modeling Hole Profile

Khagendra Gupta, O. Burak Ozdoganlar, Shiv G. Kapoor, Richard E. DeVor

J. Manuf. Sci. Eng. February 2003, 125(1): 14–20. doi: https://doi.org/10.1115/1.1536933

Abstract

View articletitled, Modeling and Prediction of Hole Profile in Drilling, Part 2: Modeling Hole Profile

Open the PDF for in another window

Topics: Drills (Tools) , Errors , Cutting , Vibration

On-Line Chatter Detection Using Wavelet-Based Parameter Estimation

Taejun Choi, Yung C. Shin, Professor

J. Manuf. Sci. Eng. February 2003, 125(1): 21–28. doi: https://doi.org/10.1115/1.1531113

Abstract

View articletitled, On-Line Chatter Detection Using Wavelet-Based Parameter Estimation

Open the PDF for in another window

Topics: Chatter , Cutting , Wavelets , Signals , Milling , Algorithms

An Analytical Design Method for Milling Cutters With Nonconstant Pitch to Increase Stability, Part I: Theory

E. Budak

J. Manuf. Sci. Eng. February 2003, 125(1): 29–34. doi: https://doi.org/10.1115/1.1536655

Abstract

View articletitled, An Analytical Design Method for Milling Cutters With Nonconstant Pitch to Increase Stability, Part I: Theory

Open the PDF for in another window

Topics: Chatter , Milling , Stability , Vibration , Cutting

An Analytical Design Method for Milling Cutters With Nonconstant Pitch to Increase Stability, Part 2: Application

E. Budak

J. Manuf. Sci. Eng. February 2003, 125(1): 35–38. doi: https://doi.org/10.1115/1.1536656

Abstract

View articletitled, An Analytical Design Method for Milling Cutters With Nonconstant Pitch to Increase Stability, Part 2: Application

Open the PDF for in another window

Topics: Chatter , Cutting , Milling , Stability , Analytical design , Grinding , Vibration , Finishes , Design , Machining

The Effect of Flexible-Tool Rotation on Regenerative Instability in Machining

Chen-Jung Li, A. Galip Ulsoy, William J. Endres

J. Manuf. Sci. Eng. February 2003, 125(1): 39–47. doi: https://doi.org/10.1115/1.1536657

Abstract

View articletitled, The Effect of Flexible-Tool Rotation on Regenerative Instability in Machining

Open the PDF for in another window

Topics: Cutting , Machining , Rotation , Stability , Stiffness , Damping

Nonlinear Numerical Analysis in Transient Cutting Tool Temperatures

Tien-Chien Jen, Sunil Eapen, Gustavo Gutierrez

J. Manuf. Sci. Eng. February 2003, 125(1): 48–56. doi: https://doi.org/10.1115/1.1536173

Abstract

View articletitled, Nonlinear Numerical Analysis in Transient Cutting Tool Temperatures

Open the PDF for in another window

Topics: Cutting , Cutting tools , Heat flux , Temperature , Thermal properties , Heat , Transients (Dynamics) , Numerical analysis , Tool steel

Online Identification of Shearing and Plowing Constants in End Milling

J.-J. Junz Wang, Associate Professor, Mem., ASME, C. M. Zheng, Graduate Student

J. Manuf. Sci. Eng. February 2003, 125(1): 57–64. doi: https://doi.org/10.1115/1.1536931

Abstract

View articletitled, Online Identification of Shearing and Plowing Constants in End Milling

Open the PDF for in another window

Topics: Cutting , Die cutting , Milling , Shearing (Deformation)

Intelligent Model-based Optimization of the Surface Grinding Process for Heat-Treated 4140 Steel Alloys With Aluminum Oxide Grinding Wheels

Cheol W. Lee, Graduate Student, Taejun Choi, Graduate Student, Yung C. Shin, Professor

J. Manuf. Sci. Eng. February 2003, 125(1): 65–76. doi: https://doi.org/10.1115/1.1537738

Abstract

View articletitled, Intelligent Model-based Optimization of the Surface Grinding Process for Heat-Treated 4140 Steel Alloys With Aluminum Oxide Grinding Wheels

Open the PDF for in another window

Topics: Grinding , Optimization , Stress

Radial Error Feedback Control for Bar Turning in CNC Turning Centers

Chun Fan, Emmanuel G. Collins,, Jr., Charlie Liu, Ben Wang

J. Manuf. Sci. Eng. February 2003, 125(1): 77–84. doi: https://doi.org/10.1115/1.1537739

Abstract

View articletitled, Radial Error Feedback Control for Bar Turning in CNC Turning Centers

Open the PDF for in another window

Topics: Errors , Feedback , Kalman filters , Cutting , Computer numerical control machine tools

Modeling the Effect of Tramp Oil Contamination on Selective Component Depletion in Metalworking Fluid Systems

Joseph J. Eppert, Graduate Research Assistant,, N. Rajagopalan, Senior Research Engineer,, Richard E. DeVor, Professor, Shiv G. Kapoor, Professor

J. Manuf. Sci. Eng. February 2003, 125(1): 85–94. doi: https://doi.org/10.1115/1.1537259

Abstract

View articletitled, Modeling the Effect of Tramp Oil Contamination on Selective Component Depletion in Metalworking Fluid Systems

Open the PDF for in another window

Topics: Fluids , Petroleum extraction , Water , Modeling , Equilibrium (Physics) , Contamination , Metalworking

A Method for Sensor Selection in Reconfigurable Process Monitoring

Litao Wang, Elijah Kannatey-Asibu,, Jr., Mostafa G. Mehrabi

J. Manuf. Sci. Eng. February 2003, 125(1): 95–99. doi: https://doi.org/10.1115/1.1531145

Abstract

View articletitled, A Method for Sensor Selection in Reconfigurable Process Monitoring

Open the PDF for in another window

Topics: Sensors , Process monitoring

Probe Radius Compensation of Workpiece Localization

Zhenhua Xiong, Zexiang Li, Associate Professor,

J. Manuf. Sci. Eng. February 2003, 125(1): 100–104. doi: https://doi.org/10.1115/1.1537260

Abstract

View articletitled, Probe Radius Compensation of Workpiece Localization

Open the PDF for in another window

Topics: Probes , Errors

Autonomously Generative CMM Part Programming for In-Process Inspection

Jiancheng Liu, Hung Ng, Kazuo Yamazaki, Kazuo Nakanishi

J. Manuf. Sci. Eng. February 2003, 125(1): 105–112. doi: https://doi.org/10.1115/1.1536175

Abstract

View articletitled, Autonomously Generative CMM Part Programming for In-Process Inspection

Open the PDF for in another window

Topics: Computer programming , Coordinate measuring machines , Cylinders , Inspection , Probes , Machining , Computer-aided design

Modeling and Closed-Loop Control of Stretch Bending of Aluminum Rectangular Tubes

Hong Zhu, Graduate Student, Kim A. Stelson, Professor

J. Manuf. Sci. Eng. February 2003, 125(1): 113–119. doi: https://doi.org/10.1115/1.1536659

Abstract

View articletitled, Modeling and Closed-Loop Control of Stretch Bending of Aluminum Rectangular Tubes

Open the PDF for in another window

Topics: Aluminum , Control algorithms , Deformation , Flanges , Modeling , Stress , Tension , Surface roughness , Errors

Robust Fixture Configuration Design for Sheet Metal Assembly With Laser Welding

Bing Li, B. W. Shiu, K. J. Lau

J. Manuf. Sci. Eng. February 2003, 125(1): 120–127. doi: https://doi.org/10.1115/1.1536172

Abstract

View articletitled, Robust Fixture Configuration Design for Sheet Metal Assembly With Laser Welding

Open the PDF for in another window

Topics: Design , Laser welding , Manufacturing , Sheet metal , Response surface methodology , Metals

Sliver Generation Reduction in Trimming of Aluminum Autobody Sheet

Ming Li, Mem. ASME

J. Manuf. Sci. Eng. February 2003, 125(1): 128–137. doi: https://doi.org/10.1115/1.1540113

Abstract

View articletitled, Sliver Generation Reduction in Trimming of Aluminum Autobody Sheet

Open the PDF for in another window

Topics: Aluminum , Blades , Clearances (Engineering) , Cutting , Steel sheet , Manufacturing , Aluminum alloys

Heat Transfer in Friction Stir Welding—Experimental and Numerical Studies

Yuh J. Chao, Mem. ASME, X. Qi, W. Tang

J. Manuf. Sci. Eng. February 2003, 125(1): 138–145. doi: https://doi.org/10.1115/1.1537741

Abstract

View articletitled, Heat Transfer in Friction Stir Welding—Experimental and Numerical Studies

Open the PDF for in another window

Topics: Friction , Heat , Heat transfer , Temperature , Welding , Temperature distribution , Heat flux , Joining , Finite element analysis , Steady state

Ideal Forming Analysis for Random Fiber Preforms

Richard B. Dessenberger, Charles L. Tucker, III

J. Manuf. Sci. Eng. February 2003, 125(1): 146–153. doi: https://doi.org/10.1115/1.1536658

Abstract

View articletitled, Ideal Forming Analysis for Random Fiber Preforms

Open the PDF for in another window

Topics: Fibers , Preforms , Finite element analysis , Deformation , Flanges , Forming limit diagrams , Shapes

Modeling and Control of an Electro-hydraulic Injection Molding Machine With Smoothed Fill-to-Pack Transition

Danian Zheng, Andrew Alleyne

J. Manuf. Sci. Eng. February 2003, 125(1): 154–163. doi: https://doi.org/10.1115/1.1540126

Abstract

View articletitled, Modeling and Control of an Electro-hydraulic Injection Molding Machine With Smoothed Fill-to-Pack Transition

Open the PDF for in another window

Topics: Control equipment , Cycles , Dynamics (Mechanics) , Flow (Dynamics) , Iterative learning control , Modeling , Packing (Shipments) , Packings (Cushioning) , Polymer melts , Polymers

Definition and Application of a Process Flexibility Index

David Kazmer, David Hatch, Liang Zhu, Christoph Roser, Deepak Kapoor

J. Manuf. Sci. Eng. February 2003, 125(1): 164–171. doi: https://doi.org/10.1115/1.1536174

Abstract

View articletitled, Definition and Application of a Process Flexibility Index

Open the PDF for in another window

Topics: Design , Manufacturing , Product development , Product quality , Probability

Technical Brief

Transient Flow in Abrasive Suspension Jet Cutting Machines on Pump Shutdown

S. Wan, Research Fellow, G. C. Lim, Principle Research Fellow

J. Manuf. Sci. Eng. February 2003, 125(1): 172–178. doi: https://doi.org/10.1115/1.1536176

Abstract

View articletitled, Transient Flow in Abrasive Suspension Jet Cutting Machines on Pump Shutdown

Open the PDF for in another window

Topics: Flow (Dynamics) , Machinery , Nozzles , Pressure vessels , Pumps , Unsteady flow , Cutting , Jet cutting

Erratum

Erratum: “Intelligent Sliding Mode Control of Cutting Force During Single-Point Turning Operations” [ASME J. Manuf. Sci. Eng., 123, No. 2, pp. 206–213]

G. D. Buckner

J. Manuf. Sci. Eng. February 2003, 125(1): 179. doi: https://doi.org/10.1115/1.1537742

Extract

View articletitled, Erratum: “Intelligent Sliding Mode Control of Cutting Force During Single-Point Turning Operations” [ASME J. Manuf. Sci. Eng., 123, No. 2, pp. 206–213]

Open the PDF for in another window

Topics: Cutting , Sliding mode control , Turning , Artificial neural networks , Machining , Production control , Robust control

Editorial

IN MEMORIAM

Technical Papers

Modeling and Prediction of Hole Profile in Drilling, Part 1: Modeling Drill Dynamics in the Presence of Drill Alignment Errors

Modeling and Prediction of Hole Profile in Drilling, Part 2: Modeling Hole Profile

On-Line Chatter Detection Using Wavelet-Based Parameter Estimation

An Analytical Design Method for Milling Cutters With Nonconstant Pitch to Increase Stability, Part I: Theory

An Analytical Design Method for Milling Cutters With Nonconstant Pitch to Increase Stability, Part 2: Application

The Effect of Flexible-Tool Rotation on Regenerative Instability in Machining

Nonlinear Numerical Analysis in Transient Cutting Tool Temperatures

Online Identification of Shearing and Plowing Constants in End Milling

Intelligent Model-based Optimization of the Surface Grinding Process for Heat-Treated 4140 Steel Alloys With Aluminum Oxide Grinding Wheels

Radial Error Feedback Control for Bar Turning in CNC Turning Centers

Modeling the Effect of Tramp Oil Contamination on Selective Component Depletion in Metalworking Fluid Systems

A Method for Sensor Selection in Reconfigurable Process Monitoring

Probe Radius Compensation of Workpiece Localization

Autonomously Generative CMM Part Programming for In-Process Inspection

Modeling and Closed-Loop Control of Stretch Bending of Aluminum Rectangular Tubes

Robust Fixture Configuration Design for Sheet Metal Assembly With Laser Welding

Sliver Generation Reduction in Trimming of Aluminum Autobody Sheet

Heat Transfer in Friction Stir Welding—Experimental and Numerical Studies

Ideal Forming Analysis for Random Fiber Preforms

Modeling and Control of an Electro-hydraulic Injection Molding Machine With Smoothed Fill-to-Pack Transition

Definition and Application of a Process Flexibility Index

Technical Brief

Transient Flow in Abrasive Suspension Jet Cutting Machines on Pump Shutdown

Erratum

Erratum: “Intelligent Sliding Mode Control of Cutting Force During Single-Point Turning Operations” [ASME J. Manuf. Sci. Eng., 123, No. 2, pp. 206–213]

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

Issues

Technical Papers

Technical Brief

Erratum

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only